Enabling Devices 782R User manual

For Technical Support:
For Technical Support:For Technical Support:
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST
1-800-832-8697
[e-mail]
Gumball Switches #782R, B, G, Y, P
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Most popular!
Most popular!Most popular!
Most popular!
A high quality and dependable switch. Meets most needs of switch
users. It features a 2½ inch activation surface and is recommended
for all who can access a smaller target area. Provides extraordinary
tactile and audible feedback. Base has three holes for easy mounting.
Mounting plate is removable. Comes with two free clear plastic
covers: one with a lip, one without. Size: 3¼"Base x ¾"H. Weight: ¼
lb.
Operation:
Operation:Operation:
Operation:
1. The Gum Ball Switch does not
notnot
not require any batteries to operate.
2. The Gum Ball Switches come with a removable base. To remove
the base turn the switch over and unscrew the two Phillips Head
screws. Next pull the base ring off the switch.
3. Plug the Gum Ball Switch into the jack on your switch-adapted
toy/device.
4. If it is necessary for you to use an adapter, make sure that you use
a MONO adapter, not a STEREO adapter.
5. Make sure that the connection between the Gum Ball Switch and
your toy/device is tight. There should be no gaps.
6. Simply press anywhere on the Gum Ball Switch’s colored top to
activate your toy/device.
7. The toy/device will only remain activated while the Gum Ball
Switch continues to be actuated. Once you release the switch, the
toy/device will turn off.
Troubleshooting:
Troubleshooting:Troubleshooting:
Troubleshooting:
Problem:
Problem: Problem:
Problem: The Gum Ball Switch does not activate your toy/device.
Action #1:
Action #1: Action #1:
Action #1: Make sure that the connection between the Gum Ball
Switch and your toy/device is tight. There should be no
no no
no gaps. This is
a common error and an easy fix.
Action #2:
Action #2: Action #2:
Action #2: Try a different switch with your toy/device to rule out the
toy/device as the source of the problem.
Action #3:
Action #3: Action #3:
Action #3: Try a different adapter (if applicable to rule this out as the
source of the problem.
Care of Unit:
Care of Unit:Care of Unit:
Care of Unit:
The Gum Ball Switch can be wiped clean with any household multi-
purpose cleaner and disinfectant. We recommend Simple Green,
which is a non toxic biodegradable all-purpose cleaner.
Do not submerge
Do not submergeDo not submerge
Do not submerge the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners,
Do not use abrasive cleaners,Do not use abrasive cleaners,
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Rev
Rev Rev
Rev 2
22
2/14
/14/14
/14/1
/1/1
/17
77
7