Enabling Devices 7225B User manual

For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
-800-832-8697
[e-mail]
Textured Plate Switches #7225B (Blue),
7225O (Oran e), 7225R (Red), 7225Y
(Yellow)
(Set of 4) #7226
USER’S GUIDE
50 Broadway
Hawthorne, NY 0532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Light-touch tactile switches activate with the slightest movement.
Four textures in four colors to choose from: blue with inverse
bumps, orange with thin ridges, red with wide ridges, and yellow
with bumps. Buy all four and save. Size: 4"L x 6"W x ½"H.
Weight: ½ lb.
Operation:
. The Textured Switch does not require any batteries to
operate.
2. Plug the Textured Switch into the jack on your switch-adapted
toy/device.
3. If it is necessary for you to use an adapter, make sure that
you use a MONO adapter, not a STEREO adapter.
4. Make sure that the connection between the Textured Switch
and your toy/device is plugged in all the way. There should be
no gaps.
5. Simply press anywhere on the Textured Switch’s textured
colored top to activate your toy/device.
6. The toy/device will only remain activated while the Textured
Switch continues to be actuated. Once you release the switch,
the toy/device will turn off.
Troubleshootin :
Problem: The Textured Switch does not activate your
toy/device.
Action #1: Make sure that the connection between the Textured
Switch and your toy/device is plugged in all the way. There
should be no gaps. This is a common error and an easy fix.
Action #2: Try a different switch with your toy/device to rule out
the toy/device as the source of the problem.
Action #3: Try a different adapter (if applicable) to rule this out as
the source of the problem.
Care of Unit:
The Textured Switch can be wiped clean with any household
multi-purpose cleaner and disinfectant. We recommend Simple
Green, which is a nontoxic biodegradable all-purpose cleaner.
Do not submer e the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners, as they will scratch the surface
of the unit.
Rev 2/28/19