Enabling Devices 783R User manual

For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
-800-832-8697
[e-mail]
Mini Gum Ball Switches #783R, B, G, Y,
P
SER’S G IDE
50 Broadway
Hawthorne, NY 0532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

The Mini-Gumball switch is versatile and durable. It has a ¼
inch activation surface. This switch is small enough to be easily
mounted anywhere. Base has three holes for easy mounting. It
provides tactile and audible feedback. Mounting plate is
removable. Size: 2"Base x ½"H. Weight: oz.
Operation:
. The Mini Gum Ball Switch does not require any batteries to
operate. The base is removable if desired.
2. Plug the Mini Gum Ball Switch into the jack on your switch-
adapted toy/device.
4. If it is necessary for you to use an adapter, make sure that
you use a MONO adapter, not a STEREO adapter.
5. Make sure that the connection between the Mini Gum Ball
Switch and your toy/device is plugged in all the way. There
should be no gaps.
6. Simply press anywhere on the Mini Gum Ball Switch’s colored
top to activate your toy/device.
7. The toy/device will only remain activated while the Mini Gum
Ball Switch continues to be actuated. Once you release the
switch, the toy/device will turn off.
Troubleshooting:
Problem: The Mini Gum Ball Switch does not activate your
toy/device.
Action #1: Make sure that the connection between the Mini Gum
Ball Switch and your toy/device is tight. There should be no gaps.
This is a common error and an easy fix.
Action #2: Try a different switch with your toy/device to rule out
the toy/device as the source of the problem.
Action #3: Try a different adapter (if applicable) to rule this out as
the source of the problem.
Care of nit:
The Gum Ball Switch can be wiped clean with any household
multi-purpose cleaner and disinfectant. We recommend Simple
Green, which is a non toxic biodegradable all-purpose cleaner.
Do not submerge the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners, as they will scratch the surface
of the unit.
Rev 2/14/17