Enabling Devices Foot Switch User manual

Foot Switch #6000
USER’S GUIDE

Easy to use!
Our durable foot switch with non-skid material activates toys or devices
with light foot pressure. Place it anywhere and you are ready to go. Size:
3 1/2"L x 2 1/2"W.
Operation:
1. The Foot Switch does not require any batteries to operate.
2. Plug the Foot Switch into the jack on your switch-adapted
toy/device.
4. If it is necessary for you to use an adapter, make sure that you use a
MONO adapter, not a STEREO adapter.
5. Make sure that the connection between the Foot Switch and your
toy/device is tight. There should be no gaps.
6. Simply press anywhere on the Foot Switch to activate your
toy/device.
7. The toy/device will only remain activated while the Foot Switch
continues to be actuated. Once you release the switch, the
toy/device will turn off.
Troubleshooting:
Problem: The Foot Switch does not activate your toy/device.
Action #1: Make sure that the connection between the Foot Switch and
your toy/device is tight. There should be no gaps. This is a common
error and an easy fix.
Action #2: Try a different switch with your toy/device to rule out the
toy/device as the source of the problem.
Action #3: Try a different adapter (if applicable) to rule this out as the
source of the problem.
Care of Unit:
The Foot Switch can be wiped clean with any household multi-purpose
cleaner and disinfectant. We recommend Simple Green, which is a non
toxic biodegradable all-purpose cleaner.
Do not submerge the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Rev 3/2/11