Enabling Devices 718-S User manual

For Technical Support:
For Technical Support:For Technical Support:
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST
1-800-832-8697
[e-mail]
Mini Saucer Switch #718-S
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Mini Saucer Sw
Mini Saucer SwMini Saucer Sw
Mini Saucer Switch
itchitch
itch
Ideal for those with limited motor abilities!
These handy switches are specially designed for individuals
who are unable to control or sustain the hand or wrist
movements necessary to operate traditional plate switches.
The Mini-Saucer and Saucer Switch are activated with just a
light touch. The Adjustable Pressure Saucer Switch allows the
user to adjust the pressure from approximately ½ to 32
ounces and has a small LED lamp that glows when the switch
is activated. Size: 3¼"L x 3¼"W x 1"H. Weight: ¼ lb.
Operation:
Operation:Operation:
Operation:
1. The Mini Saucer Switch does not
notnot
not require any batteries to
operate.
2. Plug the Mini Saucer Switch into the jack on your switch-
adapted toy/device.
3. If it is necessary for you to use an adapter, make sure that
you use a MONO adapter, not a STEREO adapter.
4. Make sure that the connection between the Mini Saucer
Switch and your toy/device is tight. There should be no
gaps.
5. Simply press anywhere on the saucer switch to activate
your toy/device.
6. The toy/device will only remain activated while the Mini
Saucer Switch continues to be actuated. Once you release
the switch, the toy/device will turn off.
Troubleshooting:
Troubleshooting:Troubleshooting:
Troubleshooting:
Problem:
Problem: Problem:
Problem: The Mini Saucer Switch does not activate your
toy/device.
Action #1:
Action #1: Action #1:
Action #1: Make sure that the Mini Saucer Switch is on a flat
surface (not tilted or vertical . This provides for optimal
functioning.
Action #2:
Action #2: Action #2:
Action #2: Make sure that the connection between the Mini
Saucer Switch and your toy/device is tight. There should be no
no no
no
gaps. This is a common error and an easy fix.
Ac
AcAc
Action #3:
tion #3: tion #3:
tion #3: Try a different switch with your toy/device to rule
out the toy/device as the source of the problem.
Care of Unit:
Care of Unit:Care of Unit:
Care of Unit:
The Mini Saucer Switch can be wiped clean with any household
multi-purpose cleaner and disinfectant.
Do not submerge
Do not submergeDo not submerge
Do not submerge the unit, as it will damage the contents and
the electrical components.
Do not use abrasive cleaners,
Do not use abrasive cleaners,Do not use abrasive cleaners,
Do not use abrasive cleaners, as they will scratch the
surface of the unit.
Rev
RevRev
Rev 4/17/17
4/17/174/17/17
4/17/17