Epson S1C17M03 User manual

© Seiko Epson Corporation. 2022. All right reserved.
S1C17M03
Software Setup Guide

2
Contents
◆Introduction
◆Working Environment
◆About GNU 17V3
◆About ICDmini V3
◆About user sites
◆Program development
◆Evaluation board connection
◆From program writing to debugging
◆Reference

3
Introduction
This setup guide explains how to install the C compiler package, which is
GNU17V3, import sample projects, build the projects, connect an emulator and
an evaluation board, and execute the program.

4
Working Environment
PC(OS:Windows10):
⁃
S1C17 Software Integrated
Development Environment (GNU17V3)
⁃
Latest model-specific information file
⁃
Sample software and PC software
emulator:
⁃
S5U1C17001H3(ICDminiV3)
⁃
USB cable
⁃
10-pin connector
Evaluation board for S1C17Family:
⁃
S5U1C17M03T

5
About GNU 17V3
GNU17V3 is a software integrated development environment for developing
software on a PC. GNU17V3 includes a set of software tools and utilities that
compile C source programs, assemble assembly source programs, debug them,
and create executable and motorola files.
◆Operating environment (OS): Windows10
◆Development environment base: Eclipse
◆Available languages: C and assembler
◆Compiler: gcc compiler (gcc4 and gcc6)
IDE(Software development) GDB(Software debug)

6
About ICDmini V3
S5U1C17001H (ICDmini) connects the S1C17 microcomputer on the target
system and GNU17V3, and provides an environment for debugging on the target
system together with GNU17V3.

7
About user sites
We publish information related to the target MCU on the user site. Please download the
latest GNU 17V3 and model-specific information files required for software development
from the following.
16bit Microcontroller -Software Tool- Products - Semicon Top –Epson

8
Program development

9
Booting GNU 17V3
1. To start GNU17, please start from Windows Startup Menu,
and continue in order of [EPSON MCU] > [GNU17V3 IDE].
2. Please select a Workspace.
3. After a while, GNU17 is started. Please click on
[Workbench] to close the Welcome window (the welcome
window shows up only the initial startup.)

10
Importing sample projects（1）
1. Please click on [File] at the upper left corner, and
select [Import].
1. Please select [Existing Projects into Workspace]
under [General], and click [Next>].