Epson SC-F2200 Series Configuration guide

General Information
CMP0413-00 EN

Copyrights and Trademarks
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is
designed only for use with this Epson printer. Epson is not responsible for any use of this information as applied to other printers.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses
incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations
to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions.
Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than
those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
Seiko Epson Corporation shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface
cables other than those designated as Epson Approved Products by Seiko Epson Corporation.
Microsoft
®
and Windows
®
are registered trademarks of Microsoft Corporation.
Mac and macOS are registered trademarks of Apple Inc.
Intel
®
is a registered trademark of Intel Corporation.
Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Yo u Tu b e
®
and the YouTube logo are registered trademarks or trademarks of YouTube, LLC.
Firefox is a trademark of the Mozilla Foundation in the U.S. and other countries.
Chrome
™
is a trademark of Google Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims
any and all rights in those marks.
© 2023 Seiko Epson Corporation.
SC-F2200 Series General Information
Copyrights and Trademarks
2

Contents
Copyrights and Trademarks
Notes on Manuals
MeaningofSymbols........................ 4
Screenshots.............................. 4
Illustrations.............................. 4
ManualOrganization....................... 4
ViewingVideoManuals..................... 4
ViewingPDFManuals.......................5
Using the Printer
Overview................................ 6
AttachingaGripPad........................7
LoadingtheT-shirt(media)...................8
StartPrinting............................ 11
System conditions
EpsonEdgeDashboard..................... 12
GarmentCreator2........................ 13
Garment Creator Easy Print System (Windows
Only).................................. 13
WebConfig............................. 14
Specifications Table
SC-F2200 Series General Information
Contents
3

Notes on Manuals
Meaning of Symbols
This manual uses the following symbols to indicate
dangerous operations or handling procedures to
prevent harm to users or other people or damage to
property. Make sure you understand these warnings
before reading the content of this manual.
Warning: Warnings must b e
followed to avoid serious
bodily injury.
Caution: Cautions must be
followed to avoid bodily
injury.
c
Important: Important must be
followed to avoid damage
to this product.
Note: Notes contain useful or
additional information on
the operation of this
product.
UIndicates related reference
content.
Screenshots
The screenshots used in this manual may differ
slightly from the actual screens.
Illustrations
The illustrations may differ slightly from the model
you are using. Please be aware of this when using the
manual.
Manual Organization
The manuals for the product are organized as shown
below.
You can view the PDF manuals using Adobe Reader or
Preview (Mac OS X).
Setup Guide
(booklet)
Provides information on how
to setup the printer after
unpacking it from the box.
Make sure you read this
manual to perform operations
safely.
General Information
(this manual)
This manual provides
specifications and contact
details for the product.
Safety Instructions This section provides
information that must be
followed to prevent harm
to users or other people or
damage to property. Make
sure you read this section to
perform operations safely and
correctly. For some regions,
this content is included in the
Setup Guide.
Epson Support (PDF) Provides information about
Epson Support for each region.
Online Manuals
User's Guide
(PDF)
This manual explains how to
use the printer.
Epson Video
Manuals
These videos show you how
to load media and perform
maintenance.
Network Guide
(PDF)
This manual provides
information on using the
printer over a network.
Epson Support
(PDF)
Provides information about
Epson Support for each region.
Viewing Video Manuals
The video manuals have been uploaded to YouTube.
Click Epson Video Manuals from the top page of
Online Manuals, or click the following blue text to
view the manuals.
SC-F2200 Series General Information
Notes on Manuals
4

Epson Video Manuals
If the subtitles are not displayed when you play the
video, click the subtitles icon shown in the image
below.
Viewing PDF Manuals
This section uses the Adobe Acrobat Reader DC as
an example to explain the basic operations for viewing
the PDF in Adobe Reader.
AClick to print the PDF manual.
BEach time it is clicked the bookmarks are hidden
or shown.
CClick the title to open the relevant page.
Click [+] to open the titles lower in the hierarchy.
DIf the reference is in blue text, click the blue text to
open the relevant page.
To return to the original page, do the following.
For Windows
While pressing the Alt key, press the key.
For Mac
While pressing the command key, press the
key.
EYou can input and search for keywords, such as the
names of items you want to confirm.
For Windows
Right click on a page in the PDF manual and select
Find in the menu that is displayed to open the
search toolbar.
For Mac
Select Find in the Edit menu to open the search
toolbar.
FTo enlarge text in the display that is too small to
see well, click . Click to reduce the size. To
specify a part of an illustration or screenshot to
enlarge, do the following.
For Windows
Right click on the page in the PDF manual
and select Marquee Zoom in the menu that is
displayed. The pointer changes to a magnifying
glass, and you can use it to specify the range of the
place you want to enlarge.
For Mac
Click View menu - Zoom - Marquee Zoom in this
order to change the pointer to a magnifying glass.
Use the pointer as a magnifying glass to specify the
range of the place you want to enlarge.
GOpens the previous page or next page.
SC-F2200 Series General Information
Notes on Manuals
5

Using the Printer
Overview
This section explains the process from loading cotton media on the supplied platen to printing with color ink only.
To use the optional platen or print with White ink, see the User’s Guide (Online Manual).
Work Item Summary
ACreating/Sending Jobs Send the job created by laying out images in Garment Creator 2, to this
printer.
See the Garment Creator 2 manual for more details.
BLoading the T-shirt (media) Attach the platen to the printer, and then load the T-shirt (media).
U“Loading the T-shirt (media)” on page8
When using the platen for the first time, attach the grip pad supplied
beforehand.
U“Attaching a Grip Pad” on page7
CPrinting Confirm that the job has been received and the lamp on the xbutton on
the printer is lit before you start printing.
U“Start Printing” on page11
DFixing the Ink Remove the T-shirt from the printer, and then fix the ink in a heat press or
oven.
The optimum conditions vary depending on the media fabric or the
device for fixing ink.
See the User's Guide (Online Manual) for more details.
Note:
In the following situations, you need to apply a pre-treatment liquid to the printing surface before loading the media.
❏When printing White ink on cotton media
❏When printing on polyester media (in any ink color)
Applying a pre-treatment liquid will fix the ink to the T-shirt and improve the color development.
See the User's Guide (Online Manual) for more details.
SC-F2200 Series General Information
Using the Printer
6

Attaching a Grip Pad
A
Only peel off one section on the back of the
grip pad as shown in the illustration.
B
Place the platen on a flat surface, align the
corners of the grip pad so they are slightly
inside the corners of the platen, and then fasten
the adhesive side of the grip pad to the platen.
Do not allow the corners of the grip pad
from which the back has not been removed to
protrude from the edges of the other side of the
platen.
C
Gently press on the section from which the
back has been peeled off the grip pad to stick
the grip pad onto the platen.
D
Peel off all of the other sections on the back of
the grip pad as shown in the illustration.
E
Stick it from the end that is already stuck, as
shown in the illustration.
SC-F2200 Series General Information
Using the Printer
7

Loading the T-shirt
(media)
You can check the procedure in a video on YouTube.
Epson Video Manuals
A
Press the Pbutton to turn on the printer.
B
Hold the supplied platen so that the hanger is
facing you, and insert it so that the shaft of the
platen fits into the slot.
Note:
If the platen does not move forward, press the }
button to move it forward.
C
On the printer's screen, confirm that Platen
Gap is set to Auto.
D
Loosen the fixing lever.
E
Move the lever clockwise to set the scale to P.
When the scale is at P, the platen is at its
highest position; the platen position lowers as
the number increases.
Moving the lever in the counterclockwise
direction increases the numbers, which lowers
the platen position.
Moving the lever in the clockwise direction
decreases the numbers, which raises the platen
position.
SC-F2200 Series General Information
Using the Printer
8

F
Tighten the fixing lever, and then secure the
platen gap lever.
G
Slide the hem of the T-shirt over the platen
from the front.
The line inside the frame in the illustration
indicates the center of the platen.
H
Pull the parts of the shirt that extend beyond
the platen to flatten the print surface.
c
Important:
Do not pull too hard on the T-shirt. If
the T-shirt is stretched too much, the print
quality may decline due to deformed images
and so on, and the white under-base print
may extend outside the image.
SC-F2200 Series General Information
Using the Printer
9

I
Remove any lint from the printing surface, and
press the fibers flat.
There may be lint on the T-shirt if you have
not applied pre-treatment liquid. Remove the
lint using the sticky tape or roller and press the
fibers flat using the hard roller. Lint and fibers
may stick to the print head and stain other
areas.
J
Remove any slack or creases from the printing
surface and make it flat.
c
Important:
The printer detects the highest part of the
print surface. If there is any slack or creasing
as shown in the illustration below, the
distance between the print head and the print
surface may increase and print quality may
decline. Flatten the T-shirt so that there is no
slack or creasing.
Use the grip pad tool supplied to flatten the
printing surface. The T-shirt sticks to the grip
on the platen keeping it flat and preventing it
from moving during printing.
SC-F2200 Series General Information
Using the Printer
10

Press the T-shirt lightly with the grip pad tool
and move it vertically and horizontally from
the edges as shown in the following illustration.
Repeat this step 2 or 3 times to remove any
slack or creases and make the printing surface
flat.
K
Tuck in the T-shirt so that it does not drape
over the movable base.
Start Printing
A
When a job has been completely received, the
preview display opens on the screen and the
lamp on the xbutton turns on.
B
Check that the T-shirt is loaded, and then press
the xbutton.
SC-F2200 Series General Information
Using the Printer
11

System conditions
The software can be used in the following environments. (As of April, 2023)
Supported OS and other elements may change.
For the latest information, see the Epson Web site.
Epson Edge Dashboard
c
Important:
Make sure the computer on which the Epson Edge Dashboard is installed meets the following requirements.
If these requirements are not met, the software cannot monitor the printer correctly.
❏Disable your computer's hibernate function.
❏Disable the sleep function so that the computer does not enter sleep status.
Windows
Operating system Windows 7 SP1
*
/Windows 7 x64 SP1
*
Windows 8
*
/Windows 8 x64
*
Windows 8.1
*
/Windows 8.1 x64
Windows 10
*
/Windows 10 x64
Windows 11
CPU Intel Core2Duo 2.5GHz or more
Free memory 1 GB or more
Hard disk
(free space during installation)
2 GB or more
Display resolution 1280 x 1024 or better
Communication interface High Speed USB
Ethernet 1000Base-T
Browser Internet Explorer 11
Microsoft Edge
*Does not support Garment Creator 2.
Mac OS X
Operating system Mac OS X 10.7 Lion or later
*
CPU Intel Core2Duo 2.5GHz or more
Free memory 1 GB or more
SC-F2200 Series General Information
System conditions
12

Hard disk
(free space during installation)
2 GB or more
Display resolution 1280 x 1024 or better
Communication interface High Speed USB
Ethernet 1000Base-T
Browser Safari 6 or later
*mac OS X 10.11 or earlier does not support Garment Creator 2.
Garment Creator 2
Windows
Operating system Windows 8.1 x64/Windows 10 x64/Windows 11
CPU Multi-core processor (Intel Core i7 8th generation or later recommended)
Memory capacity 2 GB or more (16GB or more recommended)
Storage
(free space during installation)
HDD 32 GB or more (SSD recommended)
Display resolution 1024 x 768 or better
Communication interface High Speed USB
Ethernet 1000Base-T
Mac
Operating system Universal binary (64-Bit Intel and ARM) supported for macOS 10.12 and later.
CPU Multi-core processor (Intel Core i7 8th generation or later recommended)
Memory capacity 2 GB or more (16GB or more recommended)
Storage
(free space during installation)
HDD 32 GB or more (SSD recommended)
Display resolution 1024 x 768 or better
Communication interface High Speed USB
Ethernet 1000Base-T
Garment Creator Easy Print System (Windows Only)
Operating system Windows 8.1 x64/Windows 10 x64/Windows 11
CPU Multi-core processor (Intel Core i7 8th generation or later recommended)
Memory capacity 2 GB or more (16GB or more recommended)
SC-F2200 Series General Information
System conditions
13

Storage
(free space during installation)
HDD 32 GB or more (SSD recommended)
Display resolution 1024 x 768 or better
Communication interface High Speed USB
Ethernet 1000Base-T
Web Config
The following is a list of supported browsers. Make sure you are using the latest version.
Internet Explorer 11, Microsoft Edge, Firefox, Chrome, Safari
SC-F2200 Series General Information
System conditions
14

Specifications Table
Printer Specifications
Printing method On-demand ink jet
Nozzle configuration
White ink mode White: 400 nozzles x 4 rows
Color: 400 nozzles x 4 colors
(Black, Cyan, Magenta, Yellow)
Color ink mode Color: 400 nozzles x 4 colors
(Black, Cyan, Magenta, Yellow)
High speed
color mode
Color: 400 nozzles x 2 rows x
4 colors (Black, Cyan, Magenta,
Yellow)
Resolution (maxi‐
mum)
1200 x 1200 dpi
Control code ESC/P raster (undisclosed
command)
Platen feed meth‐
od
Conveyor belt
Built-in memory 1 GB
Interface
USB Hi-Speed USB x 2 (rear: 1 for
computer connection, front: 1 for
USB memory)
Ethernet
*1
standards
IEEE802.3i (10BASE-T)
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)
IEEE 802.3az (Energy-saving
model. Requires a connection
device that supports IEEE802.3az.)
Rated voltage AC100-240 V
Rated frequency 50/60 Hz
Rated current 3.4-1.6A
Power consumption
While printing Approx. 46 W
Ready mode Approx. 30 W
Sleep mode Approx. 7 W
Power off Approx. 0.3 W
Printer Specifications
Temperature Recommended: 15 to 25 ˚C (59 to
77 ˚F)
Operating: 10 to 35 ˚C (50 to 95 ˚F)
Storage (before unpacking): -20 to
40 ˚C (-4 to 104 ˚F) (within 120
hours at 60 ˚C /140 ˚F, within one
month at 40 ˚C /104˚F)
Storage (after unpacking): -20 to
40 ˚C (-4 to 104 ˚F) (within one
month at 40 ˚C /104 ˚F)
Humidity
(without conden‐
sation)
Recommended: 40 to 60%
Operating: 20 to 80%
Storage: 5 to 85%
Operating temperature/humidity
Gray area: Operating
Cross-hatch lines: Recommended
Dimension
(When supplied
platen is installed)
(W) 981 x (D) 1448 x (H) 499 mm
([W] 38.6 x [D] 57.0 x [H] 19.6 in.)
Weight
(When supplied
platen is installed,
not including ink
supply units)
Approx. 94.5 kg (Approx. 208.3
pounds)
Supported Media Types (T-shirts)
SC-F2200 Series General Information
Specifications Table
15

Printer Specifications
Thickness 27 mm or less (1.06 in. or less)
*2
Weight 1.5 kg or less (3.31 pounds or less)
Material
*3
❏Fabric with a cotton blend
ratio of 100% to 50%
(We recommend using thick
fabric with a 100% blend ratio
and a high density weave.)
❏Fabric with a polyester blend
ratio of 100% to 50%
(We recommend using a
polyester blend ratio of
100%.)
*1 Use a shielded twisted pair cable (category 5 or
higher).
*2 The maximum usable media thickness varies
depending on the platen on which the media is
loaded. See the following for details.
UUser’s Guide (Online Manual)
*3 When printing on cotton T-shirts with white
ink or when printing on polyester T-shirts,
make sure you apply a pre-treatment liquid
beforehand.
Note:
To ensure the colors you want to print, maintain a
constant room temperature of 15 to 25 ˚C (59 to 77 ˚F).
c
Important:
Use this printer at altitudes below 2000 m (6,562
ft.).
Warning:
This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.
For Users in EU Countries
Information of EU declaration of conformity:
The full text of the EU declaration of conformity of
this equipment is available at the following internet
address.
https://www.epson.eu/conformity
ZICTA Type Approval for Users in Zambia
See the following website to check the information for
ZICTA Type Approval.
https://support.epson.net/zicta/
Specifications for the ink supply unit and the clean‐
ing ink supply unit
Type Dedicated ink pack
Types of ink Pigment ink
Expiry date Time limit printed on the package
and ink supply unit (when stored
at normal temperature)
Print quality
guarantee expiry
1 year (after installed in printer)
Temperature Operating: 10 to 35 ˚C (50 to 95 ˚F)
In storage (in package) and after
installation in printer: -20 to 40 ˚C
(-4 to 104 ˚F)
(within 4 days at -20 ˚C /-4 ˚F, a
month at 40 ˚C /104 ˚F)
Transporting (in package): -20 to
60 ˚C (-4 to 140 ˚F) (within 4 days
at -20 ˚C /-4 ˚F, a month at 40
˚C /104 ˚F, 72 hours at 60 ˚C /140
˚F)
Dimensions (W) 117 x (D) 360 x (H) 30 mm
([W] 4.6 x [D] 14.2 x [H] 1.2 in.)
Capacity 800 ml (27.1 oz)
c
Important:
Do not refill the ink.
Pre-treatment liquid specifications
Expiry date See the date printed on the
package (at normal temperature)
SC-F2200 Series General Information
Specifications Table
16

Pre-treatment liquid specifications
Temperature Cotton pre-treatment liquid
Operating: 10 to 35 ˚C (50 to 95 ˚F)
In storage (in package):
-20 to 40 ˚C (-4 to 104 ˚F)
(within 4 days at -20 ˚C (-4 ˚F), a
month at 40 ˚C (104 ˚F))
Transporting (in package):
-20 to 60 ˚C (-4 to 140 ˚F) (within 4
days at -20 ˚C (-4 ˚F), a month at 40
˚C (104 ˚F), 72 hours at 60 ˚C (140
˚F))
Polyester pre-treatment liquid
Operating: 10 to 35 ˚C (50 to 95 ˚F)
In storage (in package):
0 to 40 ˚C (32 to 104 ˚F) (within 4
days at 0 ˚C (32 ˚F), a month at 40
˚C (104 ˚F))
Transporting (in package):
-20 to 60 ˚C (-4 to 140 ˚F) (within 4
days at -20 ˚C (-4 ˚F), a month at 40
˚C (104 ˚F), 72 hours at 60 ˚C (140
˚F))
Capacity Cotton pre-treatment liquid
20 L (5.29 gallons)
Polyester pre-treatment liquid
18 L (4.75 gallons)
Dimensions (W) 300 x (D) 300 x (H) 300 mm
([W] 11.8 x [D] 11.8 x [H] 11.8 in.)
Ink cleaner specifications
Expiry date See the date printed on the
package (at normal temperature)
Temperature Operating: 10 to 35 ˚C (50 to 95 ˚F)
In storage (in package):
-20 to 40 ˚C (-4 to 104 ˚F)
(within 4 days at -20 ˚C (-4 ˚F), a
month at 40 ˚C (104 ˚F))
Transporting (in package):
-20 to 60 ˚C (-4 to 140 ˚F) (within 4
days at -20 ˚C (-4 ˚F), a month at 40
˚C (104 ˚F), 72 hours at 60 ˚C (140
˚F))
Capacity 150 ml (5.072 ounces)
SC-F2200 Series General Information
Specifications Table
17