Ergotron Zido Handle User manual

1 of 2
300-5405-00 rev. B • 06/16
Built with Anthro-DNA™
Zido™Handle
Product Part#
Zido Handle ZHzz
User's Guide
For the latest User Installation Guide please visit: www.ergotron.com
NOTE: The Zido cart is not included.

2 of 2
300-5405-00 rev. B • 06/16
01
02
Product Quantity Part Number
01 Handle 1 250-1049-00
02 1" Cap Screw 4 325-5456-00
© 2016 Ergotron, Inc. All rights reserved.
All trademarks are the property of their respective companies. Anthro is a registered trademark and brand of Ergotron Inc.
Anthro-DNA is a trademark of Ergotron Inc.
STEP 1
Align the Handle
Align the handle with the open holes on
bracket on the bottom of the Zido shelf. Make
sure that the handle curves up.
PARTS LIST
Before beginning assembly of your Zido Handle,
please review the parts list to verify that your
shipment is complete.
A 1/8" Hex Key is provided for this assembly.
STEP 2
Install the handle
Using the 1/8” hex key provided, attach the handle to
the base unit with four 1" Cap Screws.
Congratulations! Your assembly is complete!
For local customer care phone numbers visit: http://contact.ergotron.com
For Service visit: www.ergotron.com
For Warranty visit: www.ergotron.com/warranty