ETC Desire D60 XTI User manual

Copyright © 2015 Electronic Theatre Controls, Inc.
All rights reserved. Product information and specifications subject to change.
Part Number: 7410M1250-1.8.0
Released: October 2015
This product is intended for professional use only.
Read this entire document before using this product.
D40/D60 XTI
User Manual
v1.8
Rev A
Desire®Series by ETC

ETC permits the reproduction of materials in this manual only for non-commercial
purposes. All other rights are reserved by ETC.
ETC intends this document, whether printed or electronic, to be provided in its
entirety.
ETC®, Selador®, and Desire® are registered trademarks of Electronic Theatre Controls,
Inc. in the United States and other countries.
Other product and company names mentioned herein may be trademarks and/or service
marks of their respective owners.
This product is protected by one or more of the following U.S. Patents: 6,016,038,
6,150,774, 6,788,011, 6,806,659, 6,683,423 and 7,023,543

Table of Contents i
Table of Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick Setups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Vivid, Lustr+, Fire, Ice and Studio HD . . . . . . . . . . . . . . . . . . . .1
Studio Daylight, Studio Tungsten . . . . . . . . . . . . . . . . . . . . . . .2
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Typography Used in This Guide. . . . . . . . . . . . . . . . . . . . . . . . .4
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Chapter 1 Installation and DMX Profiles. . . . . . . . . . .6
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Dimensions and Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Fixture Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Installation Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Typical Power Consumption D40XTI . . . . . . . . . . . . . . . . . . . .10
Typical Power Consumption D60XTI . . . . . . . . . . . . . . . . . . . .11
Note About LED Fixtures . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Color Rendering Index and Color Quality Scale Ratings . . . .12
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Installation on a Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Accessory Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Installation on a Permanent Base . . . . . . . . . . . . . . . . . . . . . .15
Installation on a Pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Installation on a Wall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Power and Data Cabling Requirements . . . . . . . . . . . . . . . . .16
Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
DMX Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Channel Mapping and DMX Input Profiles . . . . . . . . . . . . . . . . . .22
Vivid, Lustr+, Fire, Ice, Studio HD . . . . . . . . . . . . . . . . . . . . . .22
Studio Tungsten and Daylight. . . . . . . . . . . . . . . . . . . . . . . . .22
Vivid, Lustr+, Fire, Ice, Studio HD . . . . . . . . . . . . . . . . . . . . . .23
Studio Tungsten and Daylight. . . . . . . . . . . . . . . . . . . . . . . . .24

ii Desire D40/D60 XTI v1.8.0 User Manual
Chapter 2 Operation. . . . . . . . . . . . . . . . . . . . . . . . . . 25
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Gadget . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
DMX/RDM Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
DMX Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Data Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Plus 7 (Vivid, Lustr+, Fire, Ice, and Studio HD) . . . . . . . . . . . .29
LED Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Over Temp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Restore Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Software Update Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Presets and Sequences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Sequences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Appendix A Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . 37
Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Quick Setups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Appendix B RDM Commands . . . . . . . . . . . . . . . . . . . . 40

Introduction 1
Introduction
Congratulations on your purchase of a Desire Series D40/D60 XTI fixture by ETC.
The Desire XTI Series is designed for permanent installations indoors or outdoors, with an IP66 rating,
rugged die-cast enclosure, and noiseless fan-free operation. Up to 32 Desire XTI fixtures can be linked
together on one data chain and configured over a DMX/RDM network.
Desire’s x7 Color System™ seven-hue technology produces a light and color quality that conventional
LED systems cannot duplicate. This unique color system produces bright, broad-spectrum whites and
intense colors equally well, rendering pigments, objects, and skin tones in a natural way.
Fire and Ice fixtures use elements of the x7 Color System for superior performance in deep saturated
colors.
Studio Daylight and Studio Tungsten fixtures use high-output white LEDs for maximum brightness and
efficacy. Studio Tungsten interacts very well with incandescent sources, while Studio Daylight easily
replaces a variety of HMI lamps and natural sunlight.
Quick Setups
You can use any one of the Quick Setups and fine-tune settings for operation via
DMX/RDM protocol.
Vivid, Lustr+, Fire, Ice and Studio HD
Some of the options include:
• Multiple DMX profiles ranging from a simple 3-channel RGB profile to 8-channel native
color and intensity control.
• Multiple dimming curve options.
• Preset colors and sequences for standalone operation.
• White point selection; white light and color behavior based on a specific color temperature
white light such as 3200K or 5600K.
• Loss-of-data behavior options.
• Power regulation modes; three output options that offer a choice between maximum light
output for lower duty cycles and maximum thermal stability and output consistency for
higher duty cycles.

2Desire D40/D60 XTI v1.8.0 User Manual
Studio Daylight, Studio Tungsten
Some of the options include:
• Multiple dimming curve options.
• Presets and sequences for standalone operation.
•Strobe.
• Loss-of-data behavior options.
• Power regulation modes; three output options that offer a choice between maximum light
output for lower duty cycles and maximum thermal stability and output consistency for
higher duty cycles.
Figure-1.1 Components of a D40/D60 XTI Fixture.
Figure-1.2 Components of the Rear Panel.
LED array
Yoke
Trim ring
Yoke
locking
bolt
Safety
cable
loop
Power in
DMX/RDM in
and thru
Status indicators

Introduction 3
Models
Each member of the Desire Series product line is unique and optimized for a specific lighting task. All
fixtures feature narrow optics for the longest throws.
Vivid
• Full 7-color x7 LED array
• Optimized for high-output deep pastels and strong saturated colors—an all-around
workhorse for vibrant color washes
Lustr+
• Specialized x7 LED array with 6 colors plus white
• Broad-spectrum color optimized for the best white and light tints across the entire white
and pastel range
• Beautifully illuminates skin tones and other objects—ideal for theatrical lighting
Fire (discontinued)
• Optimized for saturated colors at the red end of the spectrum
• Strongest output for high-intensity washes and theatrical environments
Ice (discontinued)
• Optimized for saturated colors at the blue end of the spectrum
• Strongest output for high-intensity washes and theatrical environments
Studio HD
• Precise mix of warm white and cool white LEDs plus additional strategic colors for more
spectral power
• Continuously variable color temperature white light
• Extreme CRI and high-definition illumination of skin tones from 2700K to 6500K
Studio Daylight
• 5,700K nominal correlated color temperature
•70CRItypical
Studio Tungsten
• 3,000K nominal correlated color temperature
•85CRItypical
Applications
•Houses of worship •Outdoor signage
•Museums •Outdoor performance venues
•Theme parks •Public sculptures
•Commercial buildings

4Desire D40/D60 XTI v1.8.0 User Manual
Compliance
The Desire D40/D60XTI Series fixture complies with and has been tested to the following regulatory
standards:
• ETL Listed to UL 1598 USA / CSA C22.2 No. 250.0-08 Canada
• CE EN55015:2006 + A1:2007 / EN55022:2006 + A1:2007 Class B / EN61000-3-2:2006 +
A2:2009 / EN61000-3-3:2008 / EN61547:1996 + A1:2000
Document Conventions
Notices
Throughout this manual, the following are used to alert you to notes and safety notices.
Typography Used in This Guide
Menu items and commands you must perform are indicated in bold text. For example:
Using an RDM configuration tool, select Off to turn the Status Indicators off.
Safety
The Desire series fixtures are intended for professional use only. Read entire User Manual before
using equipment.
Note:
Notes are helpful hints and information that is supplemental to the main text.
CAUTION:
A Caution statement indicates situations where there may be undefined or unwanted
consequences of an action, potential for data loss or an equipment problem.
WARNING: Warning statement indicates situations where damage may occur, people
may be harmed, or there are serious or dangerous consequences of an
action.
WARNING: RISK OF ELECTRIC SHOCK! This warning statement indicates situations where
there is a risk of electric shock.

Introduction 5
Contacts
If you have questions about your Desire series fixture that are not answered in this manual, please
contact the supplier of your ETC equipment or ETC Technical Services. For general information, your
most convenient resources are the references provided in this manual. To search more widely try the
ETC web site at www.etcconnect.com.
For technical questions about Desire Series fixtures, contact ETC Technical Services directly at one of
the offices listed below. Emergency service is available from all ETC offices outside of normal business
hours.
Please email comments about this manual to: TechCo[email protected]
WARNING: Note the following safety warnings before use:
•Do not mount the Desire XTI fixture on or near a flammable surface.
•Mount and support the fixture only by the primary suspension holes in the yoke or
mounting brackets.
•Mount the fixture from a suitable structure using only the hardware rated for the weight
of the fixture.
•In addition to primary suspension, attach a safety cable (ETC Model 400SC or other
approved safety cable or device) to the fixture housing. Appropriate attachment point
(hole) is provided in the protruding tab on the fixture housing.
•Disconnect the unit from power before all cleaning and maintenance.
•Maximum recommended ambient operating temperature: Ta=40°C (104°F)
•Maximum anticipated external surface temperature: Tmax=80°C (158°F)
•External temperature after 5 minutes of full-brightness operation and 23°C (74°F)
ambient: 38°C (100°F)
•External Temperature (steady state achieved) at 23°C (74°F): 70°C (158°F)
Americas United Kingdom
Electronic Theatre Controls Inc. Electronic Theatre Controls Ltd.
Technical Services Department Technical Services Department
3031 Pleasant View Road 26-28 Victoria Industrial Estate
Middleton, WI 53562 Victoria Road,
800-775-4382 (USA, toll-free) London W3 6UU England
[phone] [phone]
[email protected] [email protected]
Asia Germany
Electronic Theatre Controls Asia, Ltd. Electronic Theatre Controls GmbH
Technical Services Department Technical Services Department
Room 1801, 18/F Ohmstrasse 3
Tower 1, Phase 1 Enterprise Square 83607 Holzkirchen, Germany
9 Sheung Yuet Road [phone]
Kowloon Bay, Kowloon, Hong Kong [email protected]
[phone]
[email protected]

6Desire D40/D60 XTI v1.8.0 User Manual
Chapter 1
Installation and DMX Profiles
This chapter contains the following sections:
•Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
•Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
•Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
•DMX Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
•Channel Mapping and DMX Input Profiles . . . . . . . . . . . . . . . . . . . 22

Installation and DMX Profiles 7
Specifications
Physical
• Rugged die-cast aluminum construction • Stainless steel mounting yoke
• Advanced thermal management systems for long LED
life
• Available in black (standard), white (optional), silver, or
custom colors (contact factory)
• Easy-to-remove trim ring for accessories • Rated IP66 for exterior use
• Ambient operating temperature
-20 to 40 °C (-4 to 104 °F)
• No-noise, fan-free convection cooling for acoustically
sensitive installations
• Continuous operation at 40 °C (104 °F) • See Fixture Weight on page 8
Electrical
• 100V to 240V 50/60 Hz universal power input • Up to 32 fixtures may be linked on one data chain
• Requires power from non-dim source •
LEDs
• 40 or 60 Luxeon® Rebel™ LED emitters (Vivid, Lustr+,
Fire, Ice, and Studio HD)
• 40 or 60 Luxeon® Rebel™ ES LED emitters (Studio
Daylight and Studio Tungsten)
• 50,000 hr. LED life (50,000 hours to 70% intensity) • See Note About LED Fixtures on page 12
Optical
• Tight primary field angle of 17°
(Vivid, Lustr+, Fire, Ice, and Studio HD)
• Secondary lenses available for multiple beam spread
options including round, oblong, and linear patterns
• Tight primary field angle of 24°
(Studio Daylight and Studio Tungsten)
• Combine linear lenses for desired beam spread
Color
• Specialized capabilities from different LED array options
based on x7 color-mixing expertise:
– Vivid – Optimized for strong, saturated colors at
maximum brightness
– Lustr+ – x7 Color System array with a high-intensity
white LED for an ideal theatrical wash light
Full range color, with an emphasis on lighter colors
and white
– Fire and Ice (discontinued) – Optimized for high-
intensity saturated colors in either the warm, red end
of the spectrum (Fire) or the cool, blue end of the
spectrum (Ice)
– Studio HD — Optimized for variable color
temperature white light
• Interacts seamlessly with conventional sources
• Achieves excellent 3200° or any other Correlated Color
Temperature white light from 2000 to 10,000°K (except
Fire or Ice) (CCT adjustment not available on Studio
Daylight and Studio Tungsten)
• Beautifully illuminates skin tones and other objects
• Deeply saturated colors across an exceptionally wide
gamut
Control
• DMX512-A compliant • Optional strobe channel
• DMX in via 6 foot cord and supplied DMX termination
board
• Master/slave mode
• RDM functionality for address and setting changes and
playing presets
• 15-bit virtual dimming engine for smooth, high-quality
theatrical fades
• Console-free presets and sequences via RDM device • See DMX Profile on page 18
• Multiple profile options for different levels of control

8Desire D40/D60 XTI v1.8.0 User Manual
Dimensions and Clearances
Use the following dimensions to allow proper clearances around the fixture. Allow additional space for
cables.
Figure-1.1 D40/D60 XTI Dimensions.
Fixture Weight
Total weight depends on how the individual fixture is configured.
Model Weighta
a) Does not include mounting hardware.
Shipping Weight
Lbs.Kg.Lbs.Kg.
D40XTI 15 6.8 18 8.2
D60XTI 23 10.43 24.7 11.2
7.1"
180mm
5.6"
141mm
14.7"
373mm
11.6"
294mm
19.1"
486mm
4.5"
114mm
11.0"
278mm
4.1"
105mm
8.3"
211mm
13.3"
338mm
17.7"
450mm
9.2"
234mm
8.5"
216mm
20.5"
521mm
16.1"
408mm
12.8"
325mm
114mm
4.5"
12.0"
305mm
7.3"
186mm
4.8"
9.7"
246mm
123mm
14.2"
18.6"
361mm
474mm
10.6"
9.9"
270mm
251mm
D40XTI
D60XTI

Installation and DMX Profiles 9
Installation Clearances
Cooling and Duty Cycle
The D40/D60 XTI fixture is convection cooled and can operate all channels at full power continuously
in ambient temperatures up to 40°C (104°F).
If ambient conditions exceed 40°C (104°F) or fail to allow sufficient airflow, over a long period of time,
the fixture may shut down and remain off until they return to a safe operating temperature. The fixture
provides two methods to indicate over temperature:
• Visible: The LED array glows in a dull, low intensity with only some emitters illuminated
and the Error Indicator light turns on.
• Dark: The LED array turns off.
LED life is adversely affected by high-temperature operation. When operating under elevated ambient
temperatures, avoid turning all channels to 100% for extended periods, such as channel checks or
focusing.
CAUTION:
Duty Cycle
Operating the fixture in higher ambient temperatures or low-airflow situations may
cause the power supply to shut down. Following a cool-down period, the power
supply will automatically reset and the fixture will return to operation.
It is good practice to power down any device with on-board electronics to limit
unnecessary wear on the devices and eliminate residual use of electricity. When not
in use, Desire fixtures should be powered down by disconnecting from power at the
breaker.

10 Desire D40/D60 XTI v1.8.0 User Manual
Typical Power Consumption D40XTI
Vivid
Lustr+
Fire
Ice
Studio HD
Studio Daylight
Studio Tungsten
100V 120V 240V
Idle Power / Current 10.5W / 0.135A 11W / 0.098A 12.7W / 0.078A
100% Boost Power / Current 102W / 1.12A 98W / 0.82A 95.6W / 0.403
100V 120V 240V
Idle Power / Current 10.3W / 0.125A 10.5W / 0.094A 12.2W / 0.074A
100% Boost Power / Current 104W / 1.16A 102W / 0.861 99.7 W / 0.418
100V 120V 240V
Idle Power / Current 10.5W / 0.125A 10.8W / 0.096A 12.5W / 0.076A
100% Boost Power / Current 91.2W / 1.02A 88.2W / 0.74A 87.2W / 0.369A
100V 120V 240V
Idle Power / Current 11.0W / 0.123A 11.2W / 0.099A 12.8W / 0.077A
100% Boost Power / Current 104.2W / 1.17A 102.2W / 0.867A 99.5W / 0.42A
100V 120V 240V
Idle Power / Current 11.1W / 0.134A 11W / 0.097 A 12.8W / 0.077A
100% Boost Power / Current 106.2W / 1.19A 103.5W / 0.883A 101.3W / 0.426A
100V 120V 240V
Idle Power / Current 10.6W / 0.123A 10.6W / 0.095A 12.4W / 0.076A
100% Boost Power / Current 105.1W / 1.12A 103.3W / 0.878A 100.8W / 0.424A
100V 120V 240V
Idle Power / Current 10W / 0.111A 10.1W / 0.093A 11.9W / 0.075A
100% Boost Power / Current 104W / 1.05A 103.1W / 0.872A 100.3W / 0.422A

Installation and DMX Profiles 11
Typical Power Consumption D60XTI
Vivid
Lustr+
Fire
Ice
Studio HD
Studio Daylight
Studio Tungsten
100V 120V 240V
Idle Power / Current 4.2W / 0.08A 4.3W / 0.075A 4.1W / 0.067A
100% Boost Power / Current 117.9W / 1.19A 118W / 1A 115.6W / 0.526
100V 120V 240V
Idle Power / Current 4.2W / 0.08A 4.2W / 0.075A 4.3W / 0.069A
100% Boost Power / Current 123.7W / 1.24A 123.6W / 1.04 121W / 0.546
100V 120V 240V
Idle Power / Current 4.2W / 0.08A 4.3W / 0.075A 4.2W / 0.067A
100% Boost Power / Current 108.8W /1.1A 108.4W / 0.92A 106.2W/ 0.491A
100V 120V 240V
Idle Power / Current 4.2W / 0.08A 4.2W /0.075A 4.3W / 0.068A
100% Boost Power / Current 129.W / 1.26A 124.4W / 1.05A 121.8W / 0.55A
100V 120V 240V
Idle Power / Current 4.2W / 0.08A 4.3W / 0.76 A 4.3W / 0.068A
100% Boost Power / Current 125.1W / 1.26A 124.7W / 1.05A 122.5W / 0.552A
100V 120V 240V
Idle Power / Current 4.2W / 0.08A 4.3W / 0.76 A 4.2W / 0.068A
100% Boost Power / Current 125.1W / 1.26A 124.7W / 1.05A 122.5W / 0.552A
100V 120V 240V
Idle Power / Current 4.3W / 0.08A 4.2W / 0.073A 4.2W / 0.065A
100% Boost Power / Current 124.4W / 1.25A 123.7W / 1.04A 121.2W / 0.545A

12 Desire D40/D60 XTI v1.8.0 User Manual
Note About LED Fixtures
All LED sources experience some lessening of light output and some color shift over time. Desire Series
fixtures have complex thermal management systems to minimize these changes. With typical usage, a
Desire fixture will still achieve at least 70% of its initial output after 50,000 hours of use (B50, L70). In
individual situations, LEDs will be used for different durations and different levels. This can eventually
lead to minor alterations in color performance, necessitating slight adjustment to presets, cues, or
programs.
All LEDs may exhibit a slight shift in output as they rise to full operating temperature. Desire Series
fixtures allow the selection of different power settings in order to balance the competing requirements
of thermal stability and brightness. Depending on the selected setting, changes in output as fixtures
warm up may or may not be visible to the eye.
Color Rendering Index and Color Quality Scale Ratings
Desire fixtures are evaluated for Color Rendering Index (CRI) and Color Quality Scale (CQS)
performance using measured output spectrum and optimized mix solutions for a best spectral match
to black body sources at 3200K and 5600K. Color fidelity was also measured. These numbers may
fluctuate slightly from fixture to fixture. This is a normal characteristic of white LEDs, and this kind of
variation is highly unlikely to be apparent in most applications. The performance is the same for all
fixture versions.
Desire luminaires provide excellent color rendering, particularly the color-mixing versions. A Duv rating
of 0.000 indicates that the color mix used was exactly on the black body line, with no green or
magenta tint.
Studio Daylight and Studio Tungsten fixtures use only white-type LEDs at a fixed color temperature in
order to maximize output and efficacy.
Fixture CRI CQS Color Fidelity Duv
Vivid at 3200K 87 89 89 0.000
Vivid at 5600K 90 92 92 0.000
Lustr+ at 3200K 86 88 88 0.000
Lustr+ at 5600K 93 92 90 0.000
Studio HD at 3200K 89 90 91 0.000
Studio HD at 5600K 92 94 94 0.000
Studio Tungsten at 3000K 86 86 86 0.001
Studio Daylight at 5600K 71 70 69 0.001

Installation and DMX Profiles 13
Installation
The D40/D60 XTI fixtures can be mounted four ways.
• On a pipe with a C-clamp
• On a permanent base
•Onapole
•Onawall
Install on pipe or a suitable, rigid, permanent base with secured bolts. This can include poured concrete
pads, factory-supplied pole-top and wall-mount brackets, and other attachments which meet the
published weight and wind-load requirements for the fixture.
Detailed installation information is packaged with the fixture. Refer to D40/D60 XTI Installation
Instructions.
Installation on a Pipe
The D40/D60 XTI fixtures can be hung from a pipe using a C-clamp. The C-clamp attaches the fixture
to the mounting pipe and allows you to adjust the position of the fixture once it is mounted.
Step 1: Tightly fasten the C-clamp to the yoke with the provided yoke bolt and lock washer.
Step 2: Place the C-clamp on mounting pipe, then tighten the pipe bolt to secure it.
Step 3: Loosen the C-clamp pan screw and rotate the yoke to the desired position.
Step 4: Tighten the pan screw to lock the fixture.
Model Weighta
a) Does not include mounting hardware.
Shipping Weight Wind
Rating
Lbs.Kg.Lbs.Kg.
D40XTI 15 6.8 18 8.2 .72 EPA
D60XTI 23 10.43 24.7 11.2 .95 EPA
Note:
The EPA number is obtained by estimating Cd(Wind Drag Coefficient) and
multiplying it with the projected area of the object. Wind Drag Coefficients were
obtained from AASHTO Sixth Edition 2013.
WARNING: Do not use this fixture with a damaged power lead. If the power lead (cord
set) is damaged, it must be replaced. Failure to follow this warning can result
in serious injury or death.
WARNING: All third-party mounting hardware should be corrosion-resistant and
designed for use where installed.
CAUTION:
Tighten the C-clamp pipe bolt to 15-20 ft./lbs. (approximately finger tight plus up to
one-quarter turn). Do not exceed 25 ft./lbs. Do not use excessive force.
Tighten the yoke pivot bolt to 5-10 ft./lbs. (approximately finger tight plus up to one-
eighth turn). Do not exceed 15 ft./lbs. Do not use excessive force.

14 Desire D40/D60 XTI v1.8.0 User Manual
Safety Cable
The safety cable (or other approved safety device) should be attached to the fixture housing and
wrapped around the hanging structure (pipe). An appropriate attachment loop is provided on the
protruding tab of the fixture housing. Take care to leave as little slack as possible in the safety cable to
avoid the cable catching the yoke of the fixture.
Focus Adjustment
The fixture can be tilted up and down to focus the light where it is needed. Upon powering the fixture,
all colors are automatically on so you can focus the fixture. This preset remains active until it is changed
with an RDM configuration tool or DMX/RDM lighting control device.
Adjusting the Tilt
Step 1: Loosen the yoke locking bolt.
Step 2: With the fixture turned on, tilt it to the desired angle.
Step 3: Tighten the yoke locking bolt.
Adjusting the Pan
The pan is adjusted at the hanging clamp or the mounting base. Consult the clamp manufacturer’s
documentation for instructions on loosening and rotating the yoke at the clamp or refer to the
appropriate installation instructions.
WARNING: The safety cable (or other approved safety device) must be securely attached
to the safety cable loop before loosening the clamp.
Safety
cable loop

Installation and DMX Profiles 15
Accessory Installation
Accessories, such as grid louver, half shield, and lenses, are installed on the front of the fixture without
compromising the integrity of the water-tight seal. Secondary lenses are secured with the trim ring and
can be rotated while they are on the fixture, allowing you to focus the beam precisely.
For detailed information, refer to the following accessory installation instructions that are packaged
with the accessory.
• D40/D60 XTI Grid Louver Installation Instructions
• D40/D60 XTI Half Shield Installation Instructions
• D40/D60 XTI Secondary Lens Installation Instructions
Figure-1.2 Trim Ring and secondary lens installation.
Installation on a Permanent Base
Install on a suitable, rigid, permanent base with secured bolts. This can include poured concrete pads
on the ground or a solid structure such as on top of a concrete wall. For mounting, use the full-sized
template that is included in the installation instructions or download the template at
www.etcconnect.com.
Refer to the D40/D60 XTI Installation Instructions.
Installation on a Pole
A Single fixture or Twin fixture pole mount is used to attach the D40/D60 XTI fixture to a pole. The
Single fixture pole mount fits nominal 2-3/8 inch poles and the twin pole mount fits nominal 4 inch
poles. Both mounts can be rotated for focusing. The twin mount allows you to attach two fixtures side-
by-side on one pole.
Refer to the D40/D60 XTI Pole Mounts Installation Instructions.
WARNING: Make sure all accessories are securely in position before installing the
fixture.
Trim Ring

16 Desire D40/D60 XTI v1.8.0 User Manual
Installation on a Wall
The Wall Mount Bracket accessory for the D40/D60 XTI fixture provides a stable mounting position for
the fixture, while providing a wire way for a clean and functional installation to walls and other vertical
surfaces.
Refer to the D40/D60 XTI Wall Mount Installation Instructions.
Power and Data Cabling Requirements
Power
The D40/D60 XTI fixture operates on AC power, 100 to 240VAC/50-60Hz. The fixture must be
connected to a non-dimmable power source in order to avoid damage to its internal power supply and
other electrical components. Dimming will damage the fixture and void the warranty.
The fixture is completely pre-wired at the factory and there is no need for entry into the housing.
Refer to D40/D60 XTI Installation Instructions for detailed information about installation.
Data
The D40/D60 XTI fixture operates on a DMX control signal or as a standalone fixture. The fixture is
supplied with cable that includes DMX input and thru. DMX cables should be acceptable for DMX data
transmission (not microphone cable) and should follow the standard pinout. The optional secondary
data pair is not used by the D40/D60 XTI fixtures. The maximum DMX data run from any DMX source
to the last fixture in a chain is 1000 feet (300m).
Use Belden®9729, CAT-5e, or equivalent Shielded Twisted Pair (STP) or Unshielded Twisted Pair (UTP)
cable to connect the D40/D60 XTI into an IDC (Insulation Displacement Connector) style connector.
Europe North America Mains
Brown Black Live
Blue White Neutral
Yellow/green Green Ground
CAUTION:
The fixture must be grounded and wired in accordance with national, state and local
electrical codes. Failure to do so may result in serious personal injury.