ETEKCITY ESF28 Series User manual

1
Smart Fitness Scale
Model: ESF28 Series
User Manual
Questions or Concerns?
Mon–Fri, 9:00 am–5:00 pm PST/PDT
[e-mail] • [phone]

2
Table of Contents
Package Contents
Specications
Safety Information
Function Diagram
Display Diagram
Before First Use
VeSync App Setup
Using the Smart Scale
Maintenance
Common Display Codes
Troubleshooting
FCC Statement
Limited One-Year Warranty
Customer Support
3
3
4
6
7
8
9
12
14
16
17
20
21
23

3
1 x Smart Fitness Scale
3 x 1.5V AAA Batteries (Pre-Installed)
1 x Quick Start Guide
Specifications
Package Contents
Weight Capacity 400 lb / 180 kg / 28 st
Increments 0.2 lb / 0.05 kg
Weight Units lb / kg / st
Platform Tempered glass
Battery 3 x 1.5V AAA batteries
Auto-Off 30 seconds
Dimensions 11.8 x 11.8 x 1 in / 30 x 30 x 2.5 cm
Operating System iOS®9.0+ or Android™ 5.0+

4
Safety Information
• This scale should not be used to diagnose or treat any medical
condition.
• Scale data should not be used as a substitute for medical advice
from a healthcare professional.
• This scale uses a harmless electrical current to measure body fat.
Consult a healthcare professional before using the smart scale if
you use medical electronic equipment such as a pacemaker.
• Check the scale before using. Do not use the scale if it is damaged
in any way.
• Do not strike or hit the scale. Do not use the scale if the glass
is cracked or broken. Due to the nature of tempered glass, the
glass will shatter if there is even a slight crack. If you see a crack,
contact Customer Support immediately (page 23).
Please read and follow all instructions and safety
guidelines in this manual.
READ AND SAVE THESE INSTRUCTIONS
Medical
General Use

5
• Do not mix new and old batteries.
• If the scale is not in use for a long period of time, remove the
batteries to extend the lifetime of the scale.
Batteries
• The glass platform is slippery when wet. Always make sure
the platform and your feet are dry before stepping on for
measurement.
• Place the scale on a hard, at surface to avoid tipping.
• To weigh safely and accurately, stand with your feet shoulder-
width apart while on the scale. Do not stand on the edge of the
scale or jump on the scale.
• Avoid standing on the scale for a long period of time, or when you
are not weighing yourself.
• Do not overload the scale. Maximum weight capacity is 400 lb /
180 kg / 28 st.
• Keep the scale in a cool area with low humidity. Keep the scale
away from heat sources, such as ovens or heaters. Avoid
temperature uctuations. Store the scale in a horizontal position,
not vertical.
• Handle with care. Not for commercial use. Household use only.

6
Function Diagram
A. Weighing Platform
B. Display
C. Anti-Skid Padding
D. Battery Compartment
BA
D
C

7
Display Diagram
A. Weight Measurement
B. Bluetooth®Icon
C. Weight Units
A
B
C

8
Before First Use
1. Open the battery compartment on the underside of the
scale. Remove the included AAA batteries.
2. Remove the plastic insulator strip from the battery
compartment.
3. Replace the batteries. Follow the guidelines in the battery
compartment to match the +and –terminals.
Slide
1.5v - AAA
1.5v - AAA
1.5v - AAA
1.5V - AAA
1.5V - AAA
1.5V - AAA
Slide

9
VeSync App Setup
1. To download the VeSync app, scan the QR code or
search “VeSync” in the Apple App Store®or Google Play
Store.
Note: Due to app updates and improvements, the VeSync app may be slightly
different than shown in the manual. In case of any differences, follow the in-
app instructions.
Note:
• This scale uses the VeSync app, not the VeSyncFit app.
• For Android users, you may need to select “Allow” to use VeSync.

10
2. Open the VeSync app. If you already have an account, tap
Log In. To create a new account, tap Sign Up.
Note: You must create your own VeSync account to use third-party
services and products. These will not work with a guest account. With a
VeSync account, you can also allow your family and friends to use your
smart tness scale.
Note: You can change the name and icon at any time in the smart tness
scale settings.
3. Make sure the scale is fully charged.
4. Make sure your phone has Bluetooth®turned on.
5. Tap + in the VeSync app and select your smart tness
scale.
6. Follow the in-app instructions to connect to your smart
tness scale.