Etrel INCH User manual

ELECTRIC VEHICLE CHARGING
STATION
ETREL INCH
COMMUNICATION WITH
ALGODUE METER
Document version: 1.0
Document date: 20. 10. 2020

1 | 17
Etrel INCH | Communication with Algodue Meter
Technical
|
TABLE OF CONTENTS
1PREFACE .....................................................................................2
About this Document.........................................................................2
More Information about Etrel INCH ..............................................2
More Information about Algodue Meter.......................................2
2GENERAL DESCRIPTION ...............................................................3
Benefits of Using Algodue Meter with Rogowski Coils......................4
Prerequisites for Use .........................................................................4
3ALGODUE UPM209 METER INSTALLATION...................................5
Safety Measures ................................................................................5
Environmental Requirements............................................................6
Mounting ...........................................................................................6
Electrical Connections........................................................................6
Current and Voltage Inputs............................................................6
Three-Phase Connection................................................................7
Power Supply .................................................................................8
Ethernet Communication Port.......................................................8
4ALGODUE METER CONFIGURATION...........................................10
Reset the Values to the Default State..............................................10
5ACCESSING THE CHARGING STATION'S WEB INTERFACE.............11
6CHARGING STATION CONFIGURATION.......................................13
Sign In...............................................................................................13
Ethernet Connectivity......................................................................14
Power Management ........................................................................14
General Configuration .................................................................15
Building Power Limits...................................................................16
7CONTACT INFORMATION ..........................................................17

2 | 17
Etrel INCH | Communication with Algodue Meter
Technical
|
1 PREFACE
ABOUT THIS DOCUMENT
This document is explaining specifics of connecting the Algodue meter to
Etrel INCH charging station. It is presumed, that the charging station is
already installed and configured.
MORE INFORMATION ABOUT ETREL INCH
For more information about Etrel INCH, see the following documents:
•Etrel_INCH_User_Manual.pdf
•Etrel_INCH_Physical_Installation.pdf
•Etrel_INCH_Electrical_Installation_Specifics.pdf
•Etrel_INCH_Configuration_Guide.pdf
•Etrel_INCH_Communication.pdf
All the documents are accessible from product page on www.etrel.com
Figure 1: Etrel INCH charging station
MORE INFORMATION ABOUT ALGODUE METER
For more information about Algodue meter UPM209 with Rogowski coils,
check the following documents:
•UPM209RGW_ds_ENG.pdf
•UPM209_user-manual-v004-eng.pdf
•MFC150_eng.pdf

3 | 17
Etrel INCH | Communication with Algodue Meter
Technical
|
2 GENERAL DESCRIPTION
The Algodue meter is a digital meter able to measure the electrical
parameters on three-phase systems. It provides accurate measurements
even by distorted waveform.
Figure 2: Algodue meter with Rogowski coils
LCD display provides the three-phase quantities. The working parameters
can be easily set up by instrument keypad.
The instrument is a compact, cost effective meter operating both as a
stand-alone device or as an integral part of a more extensive energy
monitoring and management network.
Figure 3: Algodue meter Ethernet port location

4 | 17
Etrel INCH | Communication with Algodue Meter
Technical
|
BENEFITS OF USING ALGODUE METER WITH
ROGOWSKI COILS
•Optimised energy consumption of existing infrastructure.
•Reduced charging and operational costs.
•Local consumption of renewable energy sources.
•Future-proof and grid-friendly charging infrastructure.
PREREQUISITES FOR USE
•Algodue meter connected to the mains and LAN.
•Rogowski coils properly installed.
•A computer connected to the same LAN as the Algodue meter.
•INCH charging station (set up as a master) connected to the same
LAN as Algodue meter.