EUROM PLD2430 User manual

Original instructions
Multi-functional Electric Weed Burner
PLD2430
USER MANUAL
Reduce risks of injury, please read this
instruction manual before using your new
power tools
WARNING: Always switch off the appliance when
non-working.

Original instructions
Fig. B
1
2
5
4
3
6
7
5
8
9
11
12
13
14
10
Fig. C
Optional Accessories

Original instructions
PRODUCT :
1.switch (0/I/II)
2. Hot air nozzle
3. Kick stand
4. Air ventilation
5. Lock button
6. Extension pole
7. Handle grip
8. Weeding nozzle
9. Cable hook
15
17
16

Original instructions
OPTIONAL ACCESSORIES:
10. BBQ / fireplace charcoal lighter nozzle
11. Glass protection nozzle
12. Spoon reflector nozzle
13. Fish tail surface nozzle
14. Cone nozzle

Original instructions
EXPLANATION OF THE SYMBOLS
Denotes risk of personal injury, loss of life or damage to the tool in
case of non-observance of the instructions in this manual.
Indicates electrical shock hazard.
Do not expose to rain.
Remove plug from the mains immediately if the cable is damaged
or cut.
Caution, hot surface.
GENERAL SAFETY INSTRUCTIONS FOR POWER TOOLS
WARNING! Read all instructions
WARNING: Always switch off the appliance when non-working.
WARNING: Always remove the plug from the socket when not
using the device, when replacing the nozzles or during maintenance
of the device
Failure to follow all instructions listed below may result in electric shock, fire
and/or serious injury.
The term “power tool”in all of the warnings listed below refers to your mains
operated (corded) power tool or battery operated (cordless) power tool.
Save these instructions for future reference!
1. Work area
a. Keep work area clean and well lit.
Cluttered and dark areas invite accidents.

Original instructions
b. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gasses or dust.
Power tools create sparks which may ignite the dust of fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs which earthed (grounded) power
tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable
for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
f. Always use tool in conjunction with a residual circuit breaker device.
The use of a residual circuit breaker device reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in serious
personal injury.
b. Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce personal injuries.
c. Avoid accidental starting. Ensure the switch is in the off position

Original instructions
before plugging in.
Carrying power tools with your finger on the switch or plugging in power tools
that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e. Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
The use of these pieces of equipment reduce hazards caused by dust.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your
application.
The correct power tool will do the job better and safer at the rate for which it
was designed.
b. Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous and
must be repaired.
c. Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing power
tools.
Such preventive safety measures reduce the risk of starting the power tool
accidentally.
d. Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool.
Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tools operation. If damaged, have the power tool repaired before
use.

Original instructions
Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
g. Use the power tool, accessories and tool bits etc., in accordance with
these instructions and in the manner intended for the particular type of
power tool, taking into account the working conditions and the work to
be performed.
Use of the power tool for operations different from intended could result in a
hazardous situation.
5. Service
a. Please use a qualified expert who uses original replacement parts to
repair your power tool.
This will ensure proper functioning of the power tool.
ADDITIONAL SAFETY INSTRUCTIONS
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children shall not play with
the appliance.
Cleaning and user maintenance shall not be made by children without
supervision.
When using electric tools, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and personal
injury.
Read all these instructions before attempting to operate this product and save
these instructions.
Before using the appliance
Check the following:
•Make sure the voltage of the appliance corresponds with the power voltage;
–Are the mains lead and the mains plug in a good state: strong, without ravels
or damages.

Original instructions
–Caution is advised when using long extension cables
•Do not use the appliance under moist circumstances;
•The metal mouthpiece gets hot. Watch out and do not touch the metal
mouthpiece;
•Prevent damage of the heating element. Do not lock or block the mouth
piece;
•Do not leave the appliance when switched on;
•When in operation do not point the device at people or animals
•Never look into the hot air nozzle
•Do not use this device in rain or damp surroundings, or near explosive or
flammable products.
•Do not use the device on or near very dry spots to avoid fire
•Always remove the plug from the socket when not using the device, when
replacing the nozzles or during maintenance of the device
•Do not point the device at the same place for longer periods of time
•Do not hold the device too close to the surface about to be worked on as the
device can overheat
•Pay attention to the direct / indirect workspace as the heat can ignite
flammable materials, which are close by but not necessarily in view
•Do not allow the hot parts of the device to touch the cord or other flammable
materials
•The device should always be clean, dry and free of grease and oil
•Do not use the appliance for purposes other than for which it is intended.
This appliance operates at a temperature of 600 degrees without
visible signs of this temperature (no flames), still there is a chance
of fire risk. Watch out for the hot air stream from the mouth piece.
This air stream can cause burns.

Original instructions
When operating the appliance
•If you are going to use the tool, vapours and gas can be released during a
short time. This can be harmful for your health. Asthmatics can suffer
hindrance of it;
•Before connecting the plug to the mains voltage you have to check if the
switch is in position “0”;
•Keep the mains lead always away from the nozzle of the tool;
•Keep children and animals away from the appliance if you are using it.
•Keep all parts of the body away from the metal heating head. Do not touch it
before it is cooled down.
•Carry the appliance by the handle when the metal heating head is cooled
down.
•Hold the appliance by insulated gripping surfaces only, because the metal
heating head may contact hidden wiring or its own cord.
Immediately switch off the appliance when:
•Plug and/or cable are defective or damaged;
•The switch is defective;
•You smell or see smoke caused by scorched insulation from the appliance.
Electrical safety
When using electric machines always observe the safety regulations
applicable in your country to reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and also the enclosed safety