Euroscreen LEONARDO FR14 User manual

RELEASE ER2022_03_17
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
INSTALLATION MANUAL
FRAME SCREEN
LEONARDO FR14
ORIGINAL INSTRUCTIONS IN ITALIAN LANGUAGE
Translation into English language

RELEASE ER2022_03_17
Mod. LEONARDO FR14Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
1.0 GENERAL INFORMATION
1.1 Frame screen description
1.2 Manufacturer’s rights
1.3 Contents and map of this manual
1.4 Warnings
1.5 Warranty - General information
1.6 Screen labels
2.0 FRAME SCREEN DESCRIPTION
2.1 General description
3.0 ASSEMBLY
3.1 Packaging content
3.2 Structural frame assembly
3.3 Projection cloth mounting
3.4 Thin bezel assembly
4.0 INSTALLATION
4.1 Wall mounting
INDEX
In order to guarantee the best performances of your screen, please
READ CAREFULLY this installation manual.

RELEASE ER2022_03_17
Mod. LEONARDO FR14Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
1.1 FRAME SCREEN DESCRIPTION
1.0 GENERAL INFORMATION
This installation manual contains the description of “frame screen” as it is produced
by the manufacturer. This manual contains information about installation, use
and maintenance of the screen.
It also contains the information about the technical features and safe use of the
product.
The installation manual is composed from:
1.0 General information
2.0 Frame screen description
3.0 Assembly
4.0 Installation
1.2 MANUFACTURER’S RIGHTS
Copyrights of this installation manual are exclusively of:
EUROSCREEN SRL
Via Stiria 45/16
33100 Udine - Italy
Tel. [phone]
Fax [phone]
[email protected]
www.screenint.com
1.3 CONTENTS AND MAP OF THIS MANUAL
The frame screen LEONARDO is entirely manufactured in Italy, with high quality
materials and projection cloths that guarantee to your system excellent quality
performances in compliance with CE legislation.
The screen is designed specically for home cinema or professional projections.
The LEONARDO screen is available in different formats and with different
projection surfaces.

RELEASE ER2022_03_17
Mod. LEONARDO FR14Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
Before assembling and installing the frame screen read carefully the installation
manual. Please, store this installation manual so that you can consult it whenever
necessary.
When opening the screen packaging, USE VERY CAREFULLY EVENTUAL
CUTTERS OR SHARP TOOLS that can damage its content. It is recommended
to wear working gloves during the opening of the packaging and the installation
of the product.
According to the weight of the product it has to be handled by two or three or more
people, based on the relation KG/PERSON: MALE 25 kg. - FEMALE 15 kg.
Install the screen in a location with a temperature between 20°C and 24°C.
The manufacturer does not take responsibility for any damage to property or
personal injury if the screen is used outside of recommended specications or in
case of incorrect/poor quality installation.
This projection screen is guaranteed 2 years from the purchase date for
manufacturing defects.
Responsibility is limited to repairing or substitution of the defected components
and without any other charge at our expense.
Warranty is ofcially voided if the screen has been dismantled or it is returned with
collision damage or defective due to incorrect installation. Repairs must be carried
out by an Approved ScreenInt Certied Engineer.
Warranty is ofcially voided if (all the following cases are including but not limited):
1) defects not due to deciencies in the material or workmanship;
2) amendments, alterations, repairs or disassembling of the Product not previously
authorized in writing by Screenint;
3) installation, use or maintenance of the Product not in compliance with Screenint
‘s instructions as set forth in this Installation Manual and/or in any other technical
documentation supplied together with the Product;
4) bad and/or improper and/or not in compliance installation, maintenance,
negligence, improper use;
5) use of non-original spare parts or not authorized in writing by Screenint;
6) normal wear and tear;
7) the screen has been damaged in transit;
8) the sticker regarding the serial number of the product has been altered, deleted,
removed or tampered.
DO NOT install this screen nearby or over heating or air conditioning systems,
because PVC is a plastic material which dilates and remains damaged if it is
subjected to heat and/or cool air.
DO NOT install this screen either facing direct sun light or blocking a window as
PVC could be damaged and make waves for the explanations given above.
The PVC cloth is very sensitive to temperature range. We advise to mount the
screen in environments with an ambient temperature in the range of 20°-25°C.
1.4 WARNINGS
1.5 WARRANTY - GENERAL INFORMATION

RELEASE ER2022_03_17
Mod. LEONARDO FR14
MANUFACTURED BY
EUROSCREEN SRL-ITALY
MADE IN ITALY
SERIAL N.
,
“A”
“B”
“D”
“C”
Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
We advise you to WAIT 3 HOURS for the SCREEN to ACCLIMATISE BEFORE
MOUNTING the screen after delivery, especially if screen arrives from a cold
temperature.
THE SCREEN HAS TO BE STOCKED AND TRANSPORTED ALWAYS IN
HORIZONTAL POSITION, otherwise there could appear waves on the projection
cloth.
DO NOT WASH the projection surface with alcohol or solvent nor with commercial
cleaners. Every now and then dust the surface with a dry and clean duster.
Please, be very careful because any kind of stain on projection surfaces is
inerasable.
When the screen is not completely rolled down (as by factory setting), atness of
the cloth is NOT guaranteed and therefore not covered by warranty.
DO NOT HANG TO THE SCREEN and DO NOT HANG ANY OBJECT to it. Please
take care that children DO NOT PLAY with the screen as they can get severely
injured.
The manufacturer will not accept returns of screens for repair without manufacturer’s
authorization (RMA number) and without a suitable packaging.
This screen is equipped with product identication labels that indicate its essential
technical specications.
1.6 SCREEN LABELS
1.6.2 Label position
Looking at the screen from the
front it. The label is sticked on
the rear side of the frame, on the
bottom corner.
1.6.1 Label n. 01
It provides the following
information:
A) Serial number
B)* Motor power
C)* Operating frequency
D)* Power consumption
* Not applicable to frame
screens.

RELEASE ER2022_03_17
Mod. LEONARDO FR14
14 14
14 14
106 106
106 106
H
Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
2.0 FRAME SCREEN DESCRIPTION
The gures below describe the main elements of the product.
Frame front view
Frame rear view
2.1 GENERAL DESCRIPTION
Structural
frame
Mounting brackets
Thin bezel
Velvet covered
thin bezel
Projection
surface
W

RELEASE ER2022_03_17
Mod. LEONARDO FR14
54
126
1123
50
14
27
129
30
2025
30 30
90
ø18
ø6
106
126
166
Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
Proles combination
Thin bezel covered with
velvet
Thin bezel
aluminium prole
Structural frame
aluminium prole
Projection
surface
Mounting bracket

RELEASE ER2022_03_17
Mod. LEONARDO FR14Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
Structural frame segments (A)
Metal corners (C) Projection surface (D)
Rubber bands (E)
Protective cloth
Galvanized rods (E)
Thin bezel segments (B)
Screws + wall plugs (G)
Pcs. 04
Pcs. 16
Pcs.04
Pcs. 01
Pcs. 02Pcs. 01
Pcs. 04
3.0 ASSEMBLY
3.1 PACKAGING CONTENT:
Inside the packaging, there will be the following components.

RELEASE ER2022_03_17
Mod. LEONARDO FR14
X
1
2
3
Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
First step of Leonardo screen installation consists in assembling the structural
frame.
The slots to be used to insert the metal corners (C) are
n. 1 and n. 3 as shown in the drawing on the right.
Do not use slot n. 2 because this is for the cursors
only.
Step 1a
Step 1b
Place the metal corners (C) near the slots n. 1 e n. 3
of one long structural frame segment (A).
Insert the metal corners (C).
3.2 STRUCTURAL FRAME ASSEMBLY

RELEASE ER2022_03_17
Mod. LEONARDO FR14Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
Put the short structural frame segments (A) close to the metal corners (C).
Insert the short structural frame segments (A).
Step 2a
Step 2b

RELEASE ER2022_03_17
Mod. LEONARDO FR14Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
Step 3b
Step 3a
Insert the metal corners (C) to this frame segment.
Place the remaining metal corners (C) close to the remaining long structural
frame segment.

RELEASE ER2022_03_17
Mod. LEONARDO FR14
L1
L2
L1 = L2
Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
Before tightening all the dowels, in order to perfectly close the metal corners to
the structural frame segments, check that the measurements L1 and L2 are the
same. The maximum tolerance is 2 mm.
Step 4b
Step 4a
Insert the long remaining structural frame segment, in order to complete mounting
of the frame.

RELEASE ER2022_03_17
Mod. LEONARDO FR14Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
Check carefully as above and proceed with tightening the dowels on each corner.
WARNING:
For a perfect assembly, it is necessary to check carefully the xing of the metal
corners (C), because, as shown in the gures below, mistakes will COMPROMISE
the whole installation, causing permanent damages to the cloth.
Mistake B
Outside the
structural frame
Mistake A
Inside the
structural frame
Mistake A
Internal corner
OPEN
Mistake B
External corner
OPEN

RELEASE ER2022_03_17
Mod. LEONARDO FR14
1MT 1MT
1MT 1MT
Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
Check the surface on which
the projection cloth is lying.
Moving
limit
Protective cloth
dimensions limit
Protective
cloth
Check that the area
where you are laying
the projection cloth is
perfectly clean.
Projection
surface
Protective cloth
Projection side
Before xing the cloth, make sure to have enough moving surface for all the
operations, as indicated in the gure below. Before laying the projection cloth
down, make sure that the oor where you will lay the surface is perfectly
clean and smooth. It is mandatory to lay a protective cloth onto the oor, before
laying onto the projection surface.
Handling of the projection surface has to be carried out by at least two people.
The surface has to be layed down with the projection side facing downward.
Do not move the projection surface once it is layed down.
3.3 SURFACES MOUNTING

RELEASE ER2022_03_17
Mod. LEONARDO FR14
X
Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
Check the cloth
Red centre
indicator
Red centre
indicator
Red centre
indicator
Red centre
indicator
After laying the protective cloth, make sure that the projection surface is not
damaged. Moreover, it is advised to leave the cloth layed down for at least 10
minutes, before proceeding with xing it to the pre-assembled structural frame,
as per chapter 3.2.
Check that every red centre indicator on each frame corresponds to the central
ring on the projection surface.
Now, lay the pre-assembled structural frame on the projection surface, making
sure that the rear side of the frame is facing upwards.
Correct position
cursors facing upwards
Wrong position
cursors facing downwards

RELEASE ER2022_03_17
Mod. LEONARDO FR14
L1
L4
L2
L3
L1=L2=L3=L4
Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
For an easy installation of the projection surface to the structural frame, this frame
has to be centered in the most precise way, pairing the red centre indicators
applied on the cloth and the xed centre indicator.
Now the rst 4 rubber bands can be xed. In order to soften them, it is necessary
to stretch them, as shown in the gures below.
Moreover, before proceeding with xing the cloth,
it is necessary to place the structural frame so that
the distances L1, L2, L3 e L4 are the same. This
guarantees that the frame is centered compared to
the cloth.
At the end of this procedure, you will notice that the rubber band is softer and its
length is increased of about 5 mm.
This procedure has the aim to make the screen xing and eventual regulations
easier.
Press strongly the rubber
bands extremities
Stretch the rubber band
moving it from the centre
to the extremities
Fixed centre indicator

RELEASE ER2022_03_17
Mod. LEONARDO FR14Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
Step 4
Step 1
Step 3
Step 5
Step 2
Proceed now with xing the screen to the structural frame.
The drawings below describe how to x the galvanized rods and the rubber bands.
This operation has to be carried out by at least two professional people,
taking care that the surface is very delicate and any damage on it will be
permanent.

RELEASE ER2022_03_17
Mod. LEONARDO FR14
2 2
5 5
6 6
1
1
3
3
4
4
Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
Last
Last
Last
Last
IMPORTANT:
The sequence for xing the rubber bands is shown below.
The rst rubber bands that have to be xed are those necessary for centring the
cloth. It is important that xing is carried out simultaneously starting from the
opposite sides because this denes the exact central position of the cloth.
After having checked the exact centre, proceed with xing all the rubber bands,
following the sequence indicated below: from the centre outwards and the rubber
bands on the corner have to be xed as last ones.

RELEASE ER2022_03_17
Mod. LEONARDO FR14Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
Check for
possible waves
After having xed the cloth to the structural frame, lift the screen in vertical
position, as shown by the gure below and check that there are not waves or
folds on the projection surface.
If there are waves, it is enough to detach and x again the rubber bands.
Waves can appear because of different factors, among the others, the wrong
centring and the wrong sequence of the rubber bands xing.
For example: waves can appear, if the sequence of rubber bands xing is carried
out from the sides towards the centre.
Before proceeding with the bezel assembly, it is important to wait about 10
minutes. During this time, both the screen and the bands have time to settle.
This time is necessary because, after the bezel is mounted on the structural
frame, it is not possible to make adjustments on the rubber bands any more.

RELEASE ER2022_03_17
Mod. LEONARDO FR14
50
1/2
X
1
2
34
7
6
8
9
1011
12
13
Installation manual
This document is property of Euroscreen Srl.
Any reproduction without authorization is prohibited
3.4 THIN BEZEL ASSEMBLY
With a suitable Allen key,
loose the dowels turning
counterclockwise. Correct position
Wrong position
Before proceeding with mounting the thin bezel segments (B), loosen the pre-
mounted dowels on the structural prole, in order to assemble easily the structural
frame to the thin bezel segments. Depending on the size of the screen, the dowels
will always be on the sides and in the centre of the prole at the distances shown
in the gure below.