EVOC M50 Series User manual

Legal Information
Warnings
Please pay attention to the tips within the manual so as to avoid personal injury or
property losses. The tips for personal injury are indicated in warning triangles while
the tips only related to property losses have no warning triangles. The warning tips are
listed as follows with the hazardous scale from severe to slight.
Danger
If handled carelessly, death or severe human injury will occur.
Warning
If handled carelessly, death or severe human injury might occur.
Caution
Warning triangle indicates that slight human injury might occur if handled carelessly.
Note
Unexpected result or status might occur, if not handled according to the tips.
Professional Personnel
The product/system covered by the manual can only be handled by qualified and
professional personnel. During operation, please follow the respective instructive
manuals, especially the safety warnings. The professional personnel have been trained
and possess relevant experiences; therefore, he/she could be aware of the risks of the
product/system and avoid possible damages.
EVOC Product
Please pay attention to the following instructions:
Warning
EVOC product can only be used according to the descriptions within the manual,
including the contents and the relevant technical documents. If the products or
components from other companies are required, please get the recommendation and
grant from EVOC first. Proper transportation, storage, assembly, installation,
debugging, operation and maintenance are prerequisite to ensure product safety and
normal operation; therefore, please ensure permitted environment conditions and pay
attention to the tips within the manual.

Copyright Notice
Information offered in this manual is believed to be correct at the time of printing, and
is subject to change without prior notice in order to improve reliability, design and
function and does not represent a commitment on the part of the manufacturer. In no
event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of improper installation and/or use, or inability to
use the product or documentation.
This user manual is protected by copyright. No part of this manual may be reproduced,
stored in any retrieval system, or transmitted, in any form or by any means,
mechanical, electronic, photocopied, recorded or otherwise, without the prior written
permission from the manufacturer.
Trademarks
EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other
product names mentioned herein are used for identification purposes only and may be
trademark and/or registered trademarks of their respective companies.
Warranty Terms:
The warranty on the product lasts for two years. If the user has additional
requirements, the contract signed between the two sides shall prevail.
Please visit our website: http://www.evoc.com for more information,
or send an email to the Technical Support Mailbox [email protected]
(International) or [email protected] (Domestic) for consultation.
Hotline: [phone]

About this manual
Scope of the Manual
The manual is appropriate for EVOC M50 SERIES.
Convention
The term “the PC” or “the Product” within the manual usually stands for EVOC
M50 SERIES.
Instructions
Safety instructions
To avoid property losses or individual injury, please pay attention to the
safety instructions within the manual. The warnings within the manual are
marked with warning triangle , whose existence is dependent upon the scale
of the potential hazard.
History
Version release of this manual:
Version Time
B00 2018.3
C00 2018.5

Safety Instructions
General Safety Instructions
Caution
Please do not expand your device unless you have read related safety instructions.
This product is compliant with safety requirements related to information technology.
If you have any question or doubt about effectiveness of installation in the planned
environment, please contact your service representative.
Maintenance
This product can only be maintained by authorized personnel.
Warning
Unauthorized opening of the product or improper repair may lead to severe
damage to the product or even jeopardize personal safety of the user.
System Expansion
Only system expansion device designed for this product can be installed. Installing
other expansion device may damage the system and violate radio interference
suppression regulations. To know the system expansion device which can be installed,
please contact technical support team or purchase location.
Caution
If the product is damaged due to installation or replacement of system expansion
device, the warranty will become invalid.

ESD Instructions
The following label can be used to identify the modules that contain electrostatic
sensitive devices:
When operating the modules that contain electrostatic sensitive devices, please follow
the instructions below:
When operating the modules that contain electrostatic sensitive devices, make
sure to release static electricity on your body (for example, by touching a
grounded object).
All the devices and tools should not contain ESD.
Before installing or removing modules that contain ESD, make sure to pull out
the power plug and remove the battery.
When assembling modules that contain ESD, always handle them by their edge.
Please do not touch any connector pin or conductive part on the modules that
contain ESD.

Contents
1. Product Introduction .................................................................................................1
1.1 Overview .......................................................................................................1
1.2 Specifications ................................................................................................2
1.3 Operating Instructions ...................................................................................6
1.3.1 External Functions.............................................................................6
1.3.2 Internal Layout ..................................................................................9
1.3.3 Operation Control..............................................................................9
1.4 Status LED ..................................................................................................10
2. Application Scheme ................................................................................................11
2.1 Transportation.............................................................................................. 11
2.2 Storage.........................................................................................................11
2.3 Opening the Box and Initial Examination....................................................12
2.3.1 Opening the Box..............................................................................12
2.3.2 Markings for PC Identification........................................................12
2.4 External Environment Conditions ...............................................................12
3. Product Installation.................................................................................................14
3.1 Installation Information ...............................................................................14
3.2 Mounting Method........................................................................................14
3.2.1 Wall Mount Installation ...................................................................14
3.3 Application Environment of Fully-enclosed Computer ...............................15
4. PC Connection........................................................................................................18
4.1 Things to Know before Connection.............................................................18
4.2 Product Grounding ......................................................................................18
4.3 Connecting the Device to Power .................................................................19
5. Debugging ..............................................................................................................20
5.1 Operating System ........................................................................................20

5.2 Port Definition.............................................................................................20
5.2.1 DC Power Input Connector .............................................................20
5.2.2 AUDIO Port.....................................................................................20
5.2.3 USB Port .........................................................................................21
5.2.4 PS/2 Keyboard/Mouse Port .............................................................22
5.2.5 Network Port ...................................................................................22
5.2.6 DVI Port ..........................................................................................23
5.2.7 VGA Port.........................................................................................24
5.2.8 HDMI Port ......................................................................................24
5.2.9 Standard DB9 COM Port.................................................................25
5.2.10 GPIO Port......................................................................................26
6. Software Introduction .............................................................................................27
6.1 BPI Overview ..............................................................................................28
6.2 FMI Overview .............................................................................................30
6.3 eManager Software......................................................................................31
6.3.1 Operating Environment ...................................................................31
6.3.2 Function...........................................................................................32
6.3.3 Firmware Management....................................................................35
7. BIOS Setup.............................................................................................................38
(Suitable for M50-E models).............................................................................38
7.1 UEFI Overview ...........................................................................................38
7.2 UEFI Parameter Setup .................................................................................38
7.3 Bay Trail platform UEFI Basic Function Setup...........................................39
7.4 System Resource Managed by UEFI under X86 Platform...........................55
(Suitable for M50-H models).............................................................................61
7.5 UEFI Overview ...........................................................................................61
7.6 UEFI Parameter Setup .................................................................................61

7.7 Basic Function Setting for UEFI .................................................................62
7.8 System Resource Managed by UEFI under X86 Platform...........................80
8. Installing Expansion ...............................................................................................86
8.1 Opening the PC............................................................................................86
8.2 HDD Expansion...........................................................................................87
8.3 Installing/Removing the MiniPCI-E, M-SATA............................................88
8.4 SIM Card Expansion ...................................................................................90
9. PC Maintenance......................................................................................................92
9.1 Removal/Installation of Hardware Assembly ..............................................92
9.1.1 Carry out Maintenance ....................................................................92
9.1.2 Preventative Maintenance ...............................................................92
9.1.3 Replacing Backup Battery...............................................................93
9.2 Installing the Drivers ...................................................................................94
10. Technical Parameters ............................................................................................95
10.1 Maximum Power Consumption of Accessory Assemblies.........................95
11. Dimensions Drawing ............................................................................................96
11.1 Dimensions Drawing Overview.................................................................96
11.2 Product Outline Dimensions Drawing .......................................................96
11.3 Product Installation Dimensions Drawing .................................................97
12. Appendix...............................................................................................................99
12.1 Troubleshooting and Solutions ..................................................................99
12.2 Common Alarm Information Analysis and Solution................................101
12.3 ESD Guideline.........................................................................................101
12.4 Abbreviations...........................................................................................103
12.5 Terminology Glossary .............................................................................112

Product Introduction
M50 SERIES · 1 ·
1. Product Introduction
1.1 Overview
M50 is a fanless low-power high-performance embedded PC, which contains onboard
sixth-generation Intel® Core™ i7/i5/i3 processors or onboard J1900 processor+Bay
Trail platform chip technical solution, and supports WIN7(64bit), WIN10, LINUX
(Kernel 2.6) operating systems.
The PC has a simple structure, and small form factor. Its chassis is shaped by
aluminum alloy. The PC has compact structure, rugged and fanless design. Its chassis
also serves for heat dissipation, and has excellent sealing and dust-proof, heat
dissipation and anti-vibration performance.
M50 products are designed for machinery testing equipment, industrial automation
control, intelligent traffic, highroad lane control, etc.
M50-E-01
M50-E-02

Product Introduction
· 2 · M50 SERIES
M50-H-01/02/03
M50-H-04
1.2 Specifications
Item Definition
Microprocessor
Skylake-U platform: supports on-board Intel I3-6100U/
I5-6300U/I7-6500U CPU
Bay Trail platform: supports on-board Intel Celeron J1900
CPU
Note: Refer to the actual configuration for details.
Main Functional Index
Chipset Based on skylake-u and Bay Trail platform

Product Introduction
M50 SERIES · 3 ·
Memory
Skylake-U platform: Onboard 4G DDR4 2133MHZ
memory, providing one 260Pin DDR4 SO-DIMM memory
slot, which supports up to 16GB. The PC supports up to
20GB memory capacity.
Bay Trail platform: J1900 motherboard: It provides one
SO-DIMM memory slot, 4G DDR3L memory as standard
configuration, up to 8G memory capacity (SO-DIMM), and
8G DDR3L memory module must be dual-rank memory.
Note: The PC with 4GB memory (others optional)
Display
Supports three kinds of display ports: VGA, HDMI,
DVI-D.
VGA supported minimum resolution: 640×480;
supported maximum resolution: 1920×1080
HDMI supported maximum resolution: 4096×2160
DVI-D supported maximum resolution: 1920×1200
Network
Supports up to four 10/100/1000Mbps LAN ports. LAN1
supports Wake-On-LAN
Audio HD standard, supporting MIC-IN/LINE-OUT
Storage
1 x MSATA interface
1 x SATA interface, supporting hotswap
Expansion bus
Provides two Mini PCIe sockets. MPCIe1 can be used for
common Mini PCIe slot card and wireless network card;
MSATA1 can be used for common Mini SATA interface
card and 4G module.

Product Introduction
· 4 · M50 SERIES
External IO
ports
Up to four COM ports, support RS-232/RS-422/
RS-485 mode selection; RS-232 by default
Up to: two USB3.0 ports + four USB2.0 ports or one
USB3.0 port +five USB2.0 ports
1 x PS/2 keyboard/mouse port
Up to four 10/100/1000Mbps LAN ports
1 x VGA connector
1 x HDMI connector
1 x DVI connector (optional)
1 x AUDIO connector (support MIC, LINE-OUT)
1 x 8-bit GPIO port (using 1×10 Phoenix terminal
block)
Note: The quantity and type of the above ports may
vary with different platforms and configurations. The
actual product shall prevail, if there is any difference.
External
dimensions
(excluding
mounting ear)
M50-E: 176mm (W) × 53.5mm (H) × 148.5mm (D)
M50-H: 190mm (W) × 65.5mm (H) × 148.5mm (D)
Net weight
M50-E: About 1.55Kg
M50-H: About 2.25Kg
(excluding package and accessories)
Color Silver
Major Performance Index
Temperature
Operating temperature:
Operating with mechanical hard disk: 0℃～45℃
Operating with SSD hard disk: -10℃～+60℃
Storage temperature: -30℃～+65℃

Product Introduction
M50 SERIES · 5 ·
Humidity Temperature 40℃, relative humidity 95% (non-condensing)
EMC
GB 9254-2008 Radio Disturbance Class(A)
GB 9254-2008 Conduction Emission Class(A)
GB/T 17626.2.2006 ESD Level(2)
GB/T 17626.4-2006 Burst Immunity Level(2)
GB/T 17626.5-2008 Surge(impact) immunity Level(2)
GB/T 17626.6-2008 Conduction Immunity Level(2)
RELIABILITY
MTBF≥100000h
MTTR≤0.5h
Safety Meets basic requirements for GB4943-2011
Mechanical
and
environmental
adaptability
Sine vibration:5-15Hz/1.0mm amplitude; 15-200Hz/
1.0g acceleration(Electronic disk)
Anti-shock: 15G, half-sine, pulse width: 11ms,
three-axis six-direction.
Power feature
Input voltage/frequency: 220VAC/50Hz (with
adapter)
Input voltage/current: 9VDC-30VDC (no adapter,
direct input to the PC)
Power consumption of the PC: 14.6W (standby status)
Power consumption of the PC: 30.4W (operating
BurnIn test)
Note: The power consumptions above are for reference
only, and actual product shall prevail if there is any
difference.

Product Introduction
· 6 · M50 SERIES
1.3 Operating Instructions
1.3.1 External Functions
Front View of the PC Location Description
1 Switch button
2 Reset button
3 HDD indicator
4 Keyboard/mouse
port
5 GPIO port
6 USB1/2 or DVI
(optional)
7 ANT2
8 HDD bay
9 Power indicator
M50-E
M50-H
10 ANT1

Product Introduction
M50 SERIES · 7 ·
Rear View of the PC Location Description
1 Ground screw
2 Power connector
3 HDMI
4 VGA
5 USB3/4
6 LAN1
7 LAN2
8 COM4
9 COM3
10 COM2
11 COM1
12 MIC IN
M50-E-01
M50-H-01/02/03
13 LINE OUT

Product Introduction
· 8 · M50 SERIES
Rear View of the PC Location Description
1 Ground screw
2 Power connector
3 HDMI
4 VGA
5 USB3/4
6 LAN1
7 LAN2
8 LAN4
9 LAN3
10 USB5/6
11 COM2
12 COM1
13 MIC IN
M50-E-02
M50-H-04
14 LINE OUT
Note: For different configurations of the PC (with different motherboards), the
external IO ports may be different, and the actual configuration prevails.

Product Introduction
M50 SERIES · 9 ·
1.3.2 Internal Layout
Internal Layout of the PC Location Description
1 Motherboard
2 IO board
3 HDD
1.3.3 Operation Control
Warning
Pressing On/Off button won’t cut off the power of the PC!
Caution
When the PC executes hardware reset, data may be lost.

Product Introduction
· 10 · M50 SERIES
Control Button Location Description
1
Reset button
A pointed object or a clip
can be used to operate the
reset button. Pressing this
button will trigger
hardware reset.
2
On/Off button used to
switch on/off the PC.
1.4 Status LED
Display Meaning LED Description
Off Disconnected from power
POWER Displaying PC status
Green PC is operating
Off No access
HDD Displaying hard drive
status Yellow Being accessed

Application Scheme
M50 SERIES · 11 ·
2. Application Scheme
2.1 Transportation
Well-packaged products are suited for transportation by truck, ship, and plane. During
transportation, products should not be put in open cabin or carriage. During
transshipping, products should not be stored in open air without protection from the
atmospheric conditions. Products should not be transported together with inflammable,
explosive and corrosive substances and are not allowed to be exposed to rain, snow
and liquid substances and mechanical force.
2.2 Storage
Products should be stored in package box when it is not used. And warehouse
temperature should be 0°C ~ 40°C, and relative humidity should be 20% ~ 85%. In
the warehouse, there should be no harmful gas, inflammable, explosive products, and
corrosive chemical products, and strong mechanical vibration, shock and strong
magnetic field interference. The package box should be at least 10cm above ground,
and 50cm away from wall, thermal source, window and air inlet.
Caution!
Risk of destroying the device!
When shipping the PC in cold weather, please pay attention to the extreme
temperature variation. Under this circumstance, please make sure no water
drop (condensation) is formed on the surface or interior of the device. If
condensation is formed on the device, please wait for over twelve hours before
connecting the device.

Application Scheme
· 12 · M50 SERIES
2.3 Opening the Box and Initial Examination
2.3.1 Opening the Box
Please pay attention to the following issues when opening the box:
Do not discard the original packing material. Please keep the original packing
material for re-transportation.
Please keep the documentation at a safe place. The documentation, which is a
part of the device, is required for initial device debugging.
When doing the initial examination, please check whether there are distinct
damages to the device caused during the transport.
Please check whether the delivery contains the intact device and all of the
independently ordered accessories. Please contact the customer service when
any unconformity or transportation damages occur.
2.3.2 Markings for PC Identification
Attention
When the product needs to be repaired or after it has been stolen, these codes can
be used to identify the PC. Please do not rip them off.
Serial number: located on the chassis body (as shown below)
2.4 External Environment Conditions
The following conditions should be considered when planning the project: