EZee Life CH3053 User manual

Model # CH3053
Limited Warranty:
EZee Life™ products carry a one year warranty against
manufacturing defects, faulty materials and workmanship only.
Any alterations, misuse, abuse, or accidental damage voids this
warranty. EZee Life™ reserves the right to replace or repair any
part
that has become defective.
The warranty does not extend to consequential costs resulting
from the fault or defect of the product: freight and travel costs,
loss of earnings, or other expenses that one may incur.
Warranty is valid for the original purchaser only and the original
receipt must be presented before any warranty options are
considered. Please also be prepared to provide the date of
purchase and serial number.
EZee Life™ Products
34 Futurity Gate, Unit 15, Concord Ontario L4K 1S6
Bed Safety Rail
User Manual
….................................................

Description:
The EZee Life™ 3053 bed rail is a transfer assist product that provides
users a secure handhold to use when entering or leaving their bed that
can be used on any conventional bed. Fits all bed widths and features a
security strap for added safety.
Features:
Tool free assembly
Adjustable height up to 21.7”
Slip resistant foam hand-grip
Safety strap
Can be used on either side of bed
Non-confining
Fits all standard bed widths
Convenient storage pockets
Specifications:
Length: 19.6”
Height: 17.7” to 21.7”
Under mattress length: 36.2”
Frame material: Steel
Weight capacity: 300 lbs
Assembly:
1. Slide the straight bars (A) through the long strap loops and onto the end
bar (E) until the bars lock together.
2. Slide the “L” shaped bars (B) into the straight bars (A) until the bars lock
together and slide the end loops of the
short strap onto the “L” (B) bars.
3. Slide the hand bar (C) onto the “L”
bars (B). Align the holes at the height
required and insert locking pins (D).
4. Using the attached pocket straps,
attach the storage pocket (F) to hand
bar (C) below the foam hand grip.
5. Slide the assembled unit between
the mattress and box spring at the
point along the bed best suited for the
user.
6. Adjust Hand bar height using
locking buttons (F) below hand-grip
foam.
2

Strap Instructions:
1. The long arms and end bar of the bed
safety rail sits on top of the box spring, or
bed pan, underneath the mattress.
2. The long straps are threaded from the
end bar (A), across the top of the box
spring, down the far side and back to the
bar side of the bed underneath the bed.
3. The long straps buckle into the short
straps that are attached to the “L” (B) bar
at the bend.
4. Adjust straps so that they are tightly
wrapped around the box spring or bed
pan and don't slip or slide.
5. Check straps regularly by pulling on the M
bar (C) in different directions. If it moves,
the straps need to be re-tightened.
3

Warning: This bed rail is not designed or intended to keep a person from
falling or rolling out of bed. It is designed to assist the user in entering and
leaving the bed by providing a safe handhold.
Warning: Do not use this Bed Rail without the properly connecting the
supplied safety strap. Use without the safety strap can allow the bed rail
to slip out of position, creating a dangerous gap between the handle and
the mattress side posing a risk of entrapment, strangulation and death.
Warning: In order to safely use the Safety Bed Rail the rail must be
tightly held against the side of the mattress using the safety strap.
Contact your dealer if you aren't able to install the rail correctly and
require assistance. Do not use without properly attached safety strap.
Bonus: Convenient Bedside Pockets
To install the bedside pockets first wrap the elastic side straps around the
bed rail side bars at the desired height and snap clasps closed.
Bedside storage pockets are available
on both sides of the bed rail handle
for convenience and provide a barrier
to minimize the chances of limbs
passing through the rail and trapping
the user.
With the convenience of bedside
pockets you can find your things
when you want them. Reading
materials, glasses, television remote
control and flashlight to name a few.
Secured with metal snaps on the sides and buckled straps on the top these
storage pockets are easily removed without removing the bed rail from the
bed.
Date of Purchase: _________________________
Dealer Name: _____________________________
Dealer Location: ___________________________
4