Fac F250 TS-V User manual

100% Made in Italy
1 F250 TS-V - F300TS-VR
2F250 TC-V - F300 TC-VR
3F300 TS-VL - F330 TS-VL - F350 TS-VL - F370 TS-VL
4F300 TC-VL - F330 TC-VL - F350 TC-VL - F370 TC-VL
1 2 3 4
EC Professional Vertical Electrical Slicers
EN
USE AND MAINTENANCE MANUAL
FAC SRL
macchine affettatrici industriali e familiari
Via Morazzone, 137 - 21044 CAVARIA (VA)
Tel. [phone] - Fax. [phone]
www.slicers.it
[email protected]

100% MADE IN ITALY 100%

100% Made in Italy
1 F250 TS-V - F300TS-VR
2F250 TC-V - F300 TC-VR
3F300 TS-VL - F330 TS-VL - F350 TS-VL - F370 TS-VL
4F300 TC-VL - F330 TC-VL - F350 TC-VL - F370 TC-VL
1 2 3 4
EC Professional Vertical Electrical Slicers
EN
USE AND MAINTENANCE MANUAL

3
EN
• USER NOTE ................................................................................................................ Pag. 3
• GENERAL WARNINGS................................................................................................ Pag. 4
• USE WARNINGS ......................................................................................................... Pag. 9
• MANUFACTURER’S WARRANTY AND RESPONSIBILITIES ................................... Pag. 10
• PACKING..................................................................................................................... Pag. 11
• NAMEPLATES - CONFORMITY MARKINGS ............................................................. Pag. 12
• SUPPLIED ACCESSORIES........................................................................................ Pag. 13
• TECHNICAL DESCRIPTION AND INTENDED USE .................................................. Pag. 14
• ELECTRICAL AND MECHANICAL SAFETY DEVICES.............................................. Pag. 15
• MAIN TECHNICAL DATA ............................................................................................ Pag. 16
• MAIN COMPONENTS................................................................................................. Pag. 19
• INSTALLATION AND PRELIMINARY CHECKS.......................................................... Pag. 22
• USING THE MACHINE ............................................................................................... Pag. 24
• SLICER CLEANING .................................................................................................... Pag. 29
• MAINTENANCE .......................................................................................................... Pag. 40
• MOTOR BELT TENSION ADJUSTMENT.................................................................... Pag. 45
• TAKING THE SLICER OUT OF SERVICE.................................................................. Pag. 46
• TROUBLESHOOTING ................................................................................................ Pag. 47
• ELECTRICAL SCHEMES............................................................................................ Pag. 49
• SPARE PARTS............................................................................................................ Pag. 51
• MOCA DECLARATION .................................................................................................. Pag. 60
• DECLARATION OF CONFORMITY ............................................................................ Pag. 67
USER NOTE
This publication shall consist of n°72 pages as specied below:
• Title page with Notes for the User (no print back);
• Index of contents, pag. 3;
• From pag. 3 to pag. 67: progressive numeration.
The manufacturer reserves its right to bring changes to the information indicated in the manual
without the obligation to communicate it in advance, as long as they don’t alter safety.
INDEX

4
GENERAL WARNINGSGENERAL WARNINGS
EN
Meaning of warning signs found in booklet
DANGER: Indicates an imminently hazardous situation
which, if not avoided, could result in serious injury
or even death. The use of this term is limited to the
most extreme situations.
ATTENTION: Indicates a potentially hazardous situation
which, if not avoided, could result in serious injury
(and in extreme cases death).
WARNING: Indicates a potentially hazardous situation
which, if not avoided, may result in minor injuries
to personnel or damage to equipment. It also alerts
the user on incorrect operating modes.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Safety warnings
indispensable before use
Carefully read the warnings contained in these instructions
since they supply important safety, use and maintenance
indications of the vertical slicing machines for food use.
The purpose of this publication, simply dened ‘manual’ below, is to
allow the user, especially to the direct operator to take every measure
and to prepare all the necessary human and material resources for
a safe and durable use of the. This booklet MUST be kept for all the
slicer lifetime and in case of need (example: damage tampering even
partially its consultation, etc.) the user must ask for a new copy to
the manufacturer.
☞

5
GENERAL WARNINGSGENERAL WARNINGS
EN
In case of sale of the slicer, deliver to the new owner this manual too.
☞
The installation must be performed following the instructions
of the manufacturer. A wrong installation can cause damages
to people, animals or things, in respect of which the
manufacturer cannot be considered responsible.
Children should not use the device as a
toy and should neither clean nor use the
equipment.
Keep away the children form the device and the power
cord.
The appliance must be used by adults adequately trained
for the purpose who have carefully red the content of this
manual.
• The elements of the packing (plastic bags, expanded polystyrene, etc.)
must be kept out of reach of children as they are potential sources of
danger.
The electrical safety of this device is ensured only when it’s
correctly connected to an efcient grounding installation
in accordance with the electrical safety standards in force.
• It’s necessary to verify this fundamental safety requirement and, in case
of doubt, ask for an accurate installation safety control by professionally
qualied personnel.
The manufacturer cannot be considered responsible for any
damage caused by lack of installation’s grounding.

6
GENERAL WARNINGSGENERAL WARNINGS
EN
• Before plugging the appliance make sure that the data on the label
correspond to those of the electrical distribution network.
• The plate is on the bottom of the appliance.
• For your safety, it is recommended to power the device through a circuit
breaker (DRC) with trip current not exceeding 30 mA.
• In case of incompatibility between the socket and the plug of the
appliance have the die-cast wire and plug with another one suitable
by an authorized retailer. In case of tampering the manufacturer
doesn’t answer neither for safety, nor for warranty. Alternatively have
the socket replaced with a suitable type by a qualied professional.
The latter, in particular, will also have to ensure that the section of the
socket cables is suitable for the power absorbed by the appliance.
In general it is not advisable to use adapters, multiple sockets and/or
extensions.
• Do not connect the appliance to the electrical power through external
timers or remote operating systems.
• The use of any electrical appliance requires the observance of some
basic rules. in particular:
- do not touch the appliance with wet hands
- do not use the appliance barefoot
- do not pull the power cord or the appliance itself to remove the plug
from the socket
- do not leave the appliance exposed to atmospheric agents (rain, sun,
etc.)
- do not move the appliance when is running.
- the appliance was not designed to be used under rain and must not
be deposited outdoor or in damp places.
• In case of failure and/or malfunction of the appliance, turn it off and
don’t tamper it.
For repairs apply only to the manufacturer or to a service centre
authorized by the same and require the use of genuine spare parts.
Failure to comply with the above may compromise the security of the
device.

7
GENERAL WARNINGSGENERAL WARNINGS
EN
• If you decide not to use a device of this type any more, it must be
made inoperative by cutting the power cord after removing the plug
from the socket.
It is also recommended to make harmless those parts of the equipment
which may constitute a danger, especially for children who might use
an abandoned appliance for their games.
• To avoid dangerous overheating, it is recommended to extend the
power cord to its full length and use the appliance as recommended
in “USING THE MACHINE”.
☞
During the functioning, the socket must be easily accesible
in the event that becomes necessary to unplug the appliance.
Do not place the appliance under a socket so that the wire
doesn’t interfere with the correct use of the machine.
• Do not leave the appliance plugged in unnecessarily. Unplug it from
the power supply when the device is not used.
• After use, always switch off the unit and remove the plug from the
socket.
• After each use, always perform a thorough cleaning of all parts in contact
with food, as mentioned under “Cleaning the slicer”.
• Do not block the openings, ventilation or heat dissipation slots.
• If the power cord of this appliance is damaged, it must be replaced
by a service centre authorized by the manufacturer, as special tools
are required.
Before performing a by operation turn off the appliance
and disconnect the power plug from the socket.
☞
Make sure the power cord does not protrude from the oor
to avoid that someone can pull it also inadvertently knocking
the appliance.

8
GENERAL WARNINGSGENERAL WARNINGS
IT
☞
Place the appliance on a horizontal and rm supporting plane,
whose surface is not sensitive (eg. Lacquered furniture,
tablecloths etc.). Make sure that the appliance is safely
supported.
☞
Do not place the appliance on or near heat sources.
Place the appliance far from sinks and faucets.
☞
The blades are sharp; handle with care.
Do not use the appliance if the blades are damaged.
☞
Never immerse the appliance in water.
☞
Do not use the appliance in environments containing explosive,
combustible gases or ammable liquids (paints, glues, spray cans,
etc.).
DANGER OF EXPLOSION AND FIRE .
• This device is intended for domestic and professional use.
☞
This appliance must be used only for the purpose for which
it was designed, that is for slicing food products (see page
15) in respect to the directives and regulations reported in
the declaration of conformity (see next to last page).
Do not remove safety devices and do not alter or remove
mechanical and electrical guards.
☞
Always use protective scratch-proof gloves for cleaning and
maintenance.
☞
Do not operate the empty appliance.

9
EN
☞
In case of problems with the appliance, contact an authorized
service centre.
Do not attempt to repair the device yourself.
Any repair work carried out on the device by
unauthorized personnel will void the warranty
even if its life had not come to an end.
☞
If you have any doubts regarding the contents of the user
guide or require additional information, please contact the
manufacturer or technical support immediately quoting the
clause number of the topic in question.
☞
No part of this publication shall be reproduced or transmitted
without written permission from the manufacturer.
☞
Use of the machine requires great concentration, PAY
ATTENTION AT ALL TIMES!
USE WARNINGS
• Do not wear loose-tting clothes particularly with open sleeves; where
necessary use suitable headgear to cover hair.
• When slicing, do not allow anyone to approach the slicer, especially
the blade.
• Do not remove, cover or alter the rating plates tted to the machine
body and ensure their prompt replacement in case of damage.
• Ensure that the product tray, receiving tray, surrounding areas and
oor are kept clean and dry at all times.
• Do not use the slicer as a supporting surface or lay any object on it
that is extraneous to normal slicing operations..
• Place and remove the goods to be sliced on the sliding plate only with
the platter completely retracted (away from the blade) and the cart
totally towards the operator.
GENERAL WARNINGS

10
EN
☞
DO NOT use slicing accessories that have not been supplied
by the slicer manufacturer
• Do not damage the blade by cutting hard objects (bones, etc.).
• If the size of the food to be sliced are higher than those indicated
under “Working cut” in the table “Technical data”, reduce its size to
work safely.
USE WARNINGS
• This device is guaranteed for 24
months.
The purchase date must be proven with
the relevant document.
In the absence of valid fiscal document,
the warranty claim can not be exercised.
• In case of non-compliance the claim
must be made in writing within two
months from the observation of the
defect attaching the tax document,
compiled in the act of buying, with stamp
and signature of the store.
Manufacturer’s warranty and responsibilities
• The guarantee of proper operation and
full compliance of the machines to their
intended service depends on the correct
application of the instructions contained
in this manual.
• The manufacturer is not responsible
directly and indirectly for any damage
caused by improper use of the device
resulting from :
- failure to follow instructions contained
in this manual;
- use of untrained personnel;
- use not in accordance with specific
regulations, in force in the country of
installation;
- changes and / or unauthorized
repair;
- use of accessories and unoriginal
spare parts;
- misuse of the machine with different
functionality from the one it has been
built for.
- incorrect installation.
- failure to comply with the specic
power techniques
- insufcient or incomplete periodic
maintenance.
- use by people under the age of 18.
- use by people whose physical,
sensory or mental skills are reduced.
- exceeding the loading limits allowed
by the machine
- use in environments different from
the food one
- exceptional events.
MANUFACTURER’S WARRANTY AND RESPONSIBILITIES

11
EN
1.1 - UNPACKING
When taking delivery of the slicer, ensure
that the packaging is fully intact; if this is
not the case, please advise the courier or
local dealer immediately.
In order to remove the slicer from the
packaging, please proceed as follows:
• Cut and remove the plastic bands.
• Open the box and take out the instruc-
tion booklet.
• Proceed as described hereafter.
- Remove the protective cardboard
covers from inside the box .
- Lift the machine with great care
and place on a solid surface.
- Remove the plastic bag in which
the slicer is wrapped.
Check that all components specified
in the delivery note and this in-
struction booklet are present and
fully intact.
• Should any faults be noted, such as:
- dents to the frame or guards;
- controls that are either not
working or broken;
- missing items or other problems;
please advise the courier, manufac-
turer and service centre immediately.
- Carefully dispose of packaging com-
ponents (bands, cardboard, polysty-
rene, polythene bags, etc.) as report-
ed below and in accordance with the
standards of the below and compli-
ance with the standard of Country of
use.
PACKING
This product complied with Directive 2012/19/EU.
The crossed out wheeled bin symbol on equipment indicates that it must be treated separately
from household waste at the end of its working life and therefore taken to a recycling facility for
electrical and electronic equipment or handed over to the reseller when purchasing new equipment
of the same type.
The user is responsible for consigning the equipment to appropriate collection facilities at the end
of its working life or face the penalties provided for by current waste management legislation.
Separate collection for subsequent delivery of waste equipment to environmentally-compatible
recycling, treatment and disposal facilities to prevent possible negative impacts on the environment
and human health whilst encouraging recycling of the product’s components.
For further information regarding the available collection facilities, please contact your local refuse
collection service or the shop in which the purchase was made.
Manufacturers and/or importers fulfil their obligations concerning environmentally-compatible
recycling, treatment and disposal either directly or by joining a collective scheme .
GUIDE TO THE TREATMENT OF WASTE EQUIPMENT

12
Fig. 1
EN
The packing components ( bands , card-
board , polystyrene , etc.) are products
assimilable to the urban solid refusals.
NAMEPLATES - CONFORMITY MARKINGS
The device described in this manual
is produced in accordance with the
directives in force, as amended. All
component parts are adapted to the
requirements of the Directive and the CE
mark testifying the compliance.
The plate with the identification of the
manufacturer, the technical machine and
the CE marking is located on the base of
the slicer
(gure 2).
DO NOT DUMP PACKAGING!
DISPOSE OF WASTE
RESPONSIBLY!
☞☞
The plate must never be re-
moved and must always be
legible.
In case of wear or dam-
age the user is required
to replace it.

13
MADE ITALYIN
ATTENZIONE
OSSERVARE ATTENTAMENTE LE ISTRUZIONI PER
L’INSTALLAZIONE, USO, PULIZIA E MANUTENZIONE
FORNITE DAL COSTRUTTORE.
WARNING
STRICTLY FOLLOW THE INSTRUCTIONS FROM THE
MANUFACTURER FOR INSTALLATION, USE, CLEANING
AND MAINTENANCE.
ATTENTION
RESPECTEZ STRICTEMENT LES INSTRUCTIONS DU
FABRICANT CONCERNANT L’INSTALLATION,
L’UTILISATION, LE NETTOYAGE ET LA MAINTENANCE.
ACHTUNG
SORGFÄLTIG DIE VON DEM HERSTELLER GEGEBENEN
ANWEISUNGEN ZUR INSTALLIERUNG, BEDIENUNG,
REINIGUNG UND WARTUNG BEACHTEN.
ATENCION
OBSERVAR ESCRUPOLOSAMENTE LAS INSTRUCCIONES
PARA: INSTALACION, USO, LIMPIEZA Y MANUTENCION
FACILITADAS POR EL CONSTRUCTOR.
TYPE
N. /ANNO
KW. V- Hz.
CE USO PROFESSIONALE
MADE INI T A L Y
IPX1
Fig. 2
EN
Unless otherwise dened at the
moment of order, the machines are
supplied together with the following:
SUPPLIED ACCESSORIES
• EU conformity declaration;
• instructions manual for installation,
use and maintenance;
• oiler.

14
EN
TECHNICAL DESCRIPTION
AND INTENDED USE
2.1 - General description
The slicer is mainly constituted by a
footing which supports a circular blade,
driven by an electric motor, which has the
function of slicing food products and by a
carriage sliding on rails which on its turn
supports a carriage plate, parallel to the
blade .
The slice thickness is adjustable thanks
to a gauge plate placed before the
blade; This plate, against which rests
the product to be cut, can be moved
transversely with respect to the blade by
a value corresponding to the desired slice
thickness.
The product is fed to the machine (to-
wards the gauge plate) by weight (grav-
ity).
All components of the machine are made
of alluminum alloy polished and anodi-
cally oxidized, stainless steel and plastic
material for food use.
The cutting blade is driven by an electric
motor and the motion transmission is
obtained with a longitudinally grooved belt.
Start and stop are performed with a button
provided with auxiliary circuit preventing
accidental restarts after an outage .
The machine incorporates (in some
versions) a sharpener built for ease of
use and safety.
2 .2 - Environmental conditions of
the machine use
• Temperature ....from -5 °C to + 40 °C
• Relative humidity...............max 95%
2 .3 - Slicer correct use
The slicer is only designed to slice food of
the type and within the dimensional limits
indicated in this instruction manuals .
2.3.a - Intended use
(sliceable products)
The following products may be sliced:
• All types of cold cuts (raw and cooked
ham, bacon).
• Boneless meat (cooked or raw at a
temperature of not less than +3°C) .
• Bread and cheese (obviously the
sliceable type such as Gruyère, Fonti-
na, etc.).
2.3.b -Unexpected or improper use
(NOT sliceable products)
The following products CANNOT be
sliced as they are liable to cause serious
harm to the user and/or slicer itself :
• Frozen food .
• Deep-frozen food.
• Food with bones (meat and fish).
• All types of foods and vegetables
• Any other type of product specifically
excluded product is sliceable but not
intended to be eaten.

15
EN
ELECTRICAL AND MECHANICAL SAFETY DEVICES
The mechanical safety devices taken
are the following:
• A series of aluminium and
transparent plastic guards on the
product carriage.
The electrical safety devices taken
are the following:
• Start/stop button that requires the
machine voluntary restart in case
of an outage or interruption of the
power supply.
• Start up and stop are performed with
the button connected to a control
auxiliary network that prevents
accidental start ups of the appliance
after a possible electrical power cut.
Do not tamper, remove nor bypass, under no circumstances,
the safety devices installed on the equipment.
3 .1 - Residual risks
During slicer use, cleaning and maintenance operations,
notwithstanding all the possible cautions taken during the design
and the construction of the machine, residual risks (cutting) still
exist during use or during cleaning or maintenance. Therefore be
careful and PAY THE UTMOST ATTENTION to what you are doing.
DO NOT use the machine if you are not in perfect psychological
and physical conditions.
DO NOT ALLOW anyone near the machine when it is in use.
ALWAYS wear gloves that can resist cuts or tears when cleaning,
lubricating or sharpening the blade.

16
E
D
B
C
A
D
E
B
D
A
C
C
F250 TC-V F300 TC-VR F250 TS-V F300 TS-VR
A mm 360 360 360 360
B mm 460 460 460 460
C mm 520 520 520 520
D mm 610 610 610 610
E mm 500 500 515 515
EN
MAIN TECHNICAL DATA
TECHNICAL SPECIFICATIONS
Single-phase motor* ...... HP 0,35 0,35 0,35 0,35
115-220-230-240V~ 50/60Hz
ø Blade ........................... mm 250 300 250 300
Rpm............................. r.p.m. 300 300 300 300
Slice thickness............... mm 0÷16 0÷16 0÷16 0÷16
Working cut: L x H ......... mm 215 x 170 215 x 210 240 x 170 240 x 195
Weight ........................... kg 21 24 25 27
* All the versions are equipped with a ventilated motor.
Supply voltage: See the data plate on the machine base.
mod. “TC-V”
mod. “TC-VR”
mod. “TS-V”
mod. “TS-VR”
mod. “TC-V”
mod. “TC-VR”
mod. “TS-V”
mod. “TS-VR”

17
E
D
B
C
A
B
E
D
A
C
F300 TS-VL F330 TS-VL F300 TC-VL F330 TC-VL
A mm 400 400 400 400
B mm 560 560 560 560
C mm 570 570 615 615
Dmm 790 790 830 830
Emm 660 660 590 590
EN
TECHNICAL SPECIFICATIONS
Single-phase motor* ...... HP 0,50 0,50 0,50 0,50
115-220-240V~ 50/60Hz
ø Blade ........................... mm 300 330 300 330
Rpm............................. r.p.m. 280 260 280 260
Slice thickness............... mm 0÷16 0÷16 0÷16 0÷16
Working cut: L x H ......... mm 270 x 210 260 x 220 260 x 210 260 x 220
Weight ........................... kg 36 37 34 35,5
Warranty: 2 years - Excluding the electrical parts
* All the versions are equipped with a ventilated motor.
mod. “TS-VL”
mod. “TC-VL”
MAIN TECHNICAL DATA

18
E
D
B
C
A
B
E
D
A
C
F350 TS-VL F370 TS-VL F350 TC-VL F370 TC-VL
A mm 420 420 420 420
B mm 630 630 630 630
C mm 650 650 680 680
D mm 920 920 920 920
E mm 660 660 670 670
EN
MAIN TECHNICAL DATA
TECHNICAL SPECIFICATIONS
Single-phase motor* ...... HP 0,50 0,50 0,50 0,50
115-220-230-240-400V~ 50/60Hz
ø Blade ........................... mm 350 370 350 370
Rpm............................. r.p.m. 260 260 260 260
Slice thickness............... mm 0÷16 0÷16 0÷16 0÷16
Working cut: L x H ......... mm 330 x 250 330 x 260 360 x 250 360 x 260
Weight ........................... kg 43,5 44,5 43 44
Warranty: 2 years - Excluding the electrical parts
* Ventilated motor (also version 230/400V~ 50/60Hz)
mod. “TS-VL”
mod. “TC-VL”