fantastic furniture Hamilton Bookcase 5 Shelf User manual

Version 1.0
Hamilton
Bookcase 5 Shelf
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Recommended weight capacity : 25kgs /Shelf.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
4 x Shelf Panels (P4);
Bottom Panel (P5);
5 x Back Panels (P6);
2 x Rails (P7);
Hardware pack
Top Panel
(P1)
Bottom Panel
(P5)
Shelf Panel
(P4)
Shelf Panel
(P4)
Shelf Panel
(P4)
Shelf Panel
(P4)
Right Side
Panel (P3)
Left Side
Panel (P2)
Rail
(P7)
Rail
(P7)
5 x Back
Panels
(P6)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Page 4
fantasticfurniture.com.au
DO NOT USE
20 x Dowels
(H1)
4 x Long
Screws
(H2)
28 x Cam Bolts
(H3)
28 x Cam Nuts
(H4)
1 x Screw
(H8)
1 x Safety Strap
(H7)
2 x Washers
(H9)
8 x Wedges
(H5)
8 x Screws
(H6)

(P1)
(P2)
(P3)
You will need
Step 1
Step 2
You will need
Phillips Head
Screwdriver
Phillips Head
Screwdriver
24 x Cam Bolts
(H3)
Attach 4 x Cam Bolts (H3) to Top Panel (P1) by tightening with the Phillips Head Screwdriver.
Attach 24 x Cam Bolts (H3) to Left & Right Side Panels (P2&P3) by tightening with the
Phillips Head Screwdriver.
fantasticfurniture.com.au Page 5
H3
H3
H3
H3
H3
H3
4 x Cam Bolts
(H3)

You will need
Step 3
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Step 4
You will need
Secure Rail (P7) to Bottom Panel (P5) with 2 x Long Screws (H2) by tightening with the
Phillips Head Screwdriver.
Insert 10 x Dowels (H1) into Left Side Panel (P2). Insert 12 x Cam Nuts (H4) into Shelf
Panels, Rails & Bottom Panel (P4x4&P7x2&P5). Rotate the cam nuts so the arrows point
towards the incoming bolts. Attach Shelf Panel, Rails & Bottom Panel
(P4x4&P7x2&P5) to Left Side Panel (P2) by tightening all cam nuts with the
Phillips Head Screwdriver.
Phillips Head
Screwdriver
12 x Cam Nuts
(H4)
Phillips Head
Screwdriver
(P7)
(P7)
(P7)
(P4)
(P4)
(P4)
(P4)
(P5)
(P2)
(P5)
fantasticfurniture.com.au
fantasticfurniture.com.au Page 6
H2
H4
H4
H4
H4
H1
H1
H1 H4
H1 H4
H1
H2
2 x Long
Screws (H2)
Countersink
face bottom
Countersink
face bottom
10 x Dowels
(H1)

Slide Back Panels (P6x4) into the grooves of Shelf Panels &
Bottom Panel (P4x4 & P5) as shown.
Insert 10 x Dowels (H1) into Shelf
Panels (P4x4) and Bottom Panel (P5).
Insert 12 x Cam Nuts (H4) into Shelf Panels,
Rails & Bottom Panel (P4x4&P7x2&P5). Rotate the
cam nuts so the arrows point towards the incoming bolts.
Attach Shelf Panels, Rails & Bottom Panel (P4x4&P7x2&P5)
to Right Side Panel (P3) by tightening all cam nuts with the
Phillips Head Screwdriver.
You will need
Phillips Head
Screwdriver
Step 6
Step 5
(P5)
(P3)
(P7)
(P4)
(P4)
(P4)
(P4)
(P5)
(P6)
(P6)
(P6)
(P6)
(P4)
(P4)
(P4)
(P4)
fantasticfurniture.com.au Page 7
H4
H4
H4
H1
H1
H4
H1
H4
H1
H4
H1
12 x Cam Nuts
(H4)
10 x Dowels
(H1)

Step 7
Gently stand the unit upright. Slide Back Panel (P6) into the grooves of the Left &
Right Side Panels (P2 & P3).
You will need
Step 8
Phillips Head
Screwdriver
Insert 4 x Cam Nuts (H4) into Left & Right
Side Panels (P2 & P3) as shown. Rotate the
cam nuts so the arrows point towards the
incoming bolts. Attach Top Panel (P1) to
Left & Right Side Panels (P2 & P3) by
tightening all cam nuts with the Phillips
Head Screwdriver. Secure Rail (P7) to Top
Panel (P1) with 2 x Long Screws (H2) by
tightening with the Phillips Head Screwdriver.
(P3)
(P3)
(P7)
(P7)
(P2)
(P2)
(P1)
(P6)
H2
H2
H4
fantasticfurniture.com.au Page 8
2 x Long
Screws (H2)
H2
H4
4 x Cam Nuts
(H4)

Move the bookcase to the
final position, and attach the
safety strap to the wall
securely. Make sure it is
firmly attached and snug fit.
Secure Back Panels (P6 x 2) in place as shown with 8 x Wedges (H5) using 8 x Wedge
Screws (H6) by tightening with the Phillips Head Screwdriver. Use 1 x Safety Strap
Screw (H8) and 1 x Washer (H9) to attach 1 x Safety Strap (H7) to Top Panel (P1).
Step 9
You will need
Phillips Head
Screwdriver
1 x Safety
Strap (H7)
1 x Safety Strap
Screw (H8)
1 x Washer
(H9)
8 x Wedges
(H5)
8 x Wedge
Screws (H6)
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
You will need
Step 10
Phillips Head
Screwdriver
1 x Washer
(H9)
Screw and Wall Plug
are not provided.
Please use appropriate
fixtures for your wall.
(P1)
(P6)
(P6)
fantasticfurniture.com.au Page 9
Screw
Wall
H7
H7
H9
H5
H6
H8
H8
H9
H9

Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
fantasticfurniture.com.au Page 10