fantastic furniture TORONTO User manual

Ver sion 1. 2
fantasticfurniture.com.au
Toronto
Bookcase 2 Drawer

Secure it!
Wall attachment guide
For plasterboard
(with available wood stud)
Securing method:
Screw inserted directly into
stud.
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY
OR DEATH.
To avoid any serious or fatal injury, a wall strap has been provided with this
product to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are not
included since different surface materials require different attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
To reduce the risk of furniture tipover:
•Do not allow children to stand, climb or hang on furniture. It may topple
and cause serious injury or death.
•Do not place toys or other child appealing items on top of this furniture,
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
•Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
•Avoid putting a TV on this product.
Reduce the risk of furniture
tip-over accidents
NOTE: Recommended weight capacity 40kgs/shelf
Page 2
For plasterboard
(without available wood stud)
Securing method:
Self drilling plasterboard
anchor.
For masonry wall
Securing method:
Solid wall: Plug with screw
Hollow wall: Spring toggle
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.

Useful Information
fantasticfurniture.com.au
Make sure you have all the required tools.
Never use power tools unless instructed.
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly. Unless instructed, do not fully tighten screws
until the item is fully assembled.
Assembly checklist
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3

Parts list:
Bookcase
Bookcase
Other tools you need :
Mallet
What you need
to assemble the product
(H1)
4 x Gliders
Hardware pack
Please make sure you have all these parts before you start.
Page 4
fantasticfurniture.com.au

Gently place the bookcase on it's back. Use the mallet to
hammer 4 x Gliders (H1) into the bottom of each leg as shown.
Ensure that the glides are placed in the middle of the leg before securing.
Step 1
4 x Gliders
(H1)
You will need
Mallet
(H1)
(H1)
(H1)
fantasticfurniture.com.au
Page 5
(H1)

Gently stand the bookcase upright and move to it's final position.
Attach the safety strap to the wall securely. Screw, washer & wall plug
are not provided. Please use appropriate fixtures for your wall.
We strongly advise that you use
the wall safety strap provided
to prevent the unit toppling
Seek advice from a qualified
trades person on how to
attach safety strap to the wall.
Page 6
Job Complete !
In the interest of our environment
please dispose of all packing thoughtfully.
fantasticfurniture.com.au
Step 2