fantastic furniture Lunar User manual

Lunar
Bed Single
Version 1.0
fantasticfurniture.com.au
o eole
euired

Looks like you've found
your Fantastic!
We're thrilled you've chosen Fantastic Furniture
to help create a home you'll love!
Page 2
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
fantasticfurniture.com.au

Assembly checklist
Read through the instructions carefully
before you begin. Make sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the
components before you begin assembly. Unless instructed, do not fully tighten
screws until the item is fully assembled.
Useful Information
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasterners. Check the product care label or
website for product care instructions.
! If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
fantasticfurniture.com.au Page 3

4 x Barrel Nuts
(H1)
1 x Allen Key
(H7)
4 x Long Bolts
M6x50mm
(H2)
11 x Wood Dowels
M8x30mm
(H3)
8 x Cam Nuts
15mm
(H5)
8 x Cam Bolts
(H6)
8 x Short Bolts
(H8)
6 x Feet
Glides (H9)
What you need
to assemble the product
Other tools you need
Phillips head screwdriver, soft headed
mallet.
Parts list
Box 1:
Centre Support (P5);
Side Rail L (P3);
Side Rail R (P4).
Hardware.
Box 2:
Head Board (P1);
Foot Board (P2);
1 x Mattress Base Panel (P6).
Box 3:
5 x Mattress Base Panels (P6).
20 x Short Screws
M4x30mm
(H4)
4 x Solid Wood
Blocks (H10)
fantasticfurniture.com.au Page 4
Head Board
(P1)
Foot Board
(P2)
Centre Support
(P5)
Side Rail L
(P3)
Side Rail R
(P4)
Mattress
Base Panel
(P6)

8 x Cam Bolts
(H6)
4 x Barrel Nuts
(H1)
8 x Cam Nuts
15mm (H5)
- Insert 4 x barrel nuts (H1) into panels (P3) & (P4).
- Insert 8 x cam nuts (H5) into panels (P3), (P4) & (P5).
- Screw 8 x cam bolts (H6) into panels (P1) & (P2) by using a phillips head screwdriver.
- Insert 11 x wood dowels (H3) into panels (P3), (P4) & (P5) by hand or gently using
a soft headed mallet.
- Fix 6 x feet glides (H9) into panels (P1), (P2) & (P5) as shown by hand or by
using a soft headed mallet. Position the feet glides so they are 50mm from
each bottom corner of the panel as shown.
11 x Wood Dowels
M8x30mm (H3)
Soft Headed
Mallet
H6 H6
H1
H1
H6
H5
H5
H6
H3
6 x Feet Glides
(H9)
H9
H9
H9
H9
P1
P3
P4
P5
P2
Step 2
Step 1
P2
P1
P5
fantasticfurniture.com.au Page 5
You will need
You will need
Phillips Head
Screwdriver
H6
H6
H6
H6
H6
H5
H5
H5
H5
H5
H5
H1
H1
H3
H3
H3
H9
H9
P3
P4
H3
H3
H3
H3
H3
H3
H3
H3
H1
Ensure the barrel
nut is facing the
right way up

4 x Long Bolts
M6x50mm (H2)
1 x Allen Key
(H7)
- Secure the head board (P1) to the side rails (P3) & (P4) with 4 x long bolts (H2) using an allen
key (H7).
Step 3
Step 4
H7
H2
H2
H2
H2
P1
P3
P4
4 x Short Bolts
(H8)
P1
P3
P4
H8
H8
- Attach centre support (P5) to head board (P1).
- Align holes and turn the cam nuts on centre support (P5) clockwise with a
phillips head screwdriver to lock in position.
- To secure the side rails (P3) & (P4) to the head board (P1), insert 4 x short
bolts (H8) and tighten with a phillips head screwdriver.
P5
fantasticfurniture.com.au Page 6
You will need
You will need
Phillips Head
Screwdriver
This is how a cam nut works...
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Two People
euired
H2
Ensure slot is facing incoming bolt

Step 5
Step 6
You will need
- Attach foot board (P2) to panels (P3), (P4) & (P5).
- Align all the holes and turn the cam nuts on panels (P3), (P4) & (P5) clockwise with a
phillips head screwdriver.
P2
P4
P5
P3
This is how a cam nut works...
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
4 x Short Bolts
(H8)
You will need
- Insert 4 x short bolts (H8) to foot board (P2) and tighten with a phillips head
screwdriver.
fantasticfurniture.com.au Page 7
Phillips Head
Screwdriver
H8
H8
P2
P3
P4
Phillips Head
Screwdriver
Two People
euired

Step 7
Step 8
- Attach 2 x wood blocks (H10) to the head board (P1) with 4 x short screws (H4) by using a
phillips head screwdriver as shown. Assemble blocks on either side of the centre support (P5).
P1
P2
You will need
fantasticfurniture.com.au Page 8
4 x Short Screws
M4x30mm (H4)
2 x Solid Wood
Blocks (H10)
You will need
4 x Short Screws
M4x30mm (H4)
2 x Solid Wood
Blocks (H10)
H10
H10
- Attach 2 x wood blocks (H10) to foot board (P2) with 4 x short screws (H4) by
a using phillips head screwdriver as shown. Assemble blocks on either side of
the centre support (P5).
Phillips Head
Screwdriver
Phillips Head
Screwdriver
H10
H4
H4
H4 H10
H4
Right View
Left View
H10
H4
H4
H10 H4
H4
Right View
Left View
P1
P1
P2
P2
P5
P5

- Secure the 6 x mattress base panels (P6) with 12 x short screws (H4) by using a phillips head
screwdriver. Please note the gap dimensions in the above diagram.
Step 9
You will need
Phillips Head
Screwdriver
Slat Position
Gap 38mm ±
Job Complete!
In the interest of our environment please dispose of all packaging
thoughtfully.
P6
H4
fantasticfurniture.com.au Page 9
P6
P6
P6
P6
P6
P2
P1
Gap 38mm ±
Gap 38mm ±
Gap 38mm ±
Gap 38mm ±
P6
P6
P6
P6
P6
P6
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
H4
12 x Short Screws
M4x30mm (H4)