fantastic furniture Havana Queen MK2 User manual

Version 1.0
Havana
Bed Queen MK2 Light Oak
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Rail (P1);
Rail (P2);
Rail (P3);
Rail (P4);
2 x Back Panels (P5);
Rail (P6);
2 x Side Rails (P7);
2 x Side Covers (P8);
Centre Rail (P9);
3 x Support Legs (P10);
Rail (P11);
Rail (P12);
Rail (P13);
Rail (P14);
2 x Back Panels (P15);
Rail (P16);
11 x Slats (P17);
2 x Support Slats (P18)
Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips Head Screwdriver;
Hammer
Page 4
DO NOT USE
fantasticfurniture.com.au
Side Rail
(P7)
Side Cover
(P8)
Side Cover
(P8)
Side Rail
(P7)
Support Slats
(P18) Slats
(P17)
Rail
(P1)
Rail
(P11)
Rail
(P12)
Rail
(P13)
Rail
(P16)
Rail
(P14)
Rail
(P6)
Rail
(P2)
Back
Panel
(P5)
Back
Panel
(P15)
Back
Panel
(P15)
Back
Panel
(P5)
Rail
(P3)
Rail
(P4)
Centre Rail
(P9)
Support
Leg
(P10) Support
Leg
(P10) Support
Leg
(P10)
40 x Dowels
(H1)
12 x Cam
Nuts
(H4)
12 x Cam
Bolts
(H3)
30 x Screws
(H2)
16 x Threaded
Rods
(H6)
4 x Hexagonal
Bolts
(H7)
20 x Half
Round
Nuts
(H5)
20 x Large
Hexagonal
Nuts
(H8)
4 x Plastic
Glides
(H9)
5 x Bolts
(H10)
1 x Allen
Key
(H14)
1 x Spanner
(H17)
9 x Washers
(H16)
12 x Nuts
(H15)
1 x Large
Allen Key
(H11)
10 x Large
Hole
Stickers
(H18)
12 x Small Hole
Stickers
(H19)
2 x Hexagonal
Nuts
(H13)
3 x Adjusters
(H12)

You will need
Step 1
Step 2
You will need
Insert 6 x dowels (H1) into rail (P2). Attach rails (P3, P4, P6) to rail (P2) and secure
using 3 x half round nuts (H5) and 3 x large hexagonal nuts (H8), tightening
with spanner (H17).
(P1)
(P2)
(P2)
(P3)
(P3)
(P6)
(P4)
(P4)
fantasticfurniture.com.au Page 5
Insert 6 x nuts (H15) into the holes in rails (P1, P2, P3, P4). Ensure the lines in the nuts (H15) face
incoming threaded rods as shown in the image above. Attach 6 x threaded rods (H6) to
the 6 x nuts (H15) and hand tighten by turning clockwise.
H15
H6
H6
H6
H1
H1
H1
H1
H1
H1
H6
H15
H15
H15
H6
H15
H6
H15
6 x Nuts
(H15)
6 x Threaded
Rods (H6)
H17
H5
H8
1 x Spanner
(H17)
3 x Half Round
Nuts (H5)
3 x Large
Hexagonal Nuts
(H8)
6 x Dowels
(H1)
Ĝ
h

Step 3
(P3)
(P4)
(P3)
(P6)
(P6)
(P5)
(P5)
(P4)
(P1)
Slide 2 x back panels (P5) into the grooves of rails (P3, P4, P6).
You will need
Step 4
Insert 6 x dowels (H1) into rails (P3, P4, P6). Attach rail (P1) to rails (P3, P4, P6) and
secure using 3 x half round nuts (H5) and 3 x large hexagonal nuts (H8), tightening
with spanner (H17).
fantasticfurniture.com.au Page 6
H17
H5
H8
H1
H1
H1
H1
H1
H1
1 x Spanner
(H17)
3 x Half Round
Nuts (H5)
3 x Large
Hexagonal Nuts
(H8)
6 x Dowels
(H1)

(P11)
(P12)
(P12)
(P13)
(P13)
(P16)
(P14)
(P14)
fantasticfurniture.com.au Page 7
You will need
Step 5
Insert 6 x nuts (H15) into holes on rails (P11, P12, P13, P14). Ensure the lines on the nuts (H15) face
incoming threaded rods as shown in the image above. Attach 6 x threaded rods (H6) into
the 6 x nuts (H15) and hand tighten by turning clockwise.
You will need
Step 6
H17
H5
H8
Insert 6 x dowels (H1) into rail (P12). Attach rails (P13, P14, P16) to rail (P12) and secure
using 3 x half round nuts (H5) and 3 x large hexagonal nuts (H8), tightening with
spanner (H17).
H6
H6
H15
H15
H6
H15
H6
H15
H6
H6
H15
H15
6 x Nuts
(H15)
6 x Threaded
Rods (H6)
H1
H1
H1
H1
H1
H1
1 x Spanner
(H17)
3 x Half Round
Nuts (H5)
3 x Large
Hexagonal Nuts
(H8)
6 x Dowels
(H1)
Phillips Head
Screwdriver
Ĝ
h

(P11)
(P12)
(P12)
(P13)
(P13)
(P16)
(P16)
(P15)
(P15)
(P14)
(P14)
Step 7
fantasticfurniture.com.au Page 8
You will need
Step 8
Insert 6 x dowels (H1) into rails (P13, P14, P16). Attach rail (P11) to rails (P13, P14, P16)
and secure using 3 x half round nuts (H5) and 3 x large hexagonal nuts (H8),
tightening with spanner (H17).
Slide 2 x back panels (P15) into the grooves of rails (P13, P14, P16).
H17
H5
H8
H1
H1
H1
H1
H1
H1
1 x Spanner
(H17)
3 x Half Round
Nuts (H5)
3 x Large
Hexagonal Nuts
(H8)
6 x Dowels
(H1)

You will need
Step 9
You will need
Step 10
(P8)
(P8)
(P7)
fantasticfurniture.com.au Page 9
Attach 6 x cam bolts (H3) into 1 x side cover (P8), tightening with a phillips head
screwdriver. Insert 2 x dowels (H1) into the side cover (P8).
Insert 6 x cam nuts (H4) into the holes on the side rail (P7).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach the side rail (P7) to the side cover (P8), then tighten the cam nuts with
a phillips head screwdriver. Repeat step 9 and step 10 for the other side cover (P8)
and side rail (P7).
Phillips Head
Screwdriver
12 x Cam
Bolts (H3)
Phillips Head
Screwdriver
H3
H3
H3
H3
H3
H4
H4
H4
H4
H4
H4
H3
4 x Dowels
(H1)
12 x Cam
Nuts (H4)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
x2
H1
H1
x2

fantasticfurniture.com.au Page 10
You will need
Step 11
(P13)
You will need
Step 12 (P13)
(P14)
(P7)
(P7)
(P8)
(P8)
Attach 4 x threaded rods (H6) into rails (P13, P14). Attach 2 x plastic glides (H9) to the
end of rails (P13, P14) by gently tapping with a hammer. Attach 6 x small hole stickers (H19)
to the holes of rails (P11, P12, P13, P14).
Insert 6 x dowels (H1) into 2 x side covers (P8) and 2 x side rails (P7). Attach rails (P13, P14)
to 2 x side covers (P8) and 2 x side rails (P7) and secure using 4 x large hexagonal nuts (H8)
and 4 x half round nuts (H5), tightening with the spanner (H17).
4 x Half Round
Nuts (H5)
4 x Large
Hexagonal Nuts
(H8)
1 x Spanner
(H17)
6 x Dowels
(H1)
H17
H5
H8
2 x Plastic
Glides (H9)
Required
Two People
4 x Threaded
Rods (H6)
H6
H6
Hammer
Phillips Head
Screwdriver
H1
H1
(P14)
(P11)
(P12)
H9
H6 H6
H9
H17
H8
H5
6 x Small Hole
Stickers (H19)
H19
H19
H19
H19
H19
H19

You will need
Step 13
(P3)
(P4)
fantasticfurniture.com.au Page 11
Attach 2 x plastic glides (H9) to end of rails (P3, P4) by gently tapping with a hammer.
2 x Plastic
Glides (H9) Hammer
H9
H9
You will need
Step 14
(P7)
(P7)
(P8)
(P8)
(P3)
(P4)
Insert 6 x dowels (H1) into 2 x side covers (P8) and 2 x side rails (P7). Thread 4 x hexagonal
bolts (H7) through the 4 x washers (H16) and push the 4 x hexagonal bolts (H7) through rails
(P3, P4). Attach rails (P3, P4) to 2 x side covers (P8) and 2 x side rails (P7), secure using
4 x large hexagonal nuts (H8) and 4 x half round nuts (H5) with spanner (H17). Tighten
4 x hexagonal bolts (H7) with large allen key (H11).
1 x Large Allen
Key (H11)
4 x Half Round
Nuts (H5)
4 x Large
Hexagonal Nuts
(H8)
1 x Spanner
(H17)
6 x Dowels
(H1)
H17 H5
H8
H1
H11 H7
H7
H7
H7
H1
Required
Two People
4 xHexagonal
Bolts (H7)
4 x Washers
(H16)
H16
H16
H16
H16
H17
H8
H5

You will need
Step 16
You will need
Step 15
(P2)
(P10)
(P10)
(P10)
(P9)
(P9)
(P16)
fantasticfurniture.com.au Page 12
Attach the centre rail (P9) to the rails (P2, P16) using 4 x screws (H2).
Tighten with a phillips head screwdriver.
Attach the 3 x support legs (P10) to the centre rail (P9) using 3 x washers (H16)
and 3 x bolts (H10), tightening with the allen key (H14). Insert the 3 x adjusters (H12)
into the 3 x support legs (P10) and hand tighten by turning clockwise.
H2
H2
H2
H2
H12
H10
H16
H14
H12
H12
3 x Bolts
(H10)
1 x Allen
Key (H14)
3 x Adjusters
(H12)
4 x Screws
(H2)
Phillips Head
Screwdriver
H2
H2
3 x Washers
(H16)
H10
H16
H10
H16
(P7)
(P8)

You will need
Step 17
(P7)
(P7)
You will need
Step 18
(P17)
(P7)
(P7)
(P9)
(P18)
(P18)
Attach the 2 x support slats (P18) to the centre rail (P9) using
2 x bolts (H10), 2 x washers (H16) and 2 x hexagonal nuts (H13), tightening with the allen key (H14).
Attach the 2 x support slats (P18) to the 2 x side rails (P7) using 4 x screws (H2), tightening
with a phillips head screwdriver. Ensure the adjusters (H12) on the support legs (P10) are
retracted so they are not touching the floor. With assistance, move the bed into its final
position. Once the bed is in it’s final position extend the 3 x adjusters (H12) on the 3 x
support legs (P10) so they are level with the floor.
H14
H2
H2
H2
H2
H10
H10
H16
H16
H13
H13
Phillips Head
Screwdriver
1 x Allen
Key (H14)
2 x Bolts
(H10)
4 x Screws
(H2)
H10
H16
H13
2 x Hexagonal
Nuts (H13) 2 x Washers
(H16)
Required
Two People
fantasticfurniture.com.au Page 13
Attach the 11 x slats (P17) to the 2 x side rails (P7)
using 22 x screws (H2), tightening with a phillips
head screwdriver.
Phillips Head
Screwdriver
H2
H2
22 x Screws
(H2)

You will need
Step 19
fantasticfurniture.com.au Page 14
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
10 x Large Hole
Stickers (H18)
(P4)
(P3)
(P2)
(P1)
(P6)
H18
H19
(P12)
(P11)
H18
6 x Small Hole
Stickers (H19)
Cover the holes on rails (P2, P3, P4, P6, P11, P12) using 10 x large hole stickers (H18).
Cover the holes on rails (P1, P2, P3, P4) using 6 x small hole stickers (H19).