fantastic furniture Monaco Tallboy 4 Drawer User manual

www.fantasticfurniture.com.au
Version1.0
MONACO
Tallboy4Drawer
TWOPEOPLE
REQUIRED

PAGE2www.fantasticfurniture.com.au
Enjoy
Yourpurchasefrom
Australia'sBestValueFurnitureStore
Toavoidanyseriousorfatalinjury,thisproduct hasbeenfitted withawall bracket
toprevent toppling.Westronglyrecommendthat thisproductispermanentlyfixed
tothe wallorothersuitablesurface. Fixing devicesarenotincluded sincedifferent
surfacematerialsrequiredifferent attachments.Pleaseseekprofessional adviceif
you areindoubtof whatfixing devicetouse.
WARNING:ENSURETHEWALL BRACKETISATTACHED
TOAVOIDSERIOUSINJURY.

PAGE3www.fantasticfurniture.com.au
Useful Information
!Neveruse powertools unless specifically instructed. Theycan damage yourcomponentsor
hardware if used incorrectly.
!The most common mistakesmade during assembly are using the wrong hardware orgetting
componentsback to front.
!Always use a soft surface (such ascarpet orcardboard)when assembling yourproduct to
avoid scratching ordamaging the surface of the product.
!Bulky itemssuch aswardrobesand bunkbedsshould be assembled in the roomtheywill be
used in astheymaynot fit through a dooronce assembled.
!Neveruse anyglue until you are certain that the partsbelong together.
! Periodically check and re-tighten all fasteners. Check the product care labelorwebsite for
product care instructions.
!If you are having anydifficultiesassembling yourproduct, missing anyhardware or
componentsplease visit ourwebsite Help Centre forfurtherassistance.
Read through the instructionscarefully
beforeyou begin. Makesureyou haveall the required tools.
Neverusepowertoolsunless instructed.
Identifyand layout all of the components
beforeyou begin assembly. Unless instructed, do not fullytighten screws until the itemisfullyassembled.
Assemblychecklist

www.fantasticfurniture.com.au PAGE4
12 x Big CamBolt
(H1)
16 xSmall
CamBolt (H10)
12 xBigCamNut
(H2) 12 xBigWood Dowel (H4) 8x Small Wood
Dowel (H5) 16 xScrew
(H6)
25 xScrew
(H7) 32 xScrew (H8) 16 xSmall CamNut (H9) 4xMetalHandle (H11) 1xAllen Key (H12)
1xWall Bracket
(H13) 6xScrew
(H14) 6xBack Panel Connector(H15) 12 xBolt (H16) 8xSlide
(H17)
5xBolt
(H3)
TopPanel
(P1)
LeftSide
Panel (P3)
RightSide
Panel (P4)
Metal Bar(P14)
BottomPanel
(P2)
DrawerLeft Side
(P8)
DrawerBase
(P11)
DrawerBack
Panel (P10)
DrawerRight
Side (P9)
Leg (P15)
Leg (P15)
Leg (P15)
Leg (P15)
(P10) (P9)
(P8)
(P11) Drawer
Front(P7)
Upper
Back Panel
(P12)
Lower
Back Panel
(P13) Front Rail (P5)
Back Rail(P6)
Partlist
Box1: Front Rail (P5); Back Rail (P6); 4xDrawerLeft Side (P8);
4xDrawerRight Side (P9); 4xDrawerBack Panel (P10);
4xDrawerBase(P11); UpperBack Panel (P12);
LowerBack Panel (P13); Metal Bar(P14); 4xLeg (P15);
Hardware.
Box2: Top Panel (P1); BottomPanel (P2); Left Side Panel (P3);
Right Side Panel (P4); 4xDrawerFront (P7).
Whatyouneed
toassembletheproduct
Othertoolsyou need
Flat head screwdriver; Phillipshead
screwdriver; Mallet

Step 1
www.fantasticfurniture.com.au PAGE5
Step 2
4xBigCam
Bolt (H1)
1xScrew
(H7)
1xWall
Bracket (H13)
Phillipshead
screwdriver
Youwillneed
4xBigCam
Bolt (H1)
8xSlide
(H17)
2xBigWood
Dowel (H4)
Phillipshead
screwdriver
Youwillneed
12 xScrew
(H7)
Mallet
Screw 4xBig CamBolts(H1)
intoTop Panel (P1)asshown.
Fasten Wall Bracket (H13)on
Top Panel (P1)withScrew (H7).
DonotfullytightentheScrew(H7).
(P1)
(P3)
(P3)
Separatethe 8setsof Slide Runners (H17-2)and Slide Tracks (H17-1)
fromSlides(H17)byfollowing the stepsbelow:
Extend the Slide Runnerall the wayforward.
Press the plasticreleaseleverof the slide down and
pull the Slide Runner(H17-2)completelyout.
Insert 2xBig Wood Dowels(H4)intoLeft Side Panel (P3).
Screw 4xBig CamBolts(H1)intoLeft Side Panel (P3).
Attach4xthe Separated Slide Tracks (H17-1)onto
Left Side Panel (P3)with12 xScrews(H7).

Step 3
www.fantasticfurniture.com.au PAGE6
Step 4
4xBigCam
Bolt (H1)
4xSlide
Track (H17-1)
2xBigWood
Dowel (H4)
Phillipshead
screwdriver
Youwillneed
12 xScrew
(H7)
Mallet
8xBigWood
Dowel (H4)
Youwillneed
(P2)
(P6)
(P5)
(P4)
(P4)
Insert 2xBig Wood Dowels(H4)intoRight Side Panel (P4).
Screw 4xBig CamBolts(H1)intoRight Side Panel (P4).
Attach4xthe Separated Slide Tracks (H17-1)onto
Right Side Panel (P4)with12 xScrews(H7).
Insert 4xBig Wood Dowels(H4)intoBottomPanel (P2).
Insert 2xBig Wood Dowels(H4)intoFront Rail (P5).
Insert 2xBig Wood Dowels(H4)intoBack Rail (P6).
Mallet
(P4)

Step 5
www.fantasticfurniture.com.au PAGE7
Step 6
Youwillneed
Flathead
screwdriver
4xBigCam
Nut (H2) (P6)
(P5)
(P4)
(P2)
(P12)
(P13)
(P2)
(P4)
(P6)
Position BottomPanel (P2)overRight Side Panel (P4)sothat theirgroovesarealigned.
Fit BottomPanel (P2), Front Rail (P5)&Back Rail (P6)toRight Side Panel (P4).
Insert 4xBig CamNuts(H2)intoBack Rail (P6), Front Rail (P5)and Right Side Panel (P4)and turnlockwisetolock.
Slide LowerBack Panel (P13)&UpperBack Panel (P12)intogroovesasshown.
CutSlot
Thisishow acamnut works........
The headof the cam
boltgoesintothe open
mouthofthecamnut.
Youthenturnthe cam
nutsoittightensover
thebolt.

Step 7
www.fantasticfurniture.com.au PAGE8
Step 8
Allen Key
(H12)
12 xBolt
(H16)
Thisishow acamnut works........
The headof the cam
boltgoesintothe open
mouthofthecamnut.
Youthenturnthe cam
nutsoittightensover
thebolt.
Youwillneed
Flathead
screwdriver
4xBigCam
Nut (H2)
Youwillneed
(P2)
Position Left Side Panel (P3)ontoBottomPanel (P2)&
Front Rail (P5)&Back Rail (P6).
If necessary, adjust the panelstoallow UpperBack Panel
(P12)&LowerBack Panel (P13)tofit intothe grooveof
Left Side Panel (P3)
Insert 4xBig CamNuts(H2)intoPanels(P2)&(P5)&(P6)
and turnclockwisetolock.
FixeachMetal Leg (P15)toBottomPanel (P2)with3xBolts(H16)
using Allen Key(H12).
(P15)
(P15)
(P15)
(P15)

Step 9
www.fantasticfurniture.com.au PAGE9
Step 10
Allen Key
(H12)
5xBolt
(H3)
Youwillneed
Youwillneed
Flathead
screwdriver
4xBigCam
Nut (H2)
Thisishow acamnut works........
The headof the cam
boltgoesintothe open
mouthofthecamnut.
Youthenturnthe cam
nutsoittightensover
thebolt.
(P14)
(P2)
(P1)
(P3)
(P12) (P4)
AttachMetal Bar(P14)ontoBottomPanel (P2)with5xBolts(H3)using Allen Key(H12).
Withhelp, carefullyturnthe assembled unit over.
Position Top Panel (P1)ontoSide Panel (P3)&(P4)
and UpperBack Panel (P12).
Insert 4xBig CamNuts(H2)intoSide Panels(P3)&(P4)and turnclockwisetolock.

Step 11
www.fantasticfurniture.com.au PAGE10
Step 12
6xPlastic
Fixture(H15) 6xScrew (H14)
Phillipshead
screwdriver
Youwillneed
Youwillneed
Phillipshead
screwdriver
(P12)
(P1)
(P13)
(P3)
(P1)
Westronglyadvisethat
youusethewallsafetyBracket
providedtopreventtheunit
toppling.
Seek advice fromaqualified
trades personon how to
attachthissafetyBracketto
yourspecificwall.
MovetheTallboytothefinalposition.
Mark fixing hole on walland removeTallboy.
Followtheinstructionsprovidedforthewallfittingsto
mountthefittingstothewall.
RepositionTallboyandfixthesafetyWallBracket(H13)tothewall.
Makesureit isfirmlyattached.
Fullytighten the screw (H7)on the Wall Bracket (H13)tothe
Top Panel(P1).
Screw and Wall Plug arenot provided.
Pleaseuseappropriatefixturesforyour
wall.
XX YY
H13
(P12)
(P1)
XX =YY
(P12)
If necessary, gentlyadjust the Top Panel (P1)sidewayin eitherdirection until XX and YY areequal.
Fixthe Back Panel Connectors (H15)withScrews(H14)asshown.
H7
H7