fantastic furniture Java Bed Queen User manual

Bed Queen
fantasticfurniture.com.au
Required
Two People
Version 1.0
Java

fantasticfurniture.com.au Page 2
Rattan
Rattan is a natural material that will respond to humidity in the
environment. Low humidity may cause the rattan to shrink.
High humidity may cause the rattan to absorb moisture and expand,
causing the weaving to look loose and wavy.
This is a natural phenomenon and not a defect.
Looks like you’ve found
your Fantastic!
Love it? Share it!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Fantastic buy! Share how it looks at home on Instagram
for your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
!The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
!Never use any glue until you are certain that the parts belong together.
!Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
!If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
!Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au Page 3

fantasticfurniture.com.au
Page 4
What you need
to assemble the product
Other tools you need
Phillips Head Screwdriver;
Mallet
Front Rail
(P1)
Part list
Carton 1:
2 x Side Rails (P2)
4 x Legs (P4)
4 x Brackets (P5)
1 x Centre Rail (P6)
1 x Centre Rail Support (P7)
3 x Support Legs (P8)
6 x Support Rails (P11)
Carton 2:
1 x Front Rail (P1)
1 x Footboard (P3)
1 x Set of Slats (P9)
1 x Headboard (P10).
Footboard
(P3)
Centre Rail
(P6)
Support
Leg (P8)
Slats (P9)
Side Rail
(P2)
Side Rail
(P2)
Leg (P4)
Bracket
(P5)
(P4)
(P5)
(P4)
(P8)
(P8)
Headboard (P10)
(P5)
(P5)
Support Rail
(P11)
(P4)
(P11)
(P11)
(P11)
(P11)
(P11)
Centre
Rail
Support
(P7)

fantasticfurniture.com.au
Page 5
Hardware Pack
42 x Bolts
16mm (H1)
6 x Bolts
40mm (H2)
4 x Felt Feet
(H3)
8 x Dowels
40mm (H5)
30 x Screws
25mm (H6)
12 x Small Flat
Washers (H7)
10 x Large Flat
Washers (H8)
12 x Small Spring
Washers (H9)
14 x Large Spring
Washers (H10)
14 x Large Nuts
(H12)
1 x Small
Allen Key (H13)
18 x Screws
38mm (H15)
1 x Wrench
(H16)
8 x Half Moon
Washers (H17)
4 x Bolts
75mm (H4)
1 x Large Allen Key
(H14)
4 x Bolts
70mm (H18)
12 x Bolts
65mm (H11)
12 x Dowels
20mm (H19)

Step 1
Page 6fantasticfurniture.com.au
You will need
12 x Dowels
20mm (H19)
Insert 12 x dowels (H19) into headboard (P10) as shown.
If needed use a mallet to gently tap the dowels into place.
Mallet
(P10)
H19
H19
H19
H19
H19
H19
H19
H19
H19
H19
H19
H19

Step 2
Page 7fantasticfurniture.com.au
You will need
18 x Screws
38mm (H15)
(P10)
(P11)
(P11)
(P11)
(P11)
(P11)
(P11) H15
H15
H15
Attach 6 x support rails (P11) onto headboard (P10) with 18 x screws (H15) as shown,
tightening with a phillips head screwdriver.
Phillips Head
Screwdriver

Step 3
Page 8fantasticfurniture.com.au
You will need
(P1)
(P11)
With assistance, attach 6 x support rails (P11) to front rail (P1) using 12 x bolts (H11),
12 x small spring washers (H9) and 12 x small flat washers (H7).
Fully tighten the bolts using small allen key (H13).
Required
Two People
12 x Bolts
65mm (H11)
12 x Small Flat
Washers (H7)
12 x Small Spring
Washers (H9)
1 x Small
Allen Key (H13)
H11
H11
H7
H7
H9
H9
(P1)
(P11)
(P11)
(P11)
(P11)
(P11)
(P11)

Step 4
Page 9fantasticfurniture.com.au
You will need
8 x Dowels
40mm (H5)
Insert 4 x dowels (H5) into each side rail (P2) as shown.
If needed use a mallet to gently tap the dowels into place.
Mallet
H5
(P2)
(P2)
H5
H5
H5
Step 5
You will need
4 x Bolts
70mm (H18)
(P3)
H18
H18
Screw 4 x bolts (H18) into footboard (P3) as shown.

Step 6
Page 10fantasticfurniture.com.au
You will need
4 x Half Moon
Washers (H17)
With assistance, align 2 x side rails (P2) to the front rail (P1), ensuring the holes on
the 2 x side rails (P2) are positioned towards the foot of the bed as shown.
Attach side rails (P2) onto front rail (P1) using 4 x bolts (H4), 4 x large flat washers (H8),
4 x half moon washers (H17), 4 x large spring washers (H10) and 4 x large nuts (H12).
Tighten with the large allen key (H14) and wrench (H16).
4 x Large Spring
Washers (H10)
4 x Large
Nuts (H12)
1 x Large
Allen Key (H14)
Required
Two People
(P2)
4 x Bolts
75mm (H4)
4 x Large Flat
Washers (H8)
1 x Wrench
(H16)
H4
H8
(P2)
(P1)
(P1)
H16
H17
H10
H12
H4
H4
H8
H8
(P2)
these holes at the bottom
H14

Step 7
Page 11fantasticfurniture.com.au
You will need
4 x Half Moon
Washers (H17)
With assistance, attach footboard (P3) to 2 x side rails (P2) using 4 x half moon washers (H17),
4 x large spring washers (H10) and 4 x large nuts (H12) as shown.
Tighten nuts (H12) using wrench (H16).
4 x Large Spring
Washers (H10)
4 x Large Nuts
(H12)
1 x Wrench
(H16)
Required
Two People
(P3)
(P2)
(P2)
(P3) (P2)
H17
H10
H12
H16
these holes at the bottom

Step 8
Page 12fantasticfurniture.com.au
You will need
12 x Bolts
16mm (H1)
Attach 1 x felt foot (H3) onto each leg (P4) as shown.
Attach bracket (P5) onto 4 x legs (P4) with 12 x bolts (H1) as shown.
Tighten using the small allen key (H13).
1 x Small
Allen Key (H13)
4 x Felt Feet
(H3)
(P4)
X4
H3
H1
H1
(P4)
(P4)
(P5)
(P5)

Step 9
Page 13fantasticfurniture.com.au
You will need
24 x Bolts
16mm (H1)
With assistance, carefully turn over the bed frame onto its side.
Attach 4 x brackets (P5) onto bed frame with 24 x bolts (H1) as shown.
Tighten using the small allen key (H13).
1 x Small
Allen Key (H13)
Required
Two People
(P2)
H1
(P1)
(P5)
(P4)
H1

Step 10
Page 14fantasticfurniture.com.au
You will need
6 x Bolts
40mm (H2)
Attach 3 x support legs (P8) onto centre rail (P6) with 2 x bolts (H2),
2 x large spring washers (H10), 2 x large flat washers (H8) and 2 x large nuts (H11) as shown.
Tighten using the large allen key (H14) and wrench (H16).
Attach centre rail support (P7) onto centre rail (P6) with 1 x bolt (H1),
and tighten using the small allen key (H13).
1 x Large
Allen Key (H14)
6 x Large Flat
Washers (H8)
1 x Wrench
(H16)
(P8)
6 x Large Spring
Washers (H10)
6 x Large
Nuts (H12)
(P6)
(P8)
H14
H2
H10
H8
H12
H16
(P8)
(P8)
(P6)
H2
H2
H2
(P7)
H1
2 x Bolts
16mm (H1)
(P7)
(P7)
(P6)
(P6)
H1
H1

Step 11
Page 15fantasticfurniture.com.au
You will need
5 x Bolts
16mm (H1)
With assistance, carfully turn the bed over onto its feet.
Attach centre rail (P6) and centre rail support (P7) to front rail (P1) using 3 x bolts (H1),
tightening with the small allen key (H13).
Attach centre rail (P6) to footboard (P3) using 2 x bolts (H1),
tightening with the small allen key (H13).
1 x Small
Allen Key (H13)
Required
Two People
(P1)
(P3)
(P6)
(P6)
(P1)
(P3)
(P7)
(P7)
H1
H1
H1
(P6)
(P1)
(P7) H1
H1
H1
H1
(P3)
(P6)
H1
H1

Step 12
Page 16fantasticfurniture.com.au
You will need
30 x Screws
25mm (H6)
Attach set of slats (P9) onto bed frame
with 30 x screws (H6) using a
phillips head screwdriver as shown.
If required, you may need to slightly push in
the 2 x side rails (P2) when attaching screws to
ensure the gap between the slats (P9) and side rails (P2)
are even.
Required
Two People
(P9)
Phillips Head
Screwdriver
H6
Push Push
(P2)
(P9)
(P2)
(P2)
(P2)
(P9)
H6

Step 13
Page 17fantasticfurniture.com.au
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.