fantastic furniture Avalon User manual

Version 1.0
fantasticfurniture.com.au
Av alon
Bedside 2 Drawer Whitewash

Secure it!
Wall attachment guide
For plasterboard
(with available wood stud)
Securing method:
Screw inserted directly into
stud.
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY OR DEATH.
To avoid any serious or fatal injury, a wall strap has been provided with this
product to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are not
included since different surface materials require different attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
To reduce the risk of furniture tipover:
• Do not allow children to stand, climb or hang on furniture. It may topple
and cause serious injury or death.
• Do not place toys or other child appealing items on top of this furniture,
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
• Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
• Avoid putting a TV on this product.
Reduce the risk of furniture
tip-over accidents
Page 2
For plasterboard
(without available wood stud)
Securing method:
Self drilling plasterboard
anchor.
For masonry wall
Securing method:
Solid wall: Plug with screw
Hollow wall: Spring toggle
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.
Recommended weight capacity : kg on Top
10kg/Drawer
20

Page 3
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.aufantasticfurniture.com.au

fantasticfurniture.com.au Page 4
Read through the instructions
carefully before you begin.
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screwsuntil the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
!Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
!Always use a so t surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
!Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
components please visit our website Help Centre for further assistance.
Assembly checklist
!Please see page 2 for any safety requirements or weight restrictions.
Useful information

1 x Washer
Page 5
fantasticfurniture.com.au
What You Need
to assemble the product
Hardware Pack :
(H2) (H3) (H4)
(H1) (H5)
8 x Cam Nuts 8 x Cam Bolts
(H6)
(H7)
12 x Dowels
(H8) Tracks (H9) Tracks (H11) (H12)
24 x Runner Screws 8 x Drawer Screws
(H13) (H14)
Other tools you need
Phillips Head screwdriver;Hammer
2 x CL Runner 2 x DL Runners
(H10)
2 x CR Runner 2 x DR Runners
2 x Handles 6 x Wedges 10 x Screws
Box 1:
4 x Feet (P2);
2 x Drawer Back Panels (P8);
2 x Drawer Side Panels (L) (P9);
2 x Drawer Side Panels (R) (P10);
2 x Drawer Base Panels (P11);
2 x Drawer Front Panels (P7);
Top Panel (P1);
Left Side Panel (P3);
Right Side Panel (P4);
Base Panel (P5);
Back Panel (P6);
P1
P2
P3
P4
P5
P6
P7
P8
P2
P2
P2
P9
P10
P11
1 x Allen Key
x Screws
8
( H15)
4 x Screws
(H16)
x2

Page 6
fantasticfurniture.com.aufantasticfurniture.com.au
Step 1
P3
P4
(H9)
(H11)
(H9)
(H11)
You will need
2 x CL Runner
Tracks (H9)
(H13)
Phillips Head
Screwdriver
2 x CR Runner
Tracks (H11)
12 x Runner
Screws
(H13)
(H13)
Step 2
P3
P4
(H7)
(H7)
(H7)
(H7)
8 x Dowels
(H7)
(H7)
(H7)
(H7)
(H7)
You will need
Insert 8 x Dowels (H7) into the Left Side Panel (P3) & Right Side Panel (P4).
Attached 2 x CL Runner Tracks (H9) to the Left Side Panel (P3) with 6 x Runner Screws (H13),
by tightening with a Phillips Head Screwdriver.
Repeat process to attach 2 x CR Runner Tracks (H11) to the Right Side Panel (P4).

Page 7
fantasticfurniture.com.au
Step 4
Step 3
P1
(H6) (H6)
(H6)
4 x Cam Bolts
Phillips Head
Screwdriver
You will need
(H5)
4 x Cam Nuts
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
Phillips Head
Screwdriver
You will need
(H6)
(H6)
(H6)
P1
(H5)
(H5)
(H5)
P4
P3
Insert 4 x Cam Nuts (H5) Left & Right Side Panel (P3 & P4) as shown. Rotate the Cam Nuts so
the arrow points towards the incoming Cam Bolts. Attach Top Panel (P1) to Left & Right Side
Panel (P3 & P4) by tightening all Cam Nuts (H5) with the Phillips Head Screwdriver.
Insert 4 x Cam Bolts (H6) into the Top Panel (P1), by tightening with a Phillips Head Screwdriver.

Page 8
fantasticfurniture.com.au
Step 5
Step 6
P1
P3
P4
P6
Raw side facing inside
Phillips Head
Screwdriver
You will need
4 x Screws
(H16)
(H16)
(H16)
(H16)
(H16)
P4
P3
P5
Attach Base Panel (P5) to Left & Right Side Panel (P3 & P4) with 4 x Screws (H16) by
tightening with the Phillips Head Screwdriver. Ensure that the Back Panel (P6) is slotted into
the grooves of Base Panel (P5).
Slide Back Panel (P6) into the grooves of Left & Right Side Panel (P3 & P4) and Top Panel (P1).

Page 9
Step 7
Step 8
You will need
P5
P2
P2
P2
P2
( H17)
1 x Allen Key
(H8)
x Screws
8
( H17) (H8)
(H8)
(H8)
(H8)
You will need
Phillips Head
Screwdriver
(H3) x 6
(H4) x 6
(H3) (H4)
6 x Wedges 6 x Screws P6
(H3)
(H3)
(H3)
(H3) (H3)
(H3)
(H4)(H4)
(H4)
(H4)
(H4)
(H4)
P4
Secure Back Panel (P6) in place with 6 x Wedges using 6 x Screws (H4) by tightening
with the Phillips Head Screwdriver.
fantasticfurniture.com.au
Attach 4 x Feet (P2) to Bottom Panel (P5) with 8 x Screws (H8) by tightening with
an Allen Key (H17).
( H17)
P2
(H8) (H8)

Page 10
Step 10
fantasticfurniture.com.au
Step 9
(H6)
(H6)
4 x Cam Bolts
(H6)
(H6)
You will need
Phillips Head
Screwdriver
(H7)
4 x Dowels
(H7)
(H7)
P7 x 2
Phillips Head
Screwdriver
You will need
4 x Cam Nuts
(H5)
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
(H5)
(H5)
P9 x 2
P10 x 2
P7 x 2
Insert 4 x Cam Nuts (H5) into the Drawer Side Panels (P9 & P10).
Rotate the Cam Nuts (H5) so the arrows point towards the incoming cam bolts.
Attach the Drawer Front Panel (P7) to the Drawer Side Panels (P9 & P10), by tightening Cam
Nuts with the Phillips Head Screwdriver.
Insert 4 x Dowels (H7) into the Drawer Front Panels (P7).
Insert 4 x Cam Bolts (H6) into the Drawer Front Panels (P7), by tightening with Phillips Head
Screwdriver.

Page 11
fantasticfurniture.com.au
Step 12
Step 11
P10
P11
P9
Raw side facing bottom
P7 x 2
(H14)
You will need
Phillips Head
Screwdriver
8 x Drawer
Screws (H14)
(H14)
(H14)
P10
P9
P8 x 2
Slot in the 2 x Drawer Base Panels (P11) into the grooves of panels (P9, P10 & P7) as shown.
Attach the Drawer Back Panels (P8) to the Drawer Side Panels (P9 & P10) with 8 x Drawer
Screws (H14), by tightening with a Phillips Head Screwdriver.
Before securing, ensure the Drawer Base Panel (P11) lines up with the grooves the whole way
around the drawer.

Page 12
fantasticfurniture.com.au
Step 13
Step 14
(H4)
4 x Screws
You will need
Phillips Head
Screwdriver
(H4)
(H4)
P7 x 2
(H1)
2 x Handles
(H1)
You will need
Phillips Head
Screwdriver
(H12)
(H13)
(H12)
(H10) (H13)
(H13)
(H13)
(H13)
P9
P10
(H13)
12 x Runner
Screws
2 x DL Runners
2 x DR Runners
(H10) (H13)
(H13)
Attached 1 x DL Runner (H12) to the bottom of the Drawer Side Panel L (P9) and 1 x DR
Runner (H10) to the bottom of Drawer Side Panel R (P10) with 6 x Runner Screws (H13) by
tightening with the Phillips Head Screwdriver. Repeat process for the remaining drawer.
Attach the 2 x Handles to the Drawer Fronts (P7) with 2 x Handle Screws (H4),
by tightening with a Phillips Head Screwdriver.

Step 16
Page 13
fantasticfurniture.com.au
1 x Washer
You will need
( H15)
( H15)
Screw and Wall Plug are not
provided. Please use
appropriate fixtures for
your wall.
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
Move the unit to the final position, and attach the safety strap to the wall securely.
Make sure it is firmly attached and snug fit.Ma
Job Complete!
P7
Step 15
P7
Insert the assembled drawers into the corresponding compartments as shown.
Ensure the drawers slide easily along the rails.
In the interest of our environment please dispose
of all packaging thoughtfully.