fantastic furniture Carrington User manual

Version 1.0
fantasticfurniture.com.au
Bed Queen
Carrington

fantasticfurniture.com.au Page 2Page 2
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

What you need
to assemble the product
Other tools you need:
Phillips head screwdriver
Headboard (P1)
Side Rail-R (P4)
Footboard (P2)
Centre Rail
(P7)
(P6)
Footboard Legs (P3)
Headboard and
Timber Cross Rail
(P8)
Footboard (P2) ; 4 x Headboard and Footboard Legs (P3) ;Side Rail-R (P4)
Headboard (P1) ; 32 x Slats (P11)
Parts list
Box 1 :
Box 2 :
Side Rail-L (P5) ; 2 x Support Legs (P6) ; Centre Rail (P7) ; Timber Cross Rail (P8) ;
32 x End Connectors (P9) ; 16 x Centre Connectors (P10) ; Hardware Pack.
32 x End Connectors (P9) 16 x Centre Connectors (P10) 32 x Slats (P11)
Hardware pack
fantasticfurniture.com.au Page 4
(H1)
(H6)
(H2) (H4)
(Felt Pad)
(H5)
(Big Head Bolts)
(Allen Key)
(Bolts) (Washers)
Footboard Legs (P3)
Headboard and
Side Rail-L (P5)
Support Legs
(P6) Support Legs
(H3)
(Screws)
4 x M8 x 18mm
1 x M5
10 x M8 x 20mm 2 x M4 x 32mm 6 x M8 x 19mm
1 x 40 x 20 x 3mm

(P3)
Step 1
Attach 2 x headboard legs (P3) to the bottom of the headboard (P1) and rotate clockwise
fantasticfurniture.com.au Page 5
Step 2
(P1)
(P2)
(P3)
to secure.
Attach 2 x fooboard legs (P3) to the bottom of the footboard (P2) and rotate clockwise
to secure.
(P3)
(P3)

Step 3
You will need
(H1) (H6)
Allen Key x M5
(P1)
(H2)
fantasticfurniture.com.au Page 6
4 x Bolts x 18mm
(P2)
(P4)
(P5)
(P4) (P5)
(P1)
(P2)
(P4)(P5)
(H1)
(H6)
(H6)
(H2)
4 x Bolts x 20mm
Insert 4 x bolts (H2) into the nuts of the headboard (P1) and install 4 x big head bolts (H1) to
the brackets of footboard (P2), and tighten two thirds of the way with the allen key (H6) as shown.
Attach 2 x side rails (P4/P5) to the headboard (P1) and footboard (P2) by slotting the bracket
on the side rails (P4/P5) over the bolts as shown. Do not fully tighten the bolts yet.
8mm
Headboard Footboard

(P7)
Step 4
(H2)
fantasticfurniture.com.au Page 7
(H4)
Step 5
(H6)
(H2) (P7)
2 x Washers x M8
(H4)
You will need
(H6)
Allen Key x M5
(H6)
(H4)
(P6)
(P1)
(P2)
(P5)
(P6)
Attach 2 x support legs (P6) to the centre rail (P7) as shown using 2 x bolts (H2) and 2 x
washers (H4), tightening with the allen key (H6).
there is a gap of 10mm between the bottom
Adjust the support legs (P6) so
of the legs and the floor.
Insert the centre rail (P7) between the headboard (P1) and footboard (P2) as shown.
Secure using 4 x bolts (H2) and 4 x washers (H4), tightening with the allen key (H6).
Do not fully tighten the bolts yet.
(P4)
(H2)
2 x Bolts x 20mm
4 x Washers x M8
(H4)
You will need
(H6)
Allen Key x M5
(H2)
4 x Bolts x 20mm

You will need
32 x End
Connectors
(P9)
16 x Centre
Connectors
(P10)
32 x Slats
(P11)
Step 6
1
(P9) (P10) (P9)
2
3
fantasticfurniture.com.au Page 8
(P11) (P11)
as shown.
Connect 2 x End Connectors (P9), 2 x slats (P11) and a Centre Connector (P10) together
Sometimes it makes it easier to line up the
holes if you press down in the middle of the
Insert the full slat into the side rails (P4/P5) and the centre rail (P7) by pressing down firmly.
(P1)
(P5)
(P4)
(P2)
(P7)
slat to flatten it out.

(H6)
(P8)
fantasticfurniture.com.au Page 9
Step 7
(H5)
(P8)
Make sure screws (H3)
are fully tightened.
You will need
(H6)
(H5)
Allen Key x M5
1 x Felt Pad
(H3)
2 x Screws x 32mm
Phillips head Screwdriver
(not provided)
4
Repeat for every bed slat until finished.
Ensure the inner space is square.
Attach the felt pad (H5) to the centre of the centre rail (P7) as shown. Secure the timber cross
fully with the Phillips Head Screwdriver.
rail (P8) into place in the centre of the side rails (P4/P5) using 2 x screws (H3), and tightening
You may now fully tighten all bolts on the headboard (P1), footboard (P2) and side
rails (P4/P5).
(H3)
(P7)
(H6)
1 x 40 x 20 x 3mm
(P1)
(P2)
(P5)
(P4)

Step 8
fantasticfurniture.com.au Page 10
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.