Fein DS 648 Quick start guide

SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessarytoper-formtheserepairs.Serviceorrepairsperformed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “AuthorizedWarranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
July10, 2004
Hand Drill
DS 648 / DSe 648

Fein Power Tools
DS 648 / DSE 648
Item Idem Number Description Reqd
10 3-19-02-022-00-7 MOTORHOUSING (DS648) 1
10 3-19-02-024-00-9 MOTORHOUSING (DSE648) 1
20 3-07-12-067-01-7 BRUSH HOLDER 2
40 4-30-41-001-99-4 SCREW 4
50 3-07-11-067-00-4 CARBON BRUSH 2
60 4-30-03-029-04-8 SCREW 2
70 5-1-213-001-11-9 FIELD COIL 1
90 4-30-01-004-04-2 SCREW 2
100 3-14-28-010-00-5 AIR CONDUCTING RING 1
120 3-07-01-073-00-5 REVERSING SWITCH 1
130 3-07-07-181-01-4 PROTECTION SLEVE (DS648) 1
130 3-14-13-090-00-3 PROTECTION SLEVE (DSE648) 1
145 3-07-05-035-01-3 CABLE 1
150 3-24-31-021-00-7 CABLE CLAMP 1
160 4-30-41-011-99-3 SCREW 2
170 3-07-22-057-00-2 CAPACITOR 1
180 4-30-03-013-99-1 SCREW 1
190 3-24-28-050-00-7 COVER (DS648) 1
190 3-24-28-052-00-9 COVER (DSE648) 1
200 4-30-66-003-99-6 SCREW 1
210 4-30-41-013-04-7 SCREW 3
220 3-07-62-006-01-1 SPEED CONTROL (DSE648) 1
230 3-09-04-038-00-6 SPRING (DSE648) 1
250 5-3-213-004-11-6 ARMATURE 1
290 3-10-04-010-00-3 FAN 1
360 3-15-06-173-00-3 INTER BEARING 1
370 3-15-08-125-00-8 GEAR HOUSING 1
390 3-34-01-064-00-8 DRILL SHAFT 1
400 4-17-01-218-02-4 BALL BEARING 608-RS1 1
410 3-05-01-223-00-7 SLEEVE 1
420 4-26-39-005-00-0 GASKET 1
430 4-17-01-213-01-1 BALL BEARING 608-RS1 1
440 3-36-13-067-00-1 GEAR WHEEL - 44T 1
450 3-26-18-032-00-6 THREADED RING 1
460 3-37-13-046-00-8 GEAR WHEEL - 16T 1
470 4-02-21-033-00-3 FITTING KEY 1
480 3-38-11-033-00-8 GEAR WHEEL - 31/23 T 1
490 4-26-16-036-00-4 SECURING RING 1
500 3-38-11-010-00-4 GEAR WHEEL - 10/18 T 1
510 3-36-57-033-00-8 GEAR WHEEL - 38 T 1
520 4-17-01-001-01-0 BALL BEARING 608-RS1 4
530 3-02-17-194-01-2 BOLT 1
550 3-01-09-058-00-7 SLIDING BUTTON 1
570 3-06-04-039-00-3 FELT GASKET 1
580 4-02-38-007-00-5 CLAMPING SLEEVE 1
590 3-02-16-079-00-8 BOLT 1
600 3-09-01-001-00-3 PRESSURE SPRING 1
610 4-30-10-015-06-4 THREADED PIN 1
700 4-30-35-091-05-3 SCREW 2
710 4-30-35-092-05-6 SCREW 2
720 4-24-43-004-05-7 LOCKING WASHER 4
730 3-26-12-060-00-9 PACKING RING 1
740 4-17-01-207-09-6 BALL BEARING 608-RS1 1
750 4-17-01-204-13-1 BALL BEARING 608-RS1 1
760 3-21-19-032-00-2 HANDLE 1
800 6-32-04-025-00-3 QUICK-ACTION CHUCK 1