FIBARO FGBHFS-101 User manual

FLOOD SENSOR
WATER LEAK & TEMPERATURE SENSOR
Quick Start Guide

3
Quick Start Guide,
Quick Manuals,
Warranty Terms
Device
Package Contents
Every Flood Sensor has a unique ID, the HomeKit Setup Code.
You will find the setup code on back cover of the Quick Start Guide.

4
FIBARO app
Download FIBARO application from the App Store.

5
First launch
Open the casing by turning
the cover counter-clockwise
Step 1
Take off the cover
Step 2
Close the cover by
turning it clockwise
Step 4Step 3
Remove the battery blocker and
check if the battery is placed correctly
Fig. 1 Fig. 2
Fig. 3 Fig. 4

6
Step 5
First launch
Open the FIBARO app
and tap Add accessory icon
Step 6
Application will guide you
through the pairing process
If you have already set up
another accessory tap icon +
!
Fig. 5

7
Resetting the Flood Sensor to factory defaults:
1. Open the cover
2. Press the button 3 times then press and hold the button
3. When the LED glows yellow, release the button
4. Click the button again immediately to confirm
Button
First launch
Electrodes
Place accessory on a surface prone to flooding
Step 7
After resetting the accessory
will blink red — it is ready
to be paired again.
!
Fig. 6
Fig. 7