Fisher-Price Classical Chorus Starlight Bassinet 79668 User manual

Classical Chorus™
Starlight Bassinet™
Model Number: 79668
Please keep this instruction sheet for future reference, as it contains important information.
Requires four “C” (LR14) alkaline batteries (not included) for soother operation
Adult assembly is required.
Tool needed for assembly: Phillips screwdriver.
Use only for a child who is unable to push up on hands and knees,
pull up or sit unassisted.
D
i
s
c
o
v
e
r
w
h
a
t
’
s
p
o
s
s
i
b
l
e
™
…
w
w
w
.
f
i
s
h
e
r
-
p
r
i
c
e
.
c
o
m

2
Occasionally a consumer may experience a problem with
one of our products. If this should happen, please call us
toll-free, rather than return this product to the store.
Usually, we can solve the problem over the telephone
or send you replacement parts.
Please call Fisher-Price® Consumer Relations, toll-free at
1-800-432-5437, 8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470.
Or, write to:
Fisher-Price® Consumer Relations
636 Girard Avenue
East Aurora, New York 14052
Consumer Information
Warnings
1
Failure to follow these warnings and
instructions could result in serious
injury or death.
To reduce the risk of Sudden Infant Death
Syndrome (SIDS), normal healthy infants
should always sleep on their backs unless
otherwise advised by a pediatrician.
• Infants can suffocate:
-In gaps between an extra pad and side
of the bassinet.
-On soft bedding.
• Never add a mattress, pillow, comforter or
padding. Use ONLY the pad provided by
the manufacturer.
• To prevent falls:
-Do not use this product when infant
begins to push up on hands and knees.
-Never place product on an
elevated surface.
-When used as an infant seat, always
use restraint.
• To prevent strangulation:
-Never place items with strings, such as
hood strings or pacifier cords, around a
child's neck.
-Never place product near a window
where cords from blinds or drapes can
strangle a child.
• Never leave child unattended.
• Attach the provided pad (with restraint
system) to this product. Never use this
product without pad provided.
WARNING
For other countries, outside the United States:
Canada: call 1-800-567-7724, or write to: Mattel Canada Inc.,
6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
Great Britain: telephone [phone].
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond,Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.

Parts
3
Bassinet
2 Base Tubes 2 Frames
M4 Shoulder Screw - 6
M4 Lock Nut - 6
(Inside Frame Curved Tube)
All Shown Actual Size

4
Assembly
1
Frame
Curved Tubes
Frame
Curved Tubes
Base Tubes
• Position the frames on a flat surface so that the curved
tubes face each other.
• Fit a base tube into the ends of each frame’s curved tube,
as shown.
• Align the holes in the base tube and curved tubes. Insert
an M4 screw through the hole in each end of the base
tube, the curved tubes and into the lock nut inside each
curved tube.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
• Repeat this procedure to assemble the other base tube
into each frame’s curved tube.
Hint: M4 lock nuts have been assembled to the curved tubes
at the factory. During shipment of this product, they may
have fallen out. Check to be sure there is a lock nut in each
hexagonal opening in the curved tubes. If one (or more) has
fallen out, fit the lock nut into the hexagonal opening in the
curved tube. Make sure the rounded side of the lock nut
is facing out.
Shown Actual Size
M4 Shoulder Screw - 4
M4 Lock Nut
(Inside Frame Curved Tube) - 2
Rounded
Side
IMPORTANT! Before each use or assembly, inspect this
product for damaged hardware, loose joints, missing parts
or sharp edges. DO NOT use if any parts are missing or
broken. Contact Fisher-Price® for replacement parts and
instructions if needed. Never substitute parts.
This package contains small parts
in its unassembled state.
Adult assembly is required.
CAUTION

5
Assembly
• Place palms on handles and grasp both sides of the base.
Pull the sides of the base out while pressing palms against
the handles. Let the base rotate down.
• Repeat this procedure to lower the other base.
Hint: If the base does not freely rotate down, pull the sides
of the base further outward while pressing palms against
the handles.
2
Bassinet
Tubes
Frame Short
Tubes
Press Button
• Position the frame assembly upright on a flat surface,
as shown.
• Fit the folded bassinet between the legs of the
frame assembly.
• While pressing the button on the frame short tube, fit the
bassinet tube over the frame short tube. Push the bassinet
tube down until the button on the frame short tube
“snaps” into place.
• Fit the other bassinet tube into the other frame short tube.
• Now, fit and secure the other bassinet tubes to the frame
short tubes on the other side of the product.
Hint: The tubes have been designed to fit together only one
way! If you cannot fit the bassinet tubes to the frame short
tubes, you will need to turn the folded bassinet around
and try again.
3
Base
Handle

Assembly
5
• With one side of
the assembly facing
you, fold back the
fabric and locate a
canopy retainer.
• Fit the canopy
retainer over the
frame tubes.
• Align the hole in the
canopy retainer and frame tubes
and insert an M4 screw through the front of the canopy
retainer, frame tubes and into the lock nut inside the
canopy retainer.
• Tighten the bolt with a Phillips screwdriver.
Do not over-tighten.
• Repeat this procedure to secure the other canopy retainer
to the other side of the frame, using the remaining M5 bolt.
Assembly is now complete.
Canopy
Retainer
Frame Tube
Hint: An M4 lock nut has been assembled to each canopy
retainer at the factory. During shipment of this product, they
may have fallen out. Check to be sure there is a lock nut in
each hexagonal opening in the canopy retainers. If one
(or both) has fallen out, fit the lock nut into the hexagonal
opening in the canopy retainers. Make sure the rounded side
of the lock nut is facing out.
Shown Actual Size
M4 Shoulder Screw - 2
M4 Lock Nut
(Inside Canopy Retainer)
Rounded
Side
Frame Tube
4
• Lift the assembly so that each side of the base “snaps”
into place.
• Open the ends of the bassinet.
6

7
Battery Installation Battery Tips
• Remove the batteries during long periods of non-use.
Always remove exhausted batteries from the product.
Battery leakage and corrosion can damage this product.
Dispose of the batteries safely.
• Do not dispose of batteries in a fire.The batteries may
expolode or leak.
• Never short circuit the battery terminals.
• Non-rechargeable battereries are not to be recharged.
• Only batteries of the same or equivalent type as recom-
mended in the Battery Installation instructions are to
be used.
• If removable rechargeable batteries are used, they are only
to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy
before they are charged.
• If you use a battery charger, it should be examined regularly
for damage to the cord, plug, enclosure and other parts.
Do not use a damaged battery charger until it has been
properly repaired.
• We recommend the use of alkaline batteries for longer
battery life.
1.5V x 4
"C" (LR14)
Shown Actual Size
• Loosen the screw in the soother battery compartment door.
• Remove the battery compartment door.
• Insert four "C" alkaline (LR14) batteries as indicated inside
the battery compartment.
• Replace the battery compartment door and tighten the
screw with a Phillips screwdriver. Do not over-tighten.

8
Set-Up & Use
To Open
IMPORTANT! Before each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. Do not use
if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts.
Failure to follow these warnings
and instructions could result in
serious injury or death.
• To prevent falls:
- Never place product on an elevated
surface.
• To prevent strangulation:
-Never place items with a string, such as
hood strings or pacifier cords, around
child's neck.
-Never place product near a window
where cords from blinds or drapes can
strangle a child.
WARNING
• Place palms on handles and grasp both sides of the base.
Pull the sides of the base out while pressing palms against
the handles. Let the base rotate down.
• Repeat this procedure to lower the other base.
Hint: If the base does not freely rotate down, pull the sides
of the base further outward while pressing palms against
the handles.
1
Base
Handle

9
Set-Up & Use
2
• Lift the bassinet so that each side of the base “snaps”
into place.
• Lower the ends of the bassinet.
• Push down on each end of the bassinet to be sure the
frame is secure.
3

10
Set-Up & Use
• Place your baby in the bassinet.
• Position the restraint pad between your baby's legs.
• Fasten both waist belts to the buckles on each side
of the restraint pad. Make sure you hear a "click" on
both sides.
• Check to be sure the restraint is securely attached by
pulling it away from your baby. The restraint should
remain attached.
4
Buckle
Waist Belt
Restraint
Pad
Restraint System
Failure to follow these warnings
and instructions could result in
serious injury or death.
To reduce the risk of Sudden Infant Death
Syndrome (SIDS), normal healthy infants
should always sleep on their backs unless
otherwise advised by a pediatrician.
• Infants can suffocate:
-In gaps between an extra pad and side
of the bassinet.
-On soft bedding.
• Never add a mattress, pillow, comforter or
padding. Use ONLY the pad provided by
the manufacturer.
• To prevent falls:
- Do not use this product when infant
begins to push up on hands and knees.
- When used as an infant seat, always
use restraint.
• Never leave child unattended.
WARNING
When Putting Baby to Sleep*
•NEVER place any covering higher than an infant’s shoulders.
•NEVER place infants to sleep on pillows, sofa cushions,
adult beds, waterbeds, beanbags, or any other surface not
specifically designed for infant sleep.
• Do not overdress your baby. If you feel comfortable, your
baby will too.
*This important safety message is brought to you by the Juvenile Products
Manufacturers Association.