Fisher-Price 3-IN-1 HIGH CHAIR TO BOOSTER P5369 User manual

3-in-1 High Chair to Booster™
Model Number P5369 and P6028
Installation Instructions
FALL HAZARD
•Theseatcantipbackwardsandfallfromthehigh
chairframeifyouunlatchtheboosterreleasewith
yourchildinit.DO NOTusethisproductuntilyou
haveinstalledthebracketsonthehighchairframe.
•Theseatbackcandetachfromtheseatbottomif
itisnotcompletelysnappedinplace.DO NOTuse
thisproductuntilyouhaveproperlyinstalledtheseat
backtotheseatbottomandre-installedtherestraint
systemproperlyontheseat.
WARNING

2
IMPORTANT! Enclosed is a new seat back, left and right brackets and
extra fasteners for assembly. Please follow these instructions carefully.
Kit Parts
Tool needed for installation: Phillips Screwdriver (not included).
Instruction Sheet
#8 x 3/4" (1,9 cm) Screw - 2
(The screw is shown actual size.)
WARNING
Left and Right Brackets
Seat Back
This kit contains small parts in it's unassembled state.
Adult assembly is required.
CAUTION
3-in-1 High Chair to Booster™
Model Number P5369 and P6028
Installation Instructions
FALL HAZARD
•Theseatcantipbackwardsandfallfromthehigh
chair frame if you unlatch the booster release with
your child in it. DO NOT use this product until you
have installed the brackets on the high chair frame.
•Theseatbackcandetachfromtheseatbottomif
it is not completely snapped in place. DO NOT use
this product until you have properly installed the seat
back to the seat bottom and re-installed the restraint
system properly on the seat.
WARNING

3
Bracket Installation Instructions
AB
• REMOVE your child from the seat.
• While sliding the switch A, pull the latch toward
you B.
1
Latch
• Lift the seat off of the high chair frame.
• Set the seat aside for seat back installation.
2
Booster Seat
High Chair Frame
Left Bracket
Seat Support
Tube
Seat Support
4
• Turn the high chair frame over. Position it so that
the footrest is facing away from you.
• Remove the screws, furthest from the footrest, in
the seat support.
• First, fi t the slot on the left bracket (labeled 1) onto
the seat support tube closest to you A.
• Then, slide the left bracket completely onto the
seat support B.
Hint: The brackets are designed to t each side of
the seat support one way.
3
Remove
These Screws
BOTTOM VIEW
Footrest
B
A
Seat Support

4
Bracket Installation Instructions
Seat Support
•Pushtoaligntheholeintherightbracketwiththe
holeintheseatsupport.
•Inserta#8x3/4"(1,9cm)screw(providedin
thiskit)throughtherightbracketandintotheseat
support.TightenthescrewwithaPhillipsscrew-
driver.Donotover-tighten.
Bracket installation is now complete.
•Foryourconveniencethiskitincludesextrascrews
(justincaseyoumisplacethescrewsremovedin
step3).Ifafterassemblingthebracketsyouhave
extrascrews,disposeoftheminthegarbage.
78
Right Bracket
#8 x 3/4" (1,9 cm)
Screw
•Pushtoaligntheholeintheleftbracketwiththe
holeintheseatsupport.
•Inserta#8x3/4"(1,9cm)screw(providedin
thiskit)throughtheleftbracketandintotheseat
support.TightenthescrewwithaPhillipsscrew-
driver.Donotover-tighten.
5
#8 x 3/4" (1,9 cm)
Screw
Left Bracket
Seat Support
•First,ttheslotontherightbracket(labeled2)
ontotheseatsupporttubeclosesttoyouA.
•Then,slidetherightbracketcompletelyontothe
seatsupportB.
Hint: The brackets are designed to t each side of
the seat support one way.
6Right Bracket
Seat Support
Tube Seat Support
B
A

5
• From behind the seat, push the "T" ends of the
shoulder straps through the slots in the seat back.
1
• Pull the tab on the seat back. Lift to remove the
seat back from the seat.
2
"T" Ends of
Shoulder Straps
LIFT
PULL TAB
Shoulder Straps
Seat Back Installation Instructions
BACK VIEW
• From behind the seat back, unfasten the pad straps.
• Remove the seat back pad from the seat back.
• Set the seat back pad aside.
Seat Back Pad
Seat Back
Pad Straps
BACK VIEW
3
• Dispose of the seat back in the garbage.
4

6
BACK VIEW
•Fitthestrapsonthebackoftheseatbackpad
intothesmallslotsinthenewseatback.
•Presstofastenthepadstrapsandsecuretheseat
backpadtothenewseatback.
5
Seat Back Pad
Small Slots
Small Slots
New
Seat Back
Pad Straps
BACK VIEW
Smaller Baby
•Insertthe"T"endsoftheshoulderbeltsthrough
thelowerslotsinthepadandseatback.Pullon
theshoulderbeltstobesuretheyaresecure.
Larger Baby
•Insertthe"T"endsoftheshoulderbeltsthrough
theupperslotsinthepadandseatback.Pullon
theshoulderbeltstobesuretheyaresecure.
6
Upper Shoulder
Belt Slots
(Larger Baby)
Lower
Shoulder
Belt Slots
(Smaller Baby)
Shoulder Belt
"T" Ends
Seat Back Installation Instructions
•Atanangle,tthetabsonthenewseatbackinto
theslotsintheseatA.
•Pushtheseatbackto"snap"inplaceB.
IMPORTANT! Pull on the seat back to be sure it
is secure to the seat bottom. Seat back installa-
tion is now complete
7
Tab Tab
New Seat Back
Slot
Slot
•Turnthehighchairframeuprightandreplacethe
seatonthehighchairframe.
•Pushtheseattolockinplace.Youshouldhear
a"click".
8
A
A
B

7
United States
If you have further questions regarding the installation of the brackets or seat back,
please call Fisher-Price®Consumer Relations at 1-888-683-6224, 9 AM – 7 PM (EST)
Monday through Friday and 11 AM – 5 PM (EST) Saturday. Hearing-impaired
consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to
Fisher-Price®Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052.
Great Britain
Vanwall Business Park, Maidenhead SL6 4UB.
Helpline: 01628 500303. www.service.mattel.com/uk.
Consumer Information

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN U.S.A. P5369pr-0922