Fisher-Price Baby Smartronics Learn-a-Bot User manual

Instructions
Model Number: 71682
Please save these instructions for future reference.
Requires three “AA” batteries (included).
Adult assembly is required for battery replacement.
Tool required for battery replacement: Phillips screwdriver (not included).
™
™
71682pr-0920.qrk 11/30/00 1:44 PM Page 1

Battery Replacement
Battery Tips
Battery
Compartment Door
1.5V x 3
“AA” (LR6)
SHOWN ACTUAL SIZE
For best performance, we recommend that
you replace the batteries that came with this
toy with three, new alkaline batteries.
• Locate the battery compartment on the back of
the toy.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver.
• Lift to remove the battery compartment door.
2
• Do not mix old and new batteries.
• Do not mix different types of batteries:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries during long periods
of non-use. Always remove exhausted
batteries from the toy. Battery leakage and
corrosion can damage this toy. Dispose of
batteries safely.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be
recharged.
• Only batteries of the same or equivalent
type as recommended in the “Battery
Replacement” instructions are to be used.
• If removable rechargeable batteries are
used, they are only to be charged under
adult supervision.
• Rechargeable batteries are to be removed
from the toy before they are charged.
• If you use a battery charger, it should be
examined regularly for damage to the cord,
plug, enclosure and other parts. Do not use
a damaged battery charger until it has
been properly repaired.
• Remove the exhausted batteries and prop-
erly discard them.
• Insert three “AA” (LR6) alkaline batteries,
as indicated inside the battery compartment.
Hint: We recommend using alkaline batteries
for longer battery life.
• Replace the battery compartment door and
tighten the screw with a Phillips screwdriver.
Do not over-tighten.
• When sounds or lights from this toy become
faint or stop working, it’s time for an adult to
replace the batteries!
Back View
71682pr-0920.qrk 11/30/00 1:44 PM Page 2

• Learn-a-Bot™has two learning modes: Slide the
mode switch to either: letters mode ;or num-
bers mode .
• To turn power off, slide the mode switch to off .
Learn-a-Bot™
•To learn letters, slide the mode switch to
.Learn-a-Bot greets your child and invites
your child to play and learn.
• Give the Learn-a-Bot a push and it sings the
alphabet song, while showing various letters
on it’s display screen.
• Press the learning button on top of Learn-a-
Bot’s head to hear the name of the letter dis-
played, and a word that begins with that letter.
• Press the learning button again to hear and
see another letter.
Letters Mode
3
•To learn numbers, slide the mode switch to
. Learn-a-Bot greets your child and invites
your child to play and learn.
• Give the Learn-a-Bot a push and it sings a
counting song, while showing various numbers
on it’s display screen.
• Press the learning button on top of Learn-a-
Bot’s head to hear the number displayed, and
then see the number counted out on the dis-
play screen.
• Press the learning button again to hear and
see the another number.
Hint: If your child is not actively playing with this
toy, Learn-a-Bot will encourage your child to play.
If your child does not respond, the toy automati-
cally turns off (sleep mode).
Numbers Mode
Learning Button
Display
Screen
Mode Switch
Letters
Mode Numbers
Mode
Off
71682pr-0920.qrk 11/30/00 1:44 PM Page 3

If you have any questions about this product:
In Canada, call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
In Great Britain, telephone [phone].
In Australia, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer
Advisory Service 1-800-800-812 (valid only in Australia).
Care
• Wipe this toy with a clean cloth dampened
with a mild soap and water solution. Do not
immerse this toy.
• This toy has no consumer serviceable parts.
Please do not take this toy apart.
Note: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a resi-
dential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a par-
ticular installation. If this equipment does cause
harmful interference to radio or television recep-
tion, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
Fisher-Price®Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052.
FCC Note
(United States Only)
Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-KIDS, 8 AM – 6 PM EST Monday
through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call
1-800-382-7470. Or, write to:
Questions? We’d like to hear from you!
Fisher-Price, Inc., a subsidiary of Mattel, Inc.
East Aurora, New York 14052, U.S.A.
©2001 Mattel, Inc. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in China
71682pr-0920
Volume Switch
• Locate the volume switch on the back of the toy.
• Select low volume or high volume .
Back View
Adjusting the Volume
Low
Volume High
Volume
71682pr-0920.qrk 11/30/00 1:44 PM Page 4