Fisher-Price BFH57 User manual

fisher-price.com
BFH57
Please keep this instruction sheet for future reference,
as it contains important information.
Requires two AA (LR6) alkaline batteries (not included).
Adult assembly required.
Required tool: Phillips screwdriver (not included).
Wipe this toy with a clean, damp cloth. Do not immerse.
This toy has no consumer serviceable parts. Do not take apart.
IMPORTANT!
If you do not hear
music or sounds when
the blocks tumble to
the base, you may not
have assembled the
play wall to the bases
correctly. Please refer
back to the assembly
instructions, step 2.

2
©2014 Mattel. All Rights Reserved.
PRINTED IN CHINA BFH57a-0920
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
FCC Statement (United States Only)
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates uses
and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
NOTE: Changes or modifications not
expressively approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following
two conditions: (1) this device may not
cause interference, and (2) this device
must accept any interference, including
interference that may cause undesired
operation of the device.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l’utilisateur du dispositif doit être prêt
à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible
de compromettre le fonctionnement du
dispositif.

3
Battery Installation
1,5V x 2
AA (LR6)
For longer life, use
alkaline batteries.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver and remove the door.
• Insert two, new AA (LR6)
alkaline batteries.
• Replace the battery compartment door and
tighten the screw.
• If toy begins to operate erratically you may
need to reset the electronics. Slide the
power/volume switch off and then
back on.
• When sounds from this toy become faint
or stop, it’s time for an adult to change
the batteries.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.
Battery Safety Information
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your toy. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted
batteries from the toy. Dispose of batteries
safely. Do not dispose of the product in
a fire. The batteries inside may explode
or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
toy before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.

4
AssemblyAssembled Parts
• Place the bases on a hard, flat surface.
• “Snap” the bases together.
1
• “Snap” the play wall to the base assembly.
Hint: The play wall is designed to fit one
way. If it does not seem to fit, turn it around
and try again!
2
Bases
Play Wall
2 Bases
Play Wall
2 Guides Play Wall Top
3 Ramps
(Small, Medium, Large)
6 Pegs

5
• “Snap” all six pegs into the socket on the
play wall.
Assembly
• “Snap” the play wall top into the slots in
the play wall.
• At an angle, first insert and “snap” the
side tabs on the large ramp into the
play wall.
• Then, push to insert and “snap” the tab
on the bottom of the large ramp into the
slot in the base.
play
wal
l.
• “Snap” both guides into the slots in the
play wall.
Hint: The guides are designed to fit one
way. If either does not seem to fit, try
assembling to the other set of slots in the
play wall.
3
4
5
6
Peg
Play Wall Top
Large Ramp
Guides