Fisher-Price MIRACLES & MILESTONES K5520 User manual

1
K5520
www.fisher-price.com

2
FCC Statement
Visit us on line at www.service.fisher-price.com
Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-5437,
9 AM – 7 PM (EST) Monday through Friday and 11 AM – 7 PM (EST)
Saturday. Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470. Write to us at: Fisher-Price®pt Consumer
Relations, 636 Girard Avenue, East Aurora, New York 14052.
• If you will not use this product for an extended period of
time, we recommend turning power completely off. Simply
slide the power/volume control switch on the back of the
dashboard to off . Be sure to follow the set-up instructions,
and turn power back on for future use.
• If sounds or lights from this toy become faint or stop, it’s time
for an adult to replace the batteries!
For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB.
Helpline: 01628 500303. www.service.mattel.com/uk
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond,
Victoria 3121 Australia. Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City,
Tsimshatsui, HK, China.
(United States Only)
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Consult the dealer or an experienced radio/TV technician
for help.
Note: Changes or modifications not expressly approved by
the manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
WARNING
To prevent strangulation, never place
product in a crib or playpen where baby
could become entangled. NEVER add
strings or ties to the product.
Consumer Information
• Please keep this instruction sheet for future reference,
as it contains important information.
• Requires five “AA” (LR6) alkaline batteries (not included).
• Battery installation and set-up should be done by an adult.
• Tool required for battery installation: Phillips Screwdriver
(not included).

3
Battery Installation Battery Safety Information
Hint: We recommend alkaline batteries for longer
battery life.
Dashboard
• Turn the dashboard face down. Open the fasteners on the
cover to locate the battery compartment on the dashboard.
• Loosen the screws in the battery compartment door with a
Phillips screwdriver. Remove the battery compartment door.
• Insert three “AA” (LR6) alkaline batteries.
• Close the battery compartment door and tighten the screws
with a Phillips screwdriver. Do not over-tighten.
Remote Control
• Loosen the screws in the battery compartment door with a
Phillips screwdriver. Remove the battery compartment door.
• Insert two “AA” (LR6) alkaline batteries.
• Close the battery compartment door and tighten the screws
with a Phillips screwdriver. Do not over-tighten.
In exceptional circumstances, batteries may leak fluids that
can cause a chemical burn injury or ruin your product. To
avoid battery leakage:
• Do not mix old and new batteries or batteries of different
types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from the product. Dispose of
batteries safely. Do not dispose of this product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeablebatteries.
• Remove rechargeable batteries from the product
before charging.
• If removable, rechargeable batteries are used, they are
only to be charged under adult supervision.
• Protect the environment by not disposing of this
product with household waste (2002/96/EC).
Check your local authority for recycling advice and
facilities (Europe only).
1.5V x 5
“AA” (LR6)
SHOWN ACTUAL SIZE

4
Attaching the Dashboard
to a Car Seat
IMPORTANT! This product is designed to attach to most
car seats. If, after attaching this product to your car seat,
you find that you cannot properly tighten your car seat’s
restraint system (as described in the car seat manufacturer’s
instructions), DO NOT use this product on the car seat.
IMPORTANT! Before attaching the dashboard to your
car seat’s restraint system, check to be sure the car seat
restraint system is securing your child properly! Check
all restraint system belts (shoulder, lap, crotch, etc.) by
pulling on them. The straps should not pull more than
one inch (two fingers) away from your child.
• Position the dashboard with the flat edge towards baby.
• Wrap the dashboard straps around the crotch strap (of the
car seat restraint system) and fasten.
Car Seat
Restraint System
Hint: This toy does not fit tightly to your car seat restraint
system, so it does not interfere with securing your child in the
car seat.
Crotch
Strap
Flat Edge
Setup
• Slide the power/volume switch on with low volume .
The system is now active for approximately two hours.
• Press the “steering wheel” to hear a short song. Adjust the
volume to a comfortable listening level for your child by either:
- keep the switch on low volume .
- slide the switch to high volume .
• Close the fasteners on the cover.
Hint: If the toy is not used for more than two hours, it turns off
automatically. To reactivate the toy, simply press the
“steering wheel”.
Power/
Volume
Switch
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. K5520pr-0920
© 2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA

5
• Slide the power/volume control switch to high or low volume
to activate the system.
• Press the remote control button to start or stop lights
and music.
• Baby can also press the “steering wheel” for a sound effect
and a short tune along with twinkling lights.
Attach the Remote Control
to a Vehicle Visor
• Attach the remote control clip to the top of the vehicle visor.
Hint: The remote control does not need to be in direct line
with dashboard.
Visor
Remote
Control
The dashboard can be used in two ways: Adult
activated by remote control or child activated by
pressing on the steering wheel.
Activating Sound and Lights