Fisher-Price CGN65 User manual

1
CGN65
fisher-price.com
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three AA (LR6) alkaline batteries (not included).
Adult assembly is required. Tool required: Phillips screwdriver (not included).
Doll sold separately.

2
Consumer Information
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.This
equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.However, there is no
guarantee that interference will not occur
in a particular installation.If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
NOTE: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
©2015 Mattel. All Rights Reserved.
PRINTED IN CHINA CGN65_1100655373_DOM
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept
any interference, including interference that
may cause undesired operation of the device.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes : (1) il ne
doit pas produire de brouillage et (2) il doit
pouvoir tolérer tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de
compromettre son fonctionnement.

3
Assembled Parts
CAUTION
This package contains small
parts. For adult assembly only.
2 Frames
Front Brace
Handle
Back Brace
Seat
Toy Bar
TB
#6 x ½” Screw – 13
SHOWN ACTUAL SIZE
Tighten all screws with a Phillips
screwdriver. Do not over-tighten.

4
Assembly
13
4
2
• Fit the front brace onto a frame.
• Insert a screw into the frame and tighten.
Front Brace
Frame
Back Brace
• Fit the back brace onto the same frame.
• Insert a screw into the frame and tighten.
• Fit the remaining frame to the front and
back brace.
• Insert two screws into the frame assembly
and tighten.
• Fit the handle into the sockets on top of the
frame assembly.
3
Handle

5
Assembly
5
7
8
6
• Insert two screws into the frame and handle
and tighten.
• Fit the post on the toy bar into the slot in
the seat.
• “Snap” the ends of the toy bar into the
sockets in the seat.
Seat
Toy Bar
Post
• Turn the seat over and insert a screw into the
seat bottom and toy bar. Tighten the srew.
• Fit the seat onto the frame.
BACK VIEW

6
Assembly Battery Installation
9
• Carefully turn the frame over.
• Insert six screws into the frame assembly
and tighten.
• Loosen the screw in the battery compartment
door and remove the door.
• Insert three AA (LR6) alkaline batteries.
• Replace the battery compartment door and
tighten the screw.
• If this toy begins to operate erratically, you
may need to reset the electronics. Slide the
power/volume switch off and back on.
• When sounds become faint or stop, it’s time
for an adult to change the batteries.
1,5V x 3
AA (LR6)
BOTTOM VIEW

7
Battery Safety
Information
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery
compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Care
• Wipe this toy with a clean, damp cloth. Do
not immerse.
• This toy has no consumer serviceable parts.
Do not take apart.
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.

8
Stand & Walk
• Baby is rewarded with music when she
pushes the stroller!
• Doll sold separately.
Sit & Play
• Press the heart for fun sounds!
2 Ways to Play!
Slide the power/volume
switch to ON with low
volume, ON with high
volume or OFF.