Fisher-Price X7674 User manual

Please keep this instruction sheet for future reference,
as it contains important information.
Requires three AA and three button cell batteries (included) for operation.
The AA batteries included are for demonstration purposes only.
Adult assembly is required for battery replacement.
Tool required for battery replacement: Phillips screwdriver (not included).
fisher-price.com
X7674

2
CO
N
SU
MER A
SS
I
S
TAN
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
©2013 Mattel. All Rights Reserved.
PRINTED IN CHINA X7674pr-0920
Consumer Information

3
• Take the dragon to the front of the
tower. Then, press the button on the
dragon and the tower will respond!
Recognition Tips:
• The maximum range between the
tower and dragon is 12 feet (3,7 m).
• Bright sunlight or fluorescent lights
may affect this range. Try dimming the
light in the room you are playing in.
• Make sure there is a clear path
between dragon and tower and there
are no obstructions between them.
• If the tower does not respond to the
dragon when you press the button,
you may need to replace the batteries
in the dragon with three, new button
cell (LR44) alkaline batteries.
• Slide the power switch on the tower
to ON or OFF .
• Turn the disk to make the Wizard’s
crystal ball spin.
• Turn the disk to open the chamber and
make the dragon glow!
Power Switch
Let’s Play!

4
Battery Replacement
Tower
For best performance, we recommend
replacing the batteries that came with
the tower with three, new AA (LR6)
alkaline batteries.
• Locate the battery compartment on
the tower.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver and remove the door.
Remove the exhausted batteries and
dispose of them properly.
• Insert three new AA (LR6)
alkaline batteries.
• Replace the battery compartment door
and tighten the screw.
• If the tower begins to operate
erratically, you may need to reset the
electronics. Slide the power switch off
and back on.
• When sounds/light from this toy
become faint or stop, it’s time for
an adult to change the batteries.
Dragon
• Locate the battery compartment on
the dragon.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver and remove the door.
• Remove the exhausted batteries and
dispose of them properly.
• Insert three, new button cell (LR44)
alkaline batteries.
• Replace the battery compartment door
and tighten the screw.
• If the dragon begins to operate
erratically, you may need to reset the
electronics. Remove the batteries and
reinstall them.
• When interaction between the tower and
dragon becomes faint or stops, it’s time
for an adult to change the batteries.
For longer life, use alkaline batteries.
1,5V x 3
LR44 or equivalent
1,5V x 3
AA (LR6)

5
(United States Only)
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to
radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void
the user’s authority to operate
the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference
and (2) this device must accept
any interference received, including
interference that may cause
undesired operation.
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
Battery Safety
Information
FCC Statement

6
ICES-003
This Class B digital apparatus complies
with Canadian ICES-003.Operation is
subject to the following two conditions:
(1) this device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
NMB-003
Cet appareil numérique de la classe B est
conforme à la norme NMB-003
du Canada. L’utilisation de ce dispositif
est autorisée seulement aux conditions
suivantes : (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, même
si ce brouillage est susceptible de
compromettre le fonctionnement
du dispositif.
Consumer Information
• Protect the environment by
not disposing of this product with
household waste (2002/96/EC).
Check your local authority for recycling
advice and facilities.
Care
• Wipe this toy with a clean cloth
dampened with a mild soap and water
solution. Do not immerse.
• This toy has no consumer serviceable
parts. Do not take apart.