Fisher-Price DFP71 User manual

1
DFP71
Keep this instruction sheet for future reference,
as it contains important information.
Requires seven AA (LR6) alkaline batteries (not included) for operation.
Tool needed for battery installation: Phillips screwdriver.
Adult assembly is required. No tool needed for assembly.
fisher-price.com
CRAFTED BY

2
CO
N
SU
MER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Jonathan Adler is a registered trademark of Jonathan
Adler Enterprises, LLC and is being used pursuant to license.
© 2016 Jonathan Adler, Inc. All rights reserved.
©2016 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted.
DFP71-0970-G1
PRINTED IN CHINA 1101059534-DOM

3
PARTS
Mat
Mobile
Giraffe Toy
Lion Toy Koala Toy
2 Links
Elephant Toy
2 Monkey Toys
2 Square Toys
Hub Tummy Wedge
Mirror Toy
4 Arches

4
ASSEMBLY
AND SETUP
1Insert and “snap” the arches into the
hub sockets. Pull on each arch to be
sure it’s secure to the hub.
2Lay the mat on a flat surface, plush side
up. Insert the foot at the end of each
arch into the loops on the mat.
1
5
4
3Attach the toys to any of the loops around
the gym or the wedge.
4Fasten the straps on the back of the mirror
toy to any of the arches.
5Attach the mobile to the hub.
Hint: Attach the extra links to the loops on
the plush toys.
2
3

5
• Loosen the screw in the battery
compartment door and remove
the door.
• Insert three, new AA (LR6)
alkaline batteries.
• Replace the battery compartment door
and tighten the screw.
• Insert the electronic unit back inside
the tummy wedge. Make sure the power
button faces you and the push button is
toward the front of the tummy wedge.
• If the electronic unit begins to operate
erratically, you may need to reset the
electronics. Slide the power switch off
and back on.
• When vibrations become faint or stop, it’s
time for an adult to change the batteries.
• Locate the battery compartment door
on the top side of the hub.
• Loosen the screws in the battery
compartment door and remove the door.
• Insert four, new AA (LR6)
alkaline batteries.
• Replace the battery compartment door
and tighten the screws.
• If the hub begins to operate erratically,
you may need to reset the electronics.
Remove the batteries and reinstall them.
• When the sounds/lights become faint or
stop, it’s time for an adult to change
the batteries.
• Open the fasteners on the tummy wedge.
Remove the electronic unit.
For longer life, use alkaline batteries.
BATTERY
INSTALLATION
1,5V x 7
AA (LR6)
Power Button
Push Button

6
DANCING LIGHTS
MUSIC & CALMING VIBRATIONS
WARNING
Gym
•To prevent entanglement injury, never place the gym in a crib or playpen.
Never add strings, ties or other products to the gym.
Tummy Wedge
•To prevent serious injury or death from suffocation: Never use in crib. Never
use with sleeping child. Never leave child unattended.
• Press the power button to turn the
hub ON. Now, make sounds and
light selections:
Long Play Music – Music plays for up
to 20 minutes. Press again and again
to change songs; press and hold to
turn music off.
Short Play Music – Listen to one song.
When baby bats at the mobile, baby
starts another song! To turn off, press
and hold to turn off music.
Lights – Baby enjoys a twinkling
light show.
• Choose a comfortable volume level for
baby. Press the volume button to
cycle through choices, including turning
volume off.
• Press the button on the tummy wedge
for about 10 minutes of soothing vibrations.

7
• Remove the foot on each arch from
the loops on the mat.
• Squeeze tabs on both sides of an arch
and pull to remove from the hub. Repeat
to remove the other arches from
the hub.
• The tummy wedge cover and the mat
are machine washable. First, remove
the electronic unit from the wedge.
Machine wash cold, on the gentle cycle.
Do not use bleach. Tumble dry low heat.
• Wipe the arches, hub, links and all of the
toys with a clean cloth dampened with
mild soap and water solution. Do not
use bleach. Do not immerse the
electronic unit.
ON-THE-GO FUN STORAGE AND CARE
• For fun on-the-go, remove the mobile
from the hub and attach to baby’s stroller.

8
Battery Safety Information
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
CONSUMER
INFORMATION
FCC STATEMENT (UNITED STATES ONLY)
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications.However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
NOTE: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void
the user’s authority to operate
the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
CAN ICES-3 (B)/NMB-3 (B)
Operation is subject to the following
two conditions: (1) this device may not
cause interference, and (2) this device
must accept any interference, including
interference that may cause undesired
operation of the device.
L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) il doit pouvoir tolérer tout brouillage
radioélectrique reçu, même si ce brouillage
est susceptible de compromettre
son fonctionnement.
• Protect the environment by not
disposing of this product with
household waste (2012/19/EU).
Check your local authority for
recycling advice and facilities.