Fisher-Price GEOTRAX L9182 User manual

L9182
www.fisher-price.com

“Snap” a support top onto
two support columns.
Assembly
• Fit the tabs on an upper ramp into the slots in a lower ramp.
• Insert two screws into the upper ramp. Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
• Repeat this procedure to build the other upper/lower ramp assembly.
UPPER RAMP
SUPPORT TOP
SUPPORT COLUMN
TAB
LOWER RAMP
#4 x 1/2" Screw

“Snap” a support top onto
two support columns.
Assembly
• Fit the tabs on an upper ramp into the slots in a lower ramp.
• Insert two screws into the upper ramp. Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
• Repeat this procedure to build the other upper/lower ramp assembly.
UPPER RAMP
SUPPORT TOP
SUPPORT COLUMN
Elevation Track Tips
You can stack up
support column
assemblies to
make a higher
track layout.
1
To properly support elevated
tracks, always make sure you
have support columns under
track connections.
2
TAB
LOWER RAMP
CURVED TRACK
NOT INCLUDED
3
• When using a curved track (not included) at the bottom of a ramp assembly, be
sure to use a guardrail on the curve. This keeps the fast moving train on the track!
• To attach the guardrail, fit a tab on one end of the guardrail under the curved
track, as shown.
• Bend the guardrail slightly to fit the other two tabs to the curved track.
#4 x 1/2" Screw

This product contains
small parts in its
unassembled state.
Adult assembly
is required.
Parts
A. 6 Straight Tracks
B. 4 Short Tracks
C. 6 Support Tops
D. 2 Upper Ramps
E. 2 Lower Ramps
F. 12 Support Columns
G. 2 Guardrails
H. #4 x
1/2” Screw – 4
Please keep this instruction
sheet for future reference,
as it contains important
information.
Adult assembly is required.
Tool required for battery
installation: Phillips screw-
driver (not included).
AB
D
F
H
x2
x2
x12
x6 x4
x4
x2
Fastener Shown Actual Size
WARNING
C
x6
E
G

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. PRINTED IN CHINA
©2007 Mattel, Inc. All Right Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. L9182pr-0920
For layout ideas visit the
GeoTrax®section of
www.fisher-price.com