Fisher-price Mix 'n go work crew b5294 User manual

Mix ’n Go Work Crew

www.fisher-price.com

Questions? We'd like

to hear from you!

Call Fisher-Price®Consumer

Relations, toll-free at

1-800-432-5437, 8 AM - 6 PM EST

Monday through Friday. Hearing-

impaired consumers using

TTY/TDD equipment, please call

1-800-382-7470. Or, write to:

Fisher-Price®Consumer Relations,

636 Girard Avenue, East Aurora,

New York 14052, U.S.A.

Please keep this instruction sheet

for future reference, as it contains

important information.

Adult Assembly is required.

No tools needed for assembly.

Wipe the toy with a clean damp cloth.

Do not immerse.

For other countries outside the United States:

Canada: call 1-800-567-7724, or write to: Mattel Canada

Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.

Great Britain: telephone 01628 500302. Australia: Mattel

Australia Pty. Ltd., 658 Church Street, Locked Bag #870,

Richmond, Victoria 3121 Australia. Consumer Advisory

Service 1300 135 312. New Zealand: 16-18 William

Pickering Drive, Albany 1331, Auckland. Asia: Mattel East

Asia Ltd, Room 1106, South Tower, World Finance Centre,

Harbour City, Tsimshatsui, HK, China.

B5294

™

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. Printed in China

Troubleshooting

SYMPTOM SOLUTION

Battery power in the engine may be weak. Replace all three batteries

in the engine with fresh, alkaline batteries.

The wheels on the engine or attached cars may be dirty.

Wipe them with a clean cloth.

Battery power in the remote controller may be weak. Replace all

three batteries in the remote controller with fresh, alkaline batteries.

You may be beyond the maximum range of the remote controller

which is about 12 feet.

You may not have a clear path between the remote controller and

the engine. This toy works best when there are no obstructions

between the engine and the remote controller.

Bright sunlight or fluorescent lights may affect the range of the remote

controller. Try dimming the room you are playing in.

The engine may have shut off. If you do not operate the remote

controller for a few minutes, the engine shuts off automatically and

the ready light turns off. Press the power button on the engine, and

operate the remote controller to restart.

Engine does not

respond to the

remote controller

Engine drives slowly

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Note: Changes or modifications not expressly approved by the manufacturer responsible for

compliance could void the user's authority to operate the equipment.

FCC Note (United States Only)

e ICES-003 fNMB-003

e This Class B digital apparatus complies with Canadian ICES-003

f Cet appareil numérique de la classe B est conforme à norme NMB-003 du Canada

www.fisher-price.com

• Hook the cars together and place

them on the track. Make sure the

engine is in front.

Hint: We do not recommend using the

engine on carpets. For best performance,

use on the track provided or hard,

flat surfaces.

• Press the power button on

top of the engine. The

ready light turns on.

• Hold the remote controller

with the stick facing you.

Point the remote controller

toward the engine and

push the stick forward.

The engine moves forward

around the track.

• To stop the engine, pull the

stick backwards to the

stop position.

Hint: If you do not operate the

remote controller for a few minutes,

the engine shuts off and the ready

ight turns off. Press the engine

power button, and operate the

remote controller to restart.

Your child is bound for

a world of adventure!

The more

you collect,

the more

fun it gets!

All Aboard!

READY

LIGHT

POWER

BUTTON

To prevent entanglement,

keep hair away from wheels.

WARNING

Fun Train Sounds with Tracktown Railway™sold separately

You can use this toy with the Tracktown Railway™to hear fun sound effects

Battery Installation

Engine

• Locate the battery compartment on the

back of the engine

• Loosen the screws in the battery

compartment door with a Phillips

screwdriver. Lift the battery compart-

ment door and insert three “AAA” (LR03)

alkaline batteries.

• Close the battery compartment door and

tighten the screws with a Phillips

screwdriver. Do not over-tighten.

• Do not mix old and new batteries or

batteries of different types: alkaline,

standard (carbon-zinc) or rechargeable

(nickel-cadmium).

• Insert batteries as indicated inside the

battery compartment.

• Remove batteries during long periods of

non-use. Always remove exhausted

batteries from the toy. Dispose of batteries

safely. Do not dispose of batteries in a fire.

The batteries may explode or leak.

• Never short-circuit the battery terminals.

• Use only batteries of the same or

equivalent type, as recommended.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the

toy before charging.

• If removable, rechargeable batteries are

used, they are only to be charged under

adult supervision.

Battery

Information

Remote Controller

• Locate the battery compartment on the side of

the remote controller.

• Loosen the screw in the battery compartment

door with a Phillips screwdriver. Remove the

battery compartment door and insert three

“AAA” (LR03) alkaline batteries.

• Replace the battery compartment door and

tighten the screw with a Phillips screwdriver.

Do not over-tighten.

1.5V x 6

“AAA” (LR03)

Battery Safety Information

Batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid

battery leakage:

OFF

FORWARD

(With Sound Effects

When Used in Depot)

3-Position Remote Controller

Your child is bound for

a world of adventure!

Each sold separately & subject to availability.

SHOWN ACTUAL SIZE

We recommend the use of alkaline batteries

for longer battery life.

• Place the remote controller

into any of four the grooves

in the depot.

•Press the power button

on top of the engine. The

ready light turns on.

•Push and hold the stick on

the remote controller all

the way forward.

• You’ll hear fun sound

effects as the engine

heads around the track.

Hint: Sound effects can only

be heard when remote

controller is in the depot.

• To stop the engine, pull

the stick back to the

stop position.

Hint: This toy works

best if you have a clear

path between the remote

controller and the engine.

Point the remote controller

at the engine. The

maximum range of the

remote controller is about

12 feet.

• Hook the cars together and place

them on the track. Make sure the

engine is in front.

Hint: We do not recommend using the

engine on carpets. For best performance,

use on the track provided or hard,

flat surfaces.

• Press the power button on

top of the engine. The

ready light turns on.

• Hold the remote controller

with the stick facing you.

Point the remote controller

toward the engine and

push the stick forward.

The engine moves forward

around the track.

• To stop the engine, pull the

stick backwards to the

stop position.

Hint: If you do not operate the

remote controller for a few minutes,

the engine shuts off and the ready

ight turns off. Press the engine

power button, and operate the

remote controller to restart.

Your child is bound for

a world of adventure!

The more

you collect,

the more

fun it gets!

All Aboard!

READY

LIGHT

POWER

BUTTON

To prevent entanglement,

keep hair away from wheels.

WARNING

Fun Train Sounds with Tracktown Railway™sold separately

You can use this toy with the Tracktown Railway™to hear fun sound effects

Battery Installation

Engine

• Locate the battery compartment on the

back of the engine

• Loosen the screws in the battery

compartment door with a Phillips

screwdriver. Lift the battery compart-

ment door and insert three “AAA” (LR03)

alkaline batteries.

• Close the battery compartment door and

tighten the screws with a Phillips

screwdriver. Do not over-tighten.

• Do not mix old and new batteries or

batteries of different types: alkaline,

standard (carbon-zinc) or rechargeable

(nickel-cadmium).

• Insert batteries as indicated inside the

battery compartment.

• Remove batteries during long periods of

non-use. Always remove exhausted

batteries from the toy. Dispose of batteries

safely. Do not dispose of batteries in a fire.

The batteries may explode or leak.

• Never short-circuit the battery terminals.

• Use only batteries of the same or

equivalent type, as recommended.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the

toy before charging.

• If removable, rechargeable batteries are

used, they are only to be charged under

adult supervision.

Battery

Information

Remote Controller

• Locate the battery compartment on the side of

the remote controller.

• Loosen the screw in the battery compartment

door with a Phillips screwdriver. Remove the

battery compartment door and insert three

“AAA” (LR03) alkaline batteries.

• Replace the battery compartment door and

tighten the screw with a Phillips screwdriver.

Do not over-tighten.

1.5V x 6

“AAA” (LR03)

Battery Safety Information

Batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid

battery leakage:

OFF

FORWARD

(With Sound Effects

When Used in Depot)

3-Position Remote Controller

Your child is bound for

a world of adventure!

Each sold separately & subject to availability.

SHOWN ACTUAL SIZE

We recommend the use of alkaline batteries

for longer battery life.

• Place the remote controller

into any of four the grooves

in the depot.

•Press the power button

on top of the engine. The

ready light turns on.

•Push and hold the stick on

the remote controller all

the way forward.

• You’ll hear fun sound

effects as the engine

heads around the track.

Hint: Sound effects can only

be heard when remote

controller is in the depot.

• To stop the engine, pull

the stick back to the

stop position.

Hint: This toy works

best if you have a clear

path between the remote

controller and the engine.

Point the remote controller

at the engine. The

maximum range of the

remote controller is about

12 feet.