Fisher-Price H4685 User manual

Owner’s
Manual
Model H4685
Ò

2
TABLE OF CONTENTS
TABLE OF CONTENTS
Important Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Decoration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Assembly Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Game Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Free Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Beat the "D"™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Sizzling Shot Clock™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
One on One . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Folding the Chute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Consumer Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

3
IMPORTANT INFORMATION IMPORTANT INFORMATION
• Please keep this Owner’s Manual for future reference, as it contains
important information.
• Adult assembly is required. You may need the assistance of another adult to
complete assembly.
• Do not use Shot Block™Basketball in a room with direct sunlight. Do not use
Shot Block™Basketball outdoors.
• Tool required for assembly: Phillips screwdriver (not included).
• You may find it helpful to use an adjustable wrench to hold the M5 lock nuts while
tightening the M5 bolts.
• Requires four, “C” (LR14) alkaline batteries (not included) for operation. Each fresh set of
batteries should last approximately 15 hours (of continuous use).
• Please identify all parts before assembly and save all packaging material until assembly
is complete to ensure that no parts are discarded.
• If you experience a problem, or are missing a part, please visit us on-line at
www.service.fisher-price.com. Or call, 1-800-432-5437 rather than return this
product to the store.
• Use only the basketballs supplied with this product. Do not use with regulation size
(actual) basketballs.
CAUTION
This product contains small parts
in its unassembled state.
Adult assembly is required.

4
PARTS
PARTS
2
3
1
4
1 Backboard
2 Chute
3 U Tube
4 Door Clip
5 2 Pivot Tubes
(Left and Right)
5
Part not shown: Label Sheet

5
6
8
7
Tip: All fasteners shown actual size.
Note: Tighten and loosen all bolts and screws with a
Phillips screwdriver. Do not over-tighten the fasteners.
We’ve included extra fasteners for your convenience!
M5 x 23 mm Bolt – 8
#8 x 1" Screw – 4
M5 Lock Nut – 8
9
6 2 Tubes
(Left and Right)
7 2 Basketballs
8 Handle
9 2 Hinge Tubes
(Left and Right)

6
BATTERY INSTALLATION
BATTERY INSTALLATION
• Loosen the screws in the battery compartment door on the back of the backboard.
Remove the battery compartment door.
• Insert four "C" (LR14) alkaline batteries.
• Replace the battery compartment door and tighten the screws.
Tip: When sounds, lights or movement become faint, sluggish or stop, it’s time
for an adult to change the batteries!
Battery
Compartment
Door
Tip: We recommend the use of alkaline batteries for longer battery life!
BATTERY SAFETY INFORMATION
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury
or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely. Do not dispose of batteries in a fire. The
batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged
under adult supervision.
1.5V x 4
"C" (LR14)
SHOWN ACTUAL SIZE

7
DECORATION
DECORATION
• Before applying the labels, wipe all
surfaces with a clean, dry cloth to
remove any dust or oils.
• Apply the labels as indicated in the
illustrations.
4
5
1
2
3
7
8
9
10
6
6
11
12
13
™
™
19
14
15
16
17 18

8
ASSEMBLY TIP
ASSEMBLY TIP
• When tightening bolts in tubes, you will need to press the lock nut into the opposite side
of the tube (the hex hole). Place your thumb on the lock nut while tightening bolt with a
Phillips screwdriver.
Tip: You may want to use an adjustable wrench to hold the lock nut in place.

9
STEP 1
• Place the backboard face down on a flat surface.
• Fit the ends of the U tube into the grooves in the bottom of the backboard.
U Tube
Backboard
Grooves
ASSEMBLY
ASSEMBLY

10
STEP 2
• Insert four #8 x 1" screws into the U tube and tighten.
ASSEMBLY
ASSEMBLY

11
STEP 3
• Insert the door clip into the slot in the top of the backboard until it "snaps" into place.
Door Clip
Slot

12
STEP 4
• Position the chute face down
(loops are upright).
• Position the pivot tubes so that the
ball faces out and the pivot tube
with the white dot is to the left.
• Slide the pivot tubes through the top
two loops on the chute, as shown.
Loops Pivot Tube
Chute
ASSEMBLY
ASSEMBLY
Ball
Ball
Pivot Tube
White Dot

13
STEP 5
• Next, position the hinge tubes so
that the rounded side is up.
• Match the hinge tube with the
white dot to the pivot tube with
the white dot.
• Next, slide the hinge tubes into
the next two loops on the chute,
as shown.
Loops
Hinge Tubes
(Rounded Side Up)
White Dot
White Dot

14
STEP 6
• Fit the end of each hinge tube into
the end of each pivot tube.
Hint: If the hinge tubes do not fit
in the pivot tubes, reverse the hinge
tubes. Make sure the white dot on
the hinge tube matches the white
dot on the pivot tube.
Hinge Tube
Pivot Tube
ASSEMBLY
ASSEMBLY
White Dot
White Dot

15
STEP 7
• Insert an M5 x 23 mm bolt through the outside of each pivot tube.
• Fit an M5 lock nut, rounded side out, to the hex hole in the opposite side of each
pivot tube.
• While holding the lock nut in place, tighten the bolt in each pivot tube.
Pivot
Tubes
Rounded
Side

16
STEP 8
• Now, match the tube with the
white dot to the hinge tube with
the white dot.
• Slide the tubes through the
next two loops, and onto the
end of each hinge tube.
Loops
Hinge
Tubes
Tubes
ASSEMBLY
ASSEMBLY
White Dot
White Dot

17
STEP 9
• Insert an M5 x 23 mm bolt through the underside of each tube.
• Fit an M5 lock nut, rounded side up, to the hex hole in the opposite side of each tube.
• While holding the lock nut in place, tighten the bolt.
Rounded
Side

18
STEP 10
• Position the handle so that it curves down.
• Match the white dot on the handle with the white dot on the tube.
• Fit the handle through the last two loops on the chute and onto the end of each tube.
Tubes
Handle
Loops
ASSEMBLY
ASSEMBLY
White Dot
White Dot

19
STEP 11
• Insert two M5 x 23 mm bolts through each end of the handle.
• Fit two M5 lock nuts, rounded side up, to the hex openings in each end of the handle.
• While holding the lock nuts in place, tighten the bolts.
Rounded
Side

20
STEP 12
• Wrap the straps on the chute around the handle and fasten.
Straps
ASSEMBLY
ASSEMBLY