Fisher-Price Jungle Sounds Shape Sorter 73466 User manual

• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove
exhausted batteries from the toy. Battery leakage and corrosion can
damage this toy. Dispose of batteries safely.
• Do not dispose of batteries in a fire.The batteries may explode or leak.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the
“Battery Replacement” instructions are to be used.
• If removable rechargeable batteries are used, they are only to be
charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before they
are charged.
• If you use a battery charger, it should be examined regularly for
damage to the cord, plug, enclosure and other parts. Do not use a
damaged battery charger until it has been properly repaired.
Battery Tips
3
• Locate the battery
compartment door on
the bottom of the toy.
• Loosen the screws in the
battery compartment door
with a Phillips screwdriver.
• Remove the battery
compartment door.
• Insert three “AA” (LR6)
alkaline batteries, as
indicated inside the
battery compartment.
Hint: We recommend using alkaline batteries for longer life.
• Close the battery compartment door and tighten the screws with a
Phillips screwdriver. Do not over-tighten.
• When sounds or lights from this toy become faint or stop, it’s time for
an adult to change the batteries!
Battery Replacement
2
For best performance, we recommend replacing the batteries that
came with this toy with three, new alkaline “AA” (LR6) batteries.
Battery Compartment Door
1.5V x 3
“AA” (LR6)
Shown Actual Size
Jungle SoundsJungle SoundsJungle Sounds
Jungle Sounds
Shape Sorter
Shape Sorter™
w
w
w.
fi
s
he
r
-p
r
i
c
e
.
c
o
m
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “AA” batteries (included).
Adult assembly is required for battery replacement.
Tool required for battery replacement:
Phillips screwdriver (not included).
L
E
A
R
N
I
N
G
P
A
T
T
E
R
N
S
L
E
A
R
N
I
N
G
P
A
T
T
E
R
N
S
™
Product Number: 73466
73466pr-0920.qrk 7/19/01 2:40 PM Page 1

Questions? We'd like to hear from you!
Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-KIDS,
8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers
using TTY/TDD equipment, please call 1-800-382-7470.
Or, write to:
Fisher-Price® Consumer Relations
636 Girard Avenue
East Aurora, New York 14052
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2001 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in China 73466pr-0920
Consumer Information
For other countries, outside the United States:
Canada: call 1-800-567-7724, or write to: Mattel Canada Inc, 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2.
Great Britain: telephone [phone].
Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond,Victoria
3121 Australia. Consumer Advisory Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
Base
• Wipe the surface with a clean cloth dampened with a mild soap and
water solution.
• Do not immerse the base.
Fabric Shapes
• Machine wash cold on a gentle cycle. Do not use bleach. Tumble dry on
low heat.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's
authority to operate the equipment.
FCC Note (United States Only)
5
Care
• Locate the power/volume switch on
the side of the toy.
• The switch has three positions: off ;
on with high volume and on with low volume .
Hint: If your child is not actively playing with this toy, it turns off
automatically (sleep mode).
• Slide the power/volume switch to the off position when not in use.
• When baby places an animal shape through the matching hole, they’ll
hear a sound effect, a song and the light below the opening will flash.
Note: When an animal shape is placed in a matching opening, a sensor
button is pressed activating sounds and light. Placing a wrong shape
through an opening may not activate sounds or light.
Fun Music, Lights
and Sound Effects
4
Power/Volume Switch
Power/Volume Switch
73466pr-0920.qrk 7/19/01 2:40 PM Page 4