Fisher-Price Laugh & Learn Smart Learning Home User manual

Laugh & Learn®
Smart Learning Home™
ASSEMBLY GUIDE
Scan it. Watch it.
Build it.
fisher-price.com/assembly/FJP89
EASY
ASSEMBLY
VIDEO

2
BEFORE YOU BEGIN
Four C (LR14) alkaline
batteries are required
(not included).
For longer life, use
alkaline batteries.
Adult assembly is
required. You’ll need
a Phillips screwdriver
(not included) for
assembly and battery
installation.
Keep these
instructions for future
reference as they
contain important
information.
Clean with
a damp cloth.
Do not immerse.
Set aside 45 minutes
for assembly.
45
x4
1,5V
C
(LR14)
GOOD TO KNOW!
This product includes a lot
of factory assembled screws
and some that you’ll need to
assemblei23 to be exact!
Do not over-tighten assembled
screws or the screws in the
battery door.
When sound or lights become
faint or stop, it’s time for an
adult to change the batteries.
The Laugh & Learn® Smart
Learning Home™ interacts
with the Laugh & Learn® 3-in-1
Smart Car (not included and
sold separately). Be sure the
car is no further than 4 feet
(1,2 meters) from the home.
Bright sunlight or fluorescent
light may affect the range
between the car and the home.
Try dimming room lights.
ASSEMBLY
VIDEO
Questions?
Scan this code!
fisher-price.com/assembly/FJP89
Insert screws into holes that
have rings around them.
Factory assembled screw holes
do not have rings around them.

3
ASSEMBLED PARTS

4
ASSEMBLED PARTS
CAUTION
This package
contains small
parts. For adult
assembly only.
x 23
M3,5 x 19 mm
We included
an extra screw
just in case
you lose one!
Left & Right Left & Right

5
1
3
2
4
ASSEMBLY
x 2
Push to “snap” the
recycle bin to the
house panel. This may
take a lot of force.

6
5
7
6
8
ASSEMBLY
x 4
x 2
Insert
screws on
this side
of the
assembly.

7
9
11
10
ASSEMBLY
x 2 x 1
Insert a screw
on this side of
the assembly.

8
12
13
ASSEMBLY
x 4
Be sure to make
this connection!
Make sure wires
are not twisted.

9
14
15
ASSEMBLY
Locate the battery door
next to the froggy slider.
Loosen the screws in the
battery door and remove
the door.
Insert four, new C (LR14)
alkaline batteries. Make
sure you insert the
batteries correctly!
Replace the battery door
and tighten the screws.
Slide the power-volume
switch ON and open
and close the door.
You should hear sound
and see lights. If you do
not, you may not have
connected the wires in
step 13. Go back and be
sure you’ve connected
the wires in step 13.

10
16
17
ASSEMBLY
x 2