Fisher-Price LET'S GO BOWLING M1446 User manual

www.fisher-price.com
M1446

For best performance, we recommend replacing the batteries that came with this toy with two
new “AA” (LR6) alkaline batteries.
• Locate the battery compartment on the bottom of the toy.
• Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the
battery compartment door.
• Remove exhausted batteries and throw them away.
• Insert two “AA” (LR6) alkaline batteries, as indicated in the battery compartment.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screw.
• When sounds become faint or stop, it’s time for an adult to change the batteries!
• Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities.
Battery Replacement
1.5V x 2
“AA” (LR6)
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn
injury or ruin your toy. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries from the
toy. Dispose of batteries safely. Do not dispose of the product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removable, rechargeable batteries are used, they are only to be charged under
adult supervision.
Battery Safety Information

Let's Go Bowling
• Locate the power switch on the bottom of the ball. Slide the switch on or when you’re
finished playing with the toy, slide the switch off .
• Roll the "cow" ball and you'll hear music and fun animal sounds!
Please keep small parts such as the plastic tab out of
children’s reach. Throw the plastic tab away.
CAUTION
Before First Use
Note: A plastic tab was attached to the toy for in-store demonstration purposes. While the tab
may have already been removed, check the back of the toy to be sure. If the plastic tab is still
attached, open the fasteners on the back of the toy and pull to remove the tab. Close the
fasteners and throw the plastic tab away.
Care
• Wipe with a clean cloth dampened with a mild soap and water solution. Do not immerse.
• This toy has no consumer serviceable parts. Do not take this toy apart.
Power Switch

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA M1446a-0920
• Please keep this instruction sheet for future reference, as it contains important information.
• Requires two "AA" batteries (included).
• Adult assembly is required for battery replacement.
• Tool required for battery replacement: Phillips screwdriver (not included).
Consumer Information
United States Only
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
FCC Statement