Fisher-Price N7044 User manual

www.fisher-price.com
Each sold separately and subject to availability.
Please keep this instruction sheet for future reference, as it contains important information.
Requires one "AA" battery (included) for operation.
Battery included is for demonstration purposes only.
Adult assembly is required for battery replacement.
Tool required for battery replacement: Phillips screwdriver (not included).
Wipe the toy with a clean, damp cloth. Do not immerse this toy.
N7044
N7044
N7046
N7046
N7045
N7045

Battery Replacement
In exceptional circumstances, batteries
may leak fluids that can cause a
chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose
of batteries safely. Do not dispose of
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
Battery Safety Information
For best performance, we recommend
replacing the battery that came
with this toy with a new "AA" (LR6)
alkaline battery.
• Locate the battery compartment on
the base of the head.
• Loosen the screw in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert an "AA" (LR6) alkaline battery.
Hint: We recommend using an alkaline
battery for longer battery life.
• Replace the battery compartment door
and tighten the screw with a Phillips
screwdriver.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Remove the battery and replace it in
the toy.
• When sounds from this toy become
faint or stop, it’s time for an adult to
change the battery.
Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities
(Europe only).
1.5V
“AA” (LR6)

Stack Up the Fun!
• Press the button on top of the head
to see the animal's ears flap, and
hear fun tunes and sound effects!
• Place the rings on the base.
Hint: The rings only fit in a certain order.
If the ring does not fit, take it off and try
a different one.
• Fit the head on top and hear a song!

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. N7044a-0920
©2008 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
ICES-003
This Class B digital apparatus complies with
Canadian ICES-003.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
NMB-003
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée seulement
aux conditions suivantes: (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du dispositif doit
être prêt à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de
compromettre le fonctionnement du dispositif.
FCC Statement (United States Only)
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
Note: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Consumer Information