Fisher-Price Ocean Wonders Aquarium H6318 User manual

www.fisher-price.com
H6318
Aquarium
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “D” (LR20) alkaline batteries for operation (not included).
An adult must install batteries and attach toy to crib.
Tool required for battery installation:
Phillips screwdriver (not included).

2
IMPORTANT! Always use the straps provided to attach this toy to a crib.
Button
Slot
Crib Rail
Attachment
Strap
Note: If you are attaching this
toy to a crib side rail that can be
lowered and raised, make sure
the crib side rail is in the raised
(locked) position whenever a child
is in the crib.
• Position the toy inside the crib so
that the socket fits between two
of the crib rails.
• Wrap one of the toy’s attachment
straps around the crib spindles.
• Fasten the attachment strap slot
to the button on the back of
the toy. This toy should be snug
against the crib rail and spindles.
Use the strap slot that provides
the tightest fit.
• Repeat this procedure to secure
the other attachment strap.
Back View
Crib Attachment and Battery Installation
1
Socket

WARNING
To prevent entrapment of baby’s head, keep distance
between the bottom of the product and the crib
mattress to at least 7 inches.
• If the distance between the toy
and the mattress is less than
7 inches: readjust the attach-
ment straps to lift the product;
or lower the crib mattress.
Bottom
of Toy Mattress
2
Crib Attachment and Battery Installation
3
At least
7 inches

Battery Compartment Door
4
• Insert three “D” (LR20)
alkaline batteries.
Hint: We recommend using
alkaline batteries for longer
battery life.
• Replace the battery
compartment door and
tighten the screws
with a Phillips screwdriver.
Do not over-tighten.
• If sounds or lights from this
toy become faint or stop, it's
time for an adult to change
the batteries.
• Locate the battery compart-
ment door on the battery box.
• Loosen the screws in the
battery compartment door
with a Phillips screwdriver.
Remove the battery
compartment door.
• Fit the battery box to the
socket on the back of
the toy.
• Tighten the four screws inside
the battery compartment to
secure the battery box.
Crib Attachment and Battery Installation
Battery Box
Socket
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. H6318a-0920
© 2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
4
3

Battery Safety Information
In exceptional circumstances,
batteries may leak fluids that
can cause a chemical burn
injury or ruin your toy.
To avoid battery leakage:
• Do not mix old and new
batteries or batteries of
different types: alkaline,
standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated
inside the battery compartment.
• Remove batteries during long
periods of non-use. Always
remove exhausted batteries
from the toy. Dispose of bat-
teries safely. Do not dispose of
this toy in a fire. The batteries
inside may explode or leak.
• Never short-circuit the bat-
tery terminals.
• Use only batteries of the
same or equivalent type,
as recommended.
• Do not charge non-
rechargeable batteries.
• Remove rechargeable batteries
from the toy before charging.
• If removable, rechargeable
batteries are used, they are
only to be charged under
adult supervision.
Battery Information
1.5V x 3
“D” (LR20)
SHOWN ACTUAL SIZE
5
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.