Fisher-Price DINOSAURS imaginext M3276 User manual

www.fisher-price.com M3276
Colors and decorations of the product may vary
from photos shown.

Older children and experienced Imaginext™System users
The more your child plays with this toy, and development and skill increases, the less
assistance your child needs! Experienced Imaginext™users will enjoy using all parts of
this toy to build their own structures or try building an alternate assembly shown below.
Welcome to the Imaginext™System
The colors and decorations of the product may sometimes vary from these instructions.
Younger children
& those new to
the Imaginext™
System
Use our step-by-step
instructions to build
the structure shown
on the cover of this
booklet. Encourage
your child to assist
you with some of the
simple steps. This
assembly is ideal for
active play and it can
be used as a playset
rather than a
building toy.
2

3
One-Time Assembly
• Fit the pegs in the upper skull into
the matching holes in the frame.
• Insert four, screws into the back
of the frame and tighten them to
secure the upper skull. Do not
over-tighten.
• Repeat this procedure to attach the
lower skull.
#4 x 3/8" Screw - 8
Shown Actual Size Frame
Lower Skull
Upper Skull
This toy contains small parts in its unassembled state.
Adult assembly is required.
CAUTION

Battery Installation
4
For best performance, we recommend replacing the batteries that came with this toy with
three, new alkaline "AAA" (LR03) batteries. We recommend using alkaline batteries for longer
battery life.
• Locate the battery compartment on the upper skull. Locate the battery compartment on the bottom
of the dinosaur.
• Loosen the screw in each battery compartment door with a Phillips screwdriver. Remove the
battery compartment door.
• Remove the worn batteries from the dinosaur and dispose of them properly.
• Insert three, "AAA" (LR03) alkaline batteries in each toy, as indicated inside each battery
compartment.
• Replace the battery compartment doors and tighten each screw with a Phillips screwdriver. Do not over-
tighten.
• When sounds from this toy become faint or stop, it’s time for an adult to change the batteries!
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries from the toy.
Dispose of batteries safely. Do not dispose of batteries in a fire. The batteries may explode or leak.
• Never short circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
• Protect the environment by not disposing of this product with household waste (2002/96/EC).
Check your local authority for recycling advice and facilities.
1.5V x 6
“AAA” (LR03)

1.
5
2.
Let’s Build It!
4.
3.

8.
Let’s Build It!
7.
6
6.5.

9.
7
10.
Let’s Build It!
12.
11.

8
16.
Let’s Build It!
14.13.
15.

Let’s Build It!
9
18.17.
20.19.

21.
10
Let’s Build It!
• Locate the On/Off switch on the underside of the
upper skull.
• Slide the switch to the position to turn the toy on
and to the position to turn it off.
Hint: If your child is not actively playing with this
toy, it turns off automatically (sleep mode).
• When your child is finished playing with this toy,
slide the on/off switch to the off position.