Fisher-Price T6340 User manual

www.fisher-price.com
www.fisher-price.com
T6340
T6340

2
WARNING
Consumer Information
Prevent Entanglement Injury
• Keep mobile out of baby’s reach.
• Remove mobile portion of product from crib or playpen
when baby begins to push up on hands and knees.
• This product may not attach to all crib designs. Do not add
additional strings or straps to attach to crib or playpen.
• Use ONLY attached to a crib or playpen.
IMPORTANT! Always attach with all provided fasteners tightly to a crib or playpen according to the
instructions. Do not add additional strings or straps to attach to a crib. Check frequently.
• Please keep this instruction sheet for future reference, as it contains important information.
• Requires four "C" (LR14) alkaline batteries for mobile/base operation and two "AAA"
(LR03) alkaline batteries for remote operation (batteries not included).
• Adult assembly is required.
• Tool required for assembly: Phillips screwdriver (not included).
• The mobile portion of this product may be used from birth until 5 months.
• The base portion of this product may be used from birth until 24 months.
• A crib mobile is intended for visual stimulation and is not to be grasped by a child.
• This toy has no consumer serviceable parts. Do not take this toy apart.
• If this product begins to operate erratically, you may need to reset the electronics.
Slide the power/volume switch on the base off and then back on. Remove the batteries
from the remote and replace them.

3
Parts
Arm
Note: All of the screws used to assemble this toy are attached to the product.
Follow these instructions carefully to fully secure the screws. Tighten and loosen all
screws with a Phillips screwdriver. Do not over-tighten the screws.
Base
Crib Connector
Mobile
Remote

4
CO
N
S
UMER
ASS
I
S
T
A
N
CE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Consumer Information
• Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities
(Europe only).
Care
• Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do not
immerse this toy. The soft toys are surface washable.
Fisher Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. T6340a-0920
©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA

5
Remote
• Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove
the battery compartment door.
• Insert two "AAA" (LR03) alkaline batteries.
• Replace the battery compartment door and tighten the screw.
• If the base does not seem to react to the remote after replacing batteries in the base,
it's time for an adult to replace the batteries in the remote.
1,5V x 4
"C" (LR14)
Base
• Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove
the battery compartment door.
• Insert four "C" (LR14) alkaline batteries.
• Replace the battery compartment door and tighten the screws.
IMPORTANT! Under normal use conditions, the batteries in the base will require replacement
more often than the batteries in the remote. When sounds or motion become faint or stop,
it’s time for an adult to change the batteries.
Battery Installation
1,5V x 2
"AAA" (LR03)
Hint: We recommend using alkaline batteries for longer battery life.

6
In exceptional circumstances, batteries may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely. Do not dispose of this product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
•
If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
Battery Safety Information

7
1
2
• Fit the crib connector to the base and tighten both screws.
IMPORTANT! Make sure the straps are over the top of the crib connector.
Crib Connector
Base
• First, press the button on the base, next to the socket A
and then slide the socket door open B.
• Fit the arm into the socket in the base and tighten
both screws.
Arm
Socket
1
1
A
PRESS
SLIDE
SLIDE
B
Assembly

8
Assembly
• Fit the mobile to the end of the arm.
• Push to "snap" the mobile onto the arm. Pull the mobile to be sure it's secure to
the arm.
Arm
Mobile
1
3

9
Crib Attachment
WARNING
Prevent Entanglement Injury
• Keep mobile out of baby’s reach.
• Remove mobile portion of product from crib or playpen
when baby begins to push up on hands and knees.
• This product may not attach to all crib designs. Do not add
additional strings or straps to attach to crib or playpen.
• Use ONLY attached to a crib or playpen.

10
• Position the base so that the decorated side faces the inside of the crib.
• Fit the base onto the crib top rail.
Hint: The base is designed to fit most crib designs. Please refer to the main illustration
and the inset photograph.
• Make sure the top strap is hanging over the crib top rail. Pull the bottom strap through
the crib rails.
• Buckle the straps. Make sure you hear a “click”.
IMPORTANT! If you are attaching this toy to a crib side rail that can be lowered and raised,
make sure the crib side rail is in the raised (locked) position whenever a child is in the crib.
Crib Top Rail
Base
Buckles
Buckles
1
1
Crib Attachment

11
Crib Attachment
• Make sure the straps are tightened securely around the crib rail.
• While pushing the tab at the bottom of the buckle, pull the free end of the strap to
tighten on the rail.
Hint: You can secure the free end of the strap to the base.
1
2
• Tie the base strings to a crib spindle.
Note: It is better the tie the strings in a knot than a bow, since a bow may be easily untied.
1
3

12
Crib Attachment
Crib Removal
• If the distance between the base and the mattress is less than 7 Inches (18 cm),
lower the crib mattress.
• To remove the base from a crib rail, simply press the tabs on each side of the buckle.
Mattress
Mattress
At Least 7 Inches (18 cm)
At Least 7 Inches (18 cm)
Bottom of Base
Bottom of Base
1
4
PRESS
PRESS
PRESS
PRESS

13
Use
IMPORTANT!
• In the unlikely event that use of the remote interferes with normal use of other remote
controlled equipment, such as televisions, stereos, or use of other electronic or battery
powered appliances interfere with operation of the mobile, do not use both appliances
at the same time.
• For best performance between the mobile and the remote, avoid using the remote in
areas of bright light. In bright natural or artificial light, you may notice loss of range.
Move the mobile or otherwise reduce the amount of light to improve performance.
• When using the remote, make sure the arrow on the base is pointing towards the
transmitter window on the remote. For best results make sure the path between
the transmitter window on the remote and the base are in a direct line and free of
obstacles. Position the base so that the arrow points to the area from which you’re
most likely to use the remote.
Remote
Remote

14
• Press the button on the remote to activate the mobile. Press again to stop.
Note: The remote will remain active for about four hours. After four hours you will need to
slide the power/volume switch on the mobile off, then on again to reactivate.
Power/Volume Switch
Power/Volume Switch
• Slide the switch to ON with low volume or ON with
high volume . When finished using the product, slide
the switch OFF .
Sound Select Switch
Sound Select Switch
• Slide the switch to select:
Classical Music
Lullabies
Nature Sounds
Mode Select Switch
Mode Select Switch
• Slide the switch to select a mode:
Music and Motion
Music only
Use

15
Convert to Music Box
Remove the mobile and use as a music box!
• Loosen both screws in the arm near the
base. Lift and remove the arm.
• Close the socket door on top of
the base.
Hint: The socket door must be completely
closed for use as a music box.
• Store the mobile in a safe place for
future use.

16
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NMB-003
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit
pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le
fonctionnement du dispositif.
FCC Statement (United States Only)