Fisher-Price Voice Tech Rescue Heroes 78361 User manual

w
w
w
.r
e
s
cu
e
h
e
r
o
e
s
.
c
o
m
Model Number: 78361
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Tool required for battery installation:
Phillips screwdriver (not included).
Requires three “AA” (LR6) alkaline batteries (not included).
Police Cruiser
Figures sold separately and subject to availability.

2
ASSEMBLY
Attaching the Wheels
• Insert and “snap” the two larger wheels onto the back axles.
• Insert and “snap” the two smaller wheels onto the front axles.
One-time assembly is now complete.
2
1
(Other #1
on opposite
door)
(#2 On opposite side)
(#17 On opposite fender)
3
16
8
21
22
23
9
19
4
24
6
14
11
13 10 13 12 20 15 7
24
5
18
Labels
Proper label application will help keep labels looking their best!
When applying labels, keep the following guidelines in mind:
• Wash hands before applying labels.
• Before applying labels, wipe the surface of the toy with a clean, dry
cloth to remove dust or oils.
• For best results, avoid repositioning a label once it has been applied.
Smaller
Wheel
Larger
Wheel

Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always
remove exhausted batteries from the toy. Battery leakage and
corrosion can damage this toy. Dispose of batteries safely.
BATTERY INSTALLATION
3
• Locate the battery
compartment door on
the bottom of car.
• Loosen the screw in the battery compartment door with a Phillips
screwdriver. Remove the battery compartment door.
• Insert three, “AA” (LR6) alkaline batteries, as indicated inside the
battery compartment.
• Replace the battery compartment door and tighten the screw with
a Phillips screwdriver. Do not over-tighten.
• When lights or sounds from this toy become faint or stop, it’s
time for an adult to change the batteries!
Hint: We recommend using alkaline batteries for longer battery life.
Battery
Compartment
Door
1.5V x 3
“AA” (LR6)
SHOWN ACTUAL SIZE

4
• Do not dispose of batteries in a fire. The batteries may explode
or leak.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in
the “Battery Installation” instructions are to be used.
• If removable rechargeable batteries are used, they are only to be
charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before
they are charged.
• If you use a battery charger, it should be examined regularly for
damage to the cord, plug, enclosure and other parts. Do not use
a damaged battery charger until it has been properly repaired.
Power
Switch
POWER SWITCH
• Locate the power switch on the bottom of the toy.
• Slide the switch to the •position to turn the toy on.
When you're finished, slide the switch to the off o position.

• Lift the windshield on
the vehicle.
• Slide the connector on the
back of any Voice Tech™
Rescue Heroes™figure into the slot on the back of the seat.
• Return the windshield to its normal position.
Hints - For proper function, make sure the connector is
completely inserted.
- Voice feature only works with Voice Tech™
Rescue Heroes™figures.
LET’S MOVE!
5
Windshield
Slot in
Seat
Connector

We need to
move out!
LET’S MOVE!
6
Press for lights and
siren sound effects.
Inbound
for rescue!
Press to hear Voice Tech™
figures talk.
Light Bar
Tailgate lifts for storing packs
or transporting suspects.
Push the
cruiser
and hear
engine
sounds.

LAUNCH THE CUFFS!
7
CAUTION
• Do not launch the cuffs at close range.
• Only use the projectile (cuffs) supplied with
this toy.
• Do not fire at people or animals.
PRESS
Cuff Launcher
• To load the cuffs, grasp the key on the end of the cord near the
back bumper and pull the cord back through the launcher until the
cuffs lock in place.
• Press the release button on the hood to launch the giant handcuff.

CARE
• Wipe with a clean cloth dampened with a mild soap and
water solution. Do not immerse this toy.
Questions? We'd like to hear from you!
Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST
Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please
call 1-800-382-7470.
Or, write to: Fisher-Price® Consumer Relations 636 Girard Avenue
East Aurora, New York 14052
For other countries, outside the United States:
Canada: call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga,
Ontario L5R 3W2.
Great Britain: telephone [phone].
Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121
Australia. Consumer Advisory Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.
Consumer Information
FCC Note (United States Only)
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2002 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in China 78361pr-0920
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment.