Fisher-Price View-Master SUPER SOUNDS H4159 User manual

3D VIEWER
3D VIEWER
Please keep this instruction sheet for future reference,
as it contains important information.
Requires two “AAA” batteries (included).
Adult assembly is required for battery replacement.
Tool required for battery installation: Phillips screwdriver (not included).
www.fi sher-price.com
In an effort to provide the best products possible, we periodically make product
modifi cations. Actual products may not be identical to items pictured.
Model H4159

3D VIEWER WITH DEMO REEL (INCLUDED)
1. Locate the power/volume switch on the side of the viewer.
Slide the switch to either on with low volume ; or on with high
volume .
2. Press the advance lever to move to the next image. Listen to sound
effects, character voices and music!
3. Press the sound repeat button to hear the sounds again and again!
Notes:
• The demo reel (included) does not require an audio cartridge for
sounds. Other Super Sounds™ Reels (sold separately) require an
Audio Cartridge. See next page for instructions.
• Use this viewer with any View-Master® reels to see images only.
Power/Volume Switch
Power/Volume
Sound Repeat
Advance

SUPER SOUNDS™ REEL AND
AUDIO CARTRIDGE (SOLD SEPARATELY)
1. Insert a View-Master® Super SoundsTM reel into the viewer,
caption side up.
2. Insert the matching Super SoundsTM 3D audio cartridge
into the viewer.
3. Slide the power/volume switch on and press the advance lever.
Listen to fun sound effects, character voices and music!
Note: Store Super Sounds™ reels inside the Audio Cartridge Case.
Super Sounds™ 3D Reels and Audio Cartridges
are sold together in sets.
Super Sounds™
3D Reel
(sold seperately)
Super Sounds™ Audio Cartridge
(included with Super SoundsTM 3D Reel)

FCC NOTE (UNITED STATES ONLY)
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
Questions? We'd like to hear from you!
Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-5437,
8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers
using TTY/TDD equipment, please call 1-800-382-7470. Or, visit us on
line at www.service.mattel.com.
Write to us at: Fisher-Price® Consumer Relations, 636 Girard Avenue,
East Aurora, New York 14052
CONSUMER INFORMATION
For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2;
www.service.mattel.com.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A.
©2005 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA H4159pr-0920

Battery Compartment Door
1.5V x 2
“AAA” (LR03)
Shown Actual Size
+
• Locate the battery compartment on the bottom of the toy.
• Loosen the screw in the battery compartment door with a Phillips
screwdriver. Remove the battery compartment door.
• Insert two “AAA” (LR03) alkaline batteries, as indicated inside the
battery compartment.
Hint: We recommend using alkaline batteries for longer life.
• Replace the battery compartment door and tighten the screws with
a Phillips screwdriver. Do not over-tighten.
• When sounds become erratic, faint or stop, it’s time for an adult to
change the batteries!
BATTERY REPLACEMENT
For best performance, we
recommend replacing the
batteries that came with
this toy with two, new
alkaline “AAA” (LR03)
batteries.

BATTERY SAFETY INFORMATION
Batteries may leak fluids that can cause a chemical burn injury or
ruin your toy. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types:
alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove
exhausted batteries from the toy. Dispose of batteries safely. Do not
dispose of batteries in a fire. The batteries may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removable, rechargeable batteries are used, they are only to be
charged under adult supervision.
CARE
• Wipe this toy with a clean cloth dampened with a mild soap
and water solution. Do not immerse this toy.
• This toy has no consumer serviceable parts. Do not take this
toy apart.