Fisher-Price W9898 User manual

fisher-price.com
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Requires two "AA" batteries (included).
Tool required for assembly: Phillips screwdriver (not included).
W9898

2
Assembly
• Insert a screw into the bottom of the
base and tighten.
• Repeat this procedure to assemble the
other small support and base.
• Fit a small support into the socket in
a base.
Hint: The small supports are designed to
fit into the bases one way. If a support
does not seem to fit, turn it around or try
assembling it to the other base.
1
Mat
Assembled Parts
2 Bases 3 Hanging Toys
2 Small Supports
Small Support
Base Socket
CAUTION
This package contains small
parts in an unassembled
state. Adult assembly
is required.
Large
Support
Arch
2BOTTOM VIEW
#6 x ¾" (1,9 cm) Screw - 4
Screw shown actual size. Tighten all
screws with a Phillips screwdriver.
Do not over-tighten.
Screw

3
Assembly
• Fit the tabs on the large support into
the slots in the arch. Push to "snap"
into place.
• Hook the toys to the loops on the arch.
• Fit the ends of the small supports into
the slots in the arch.
Hint: The small supports are designed to
fit into the arch one way. If they do not
seem to fit, turn the arch around and
try again.
3
5
7
6
• Place the mat, decorated side up, between
the bases and large support.
• Fit the straps on the mat through the slots
in the support/bases. Make sure the tab on
the end of each strap forms a "T" on the
other side of each slot.
• Pull up on the mat to be sure all three
straps are secured.
4
• Lay the assembly face down. Insert two
screws into the arch and tighten.
Arch
Mat
M
M
M
M
M
M
M
M
M
Large
Support
Straps
S
Screws

4
ICES-003
• This Class B digital apparatus complies
with Canadian ICES-003.
• Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference and (2) this
device must accept any interference
received, including interference that may
cause undesired operation.
NMB-003
• Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada.
• L’utilisation de ce dispositif est autorisée
seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage
et (2) l’utilisateur du dispositif doit
être prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage
est susceptible de compromettre le
fonctionnement du dispositif.
Consumer Information
FCC Statement (United States Only)
This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user's authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
CONSUMER ASSISTANC
E
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
PRINTED IN CHINA W9898pr-0920
©2011 Mattel. All Rights Reserved.

5
Battery Replacement Battery Safety
Information
In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1,5V x 2
"AA" (LR6)
For best performance, we recommend
replacing the batteries that came
with this toy with two, new "AA" (LR6)
alkaline batteries.
• Locate the battery compartment door on
the back of the arch.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver and remove it.
• Remove the exhausted batteries and
dispose of them properly. Insert two,
new "AA" (LR6) alkaline batteries.
• Replace the battery compartment door
and tighten the screws. Do not
over-tighten.
• If this product begins to operate
erratically, you may need to reset the
electronics. Slide the power/volume
switch off and then back on.
• When sounds or lights become faint or
stop, it’s time for an adult to change
the batteries!
• Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority for
recycling advice and facilities.

6
Storage
Care
Musical Fun!
WARNING
To prevent entanglement
injury, never place the gym in
a crib or playpen. Never add
strings, ties or other products
to the gym.
• Slide the power/volume switch on the
arch to ON with low volume or ON
with high volume .
• Pull the center toy on the arch for music
and lights!
• When you are finished playing with this
toy, slide the power/volume switch
OFF .
• The mat is machine washable. Wash
separately in cold water on the gentle
cycle. Do not use bleach. Tumble dry
on low.
• The frame and toys can be wiped with a
clean, damp cloth. Do not immerse
the frame.
• Press the button on top of the large
support and push toward the arch.
Power/Volume Switch
PRESS
PULL
L
L
L
L
L
L
L