Fisher-Price HEAD SPINNERTAIL W1392 User manual

Please keep this instruction sheet for future reference,
as it contains important information.
Requires three “C” batteries (LR14) alkaline batteries (not included) for operation.
Adult assembly is required.
Tool required for battery installation: Phillips screwdriver (not included).
Wipe this toy with a clean, damp cloth. Do not immerse.
This toy has no consumer serviceable parts. Do not take this toy apart.
W1392
fisher-price.com

2
Assembled Parts
Dome
Head Spinner Tail
Base

3
• At an angle, fit one end of the spinner
into tail, as shown. Push to “snap” the
other end of the spinner in place.
• Fit the tail onto the base. Push to
“snap” in place.
Assembly
• Fit the head onto the base. Push to
“snap” in place.
• “Snap” the dome onto the base.
Hint: The dome is designed to fit onto
the base one way. If it does not seem
to fit, turn it and try again.
Spinner
Dome Tail
Base
Head
1
2
3
4

Consumer Information
FCC Statement (United States Only)
This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that
interference will not occur in
a particular installation. If this equipment
does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to
try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions: (1) this
device may not cause harmful interference
and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
ICES-003
• This Class B digital apparatus
complies with Canadian ICES-003.
Operation is subject to the following
two conditions: (1) this device may
not cause harmful interference and
(2) this device must accept any
interference received, including interference
that may cause undesired operation.
NMB-003
• Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada. L’utilisation de ce
dispositif est autorisée seulement
aux conditions suivantes: (1) il ne
doit pas produire de brouillage et
(2) l’utilisateur du dispositif doit
être prêt à accepter tout brouillage
radioélectrique reçu, meme si ce
brouillage est susceptible de compromettre
le fonctionnement du dispositif.
PRINTED IN CHINA W1392a-0920
CO
N
SU
MER
ASS
I
S
T
A
N
C
E
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
©2012 Mattel. All Rights Reserved.
4

5
1,5V x 3
“C” (LR14)
Battery
Installation
• Locate the battery compartment door
on the bottom of the dino base.
• Loosen the screws in the battery
compartment door and remove the door.
• Insert three, new “C” (LR14)
alkaline batteries.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment
door and tighten the screws.
• If this toy begins to operate
erratically, you may need to reset the
electronics. Slide the power/volume
switch off and then back on.
• When sounds or motion from this
toy become faint or stop, it’s time for
an adult to change the batteries.
• Protect the environment by
not disposing of this product
with household waste
(2002/96/EC). Check your
local authority for recycling
advice and facilities.
In exceptional circumstances,
batteries may leak fluids that can
cause a chemical burn injury or ruin
your product. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the
product. Dispose of batteries safely.
Do not dispose of this product in
a fire. The batteries inside may
explode or leak.
• Never short-circuit the
battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
Battery Safety
Information

6
• Slide the power/volume switch to ON
with low volume or ON with high
volume .
• Spin the roller on the front of the dino.
• Roll a ball down the dino’s tail or drop
it in the base to see it bounce around
inside the dino, pop out or roll out
his mouth!
• When you are finished playing with
this toy, slide the power/volume
switch OFF .
Ball-popping Action!
Power/Volume Switch
Power/Volume Switch
Spin the roller
Spin the roller
Roll a ball
Roll a ball
down the
down the
tail ramp
tail ramp