Flavor Burst FB 80-08 User manual

©2014 Flavor Burst Company Printed in July Printed in
All Rights Reserved The United States of America
Flavor Burst®
Soft Serve System
Model FB 80-08
Model FB 80-26
Manufactured by
Flavor Burst Company
499 Commerce Drive
Danville, IN 46122
Phone: [phone]
Toll Free Number:
[phone]
Fax: [phone]
Warranty
An installation and warranty form is provided with every FB 80 system, located inside the FB 80 unit
with this manual. It is important that the operator carefully review the warranty and installation
documents accompanying the unit before using this system. Any questions or concerns regarding the
warranty should be clarified upon delivery or installation. For more information, contact your local
authorized Flavor Burst®distributor.
Table of Contents
Introduction…………………………………...……………………….…………………………..….…….………1
Safety Precautions……………………………..………………….………..……..….………………...…....……1
Parts Identification/Function……...……………………………….……..…..……….……………….….……...3
Daily Opening Procedures……..………………………………….…….…..…….……………….…..……….18
Daily Closing Procedures………………………………………….………..……….…………….…………….22
Replacing the Syrup Flavors…………...…………………………………..…….….……………...…………..26
Scheduled Maintenance…………...………………………………………..…….….…………………..….….30
Equipment Setup…………………………………………………………...…..………..….…………...……….44
Keypad Operations…………...…….……………………………………………………………….....……...…58
Troubleshooting Guide………………..……….……………….……………………………..…..….………….64
Directory of Cleaning Procedures……………………………………………...……………..….………….….69
Parts Replacement Schedule………...…………………………….…………………...……...….……………70
Recommended Maintenance Items Replacement Schedule………………..….……………………………71
Alternate Parts and Kits by Freezer Model……………………………………...…..…………………..…….71
Ordering/Service Information…………….…….…………………………………………………………....…..72

1
INTRODUCTION
Congratulations on your purchase of an
FB 80 series flavoring system! As a food and
beverage provider, your customers are your
greatest asset. Your primary concern must be
the health and welfare of your customers. This
manual provides everyday operating guidelines
and procedures. Special functions have been
incorporated into the equipment to provide
simple and effective cleaning and sanitizing of
your unit. We urge you to follow these
instructions carefully and maintain strict sanitary
practices in your daily operating routine.
The FB 80 series system is an add-on to a soft
serve freezer designed to inject concentrated
flavorings throughout soft serve product as it is
dispensed. To dispense a flavored product, the
operator first selects the flavor(s) from the
system keypad. The draw-handle must then be
moved into the open position while depressing
the lever on the spigot switch in a smooth
continuous motion to activate the FB 80 system
and dispense flavored product. Returning the
draw-handle to a closed position and releasing
the draw handle switch will stop product flow
and the FB 80 system.
Flavor Burst®syrup is stored within the
equipment cabinet in 1 gallon disposable bags.
Proper syrup injection rate is maintained by
adjusting the flavor level on the system keypad.
Components of the FB 80 system should be
cleaned daily to ensure the highest standard of
sanitation. When your equipment is delivered
or if it has been unused for more than 24 hours,
follow the DAILY OPENING PROCEDURES.
Always follow these safety precautions when
operating the Flavor Burst®system:
DO NOT operate the system without
reading this operator’s manual. Failure to follow
this instruction may result in equipment
damage, poor system performance, health
hazards, or personal injury.
DO NOT operate the system unless it is
properly grounded. Failure to follow this
instruction may result in electrocution.
DO NOT operate the system with larger
fuses than specified on the system data label.
Failure to follow this instruction may result in
electrocution or damage to the machine.
Consult your electrician.
DO NOT put objects or fingers in the
door spout. Failure to follow this instruction may
result in contaminated product or personal
injury from blade contact.
The FB 80 cabinet system must be
placed on a level surface capable of supporting
at least 220 lbs of weight. Failure to comply
may result in personal injury or equipment
damage.
SAFETY PRECAUTIONS

2
DO NOT install the unit in an area where
a water jet could be used, and do not use a
water jet to clean or rinse the system. Failure to
follow these instructions may result in serious
electrical shock.
NOISE LEVEL: Airborne noise emission does
not exceed 70 dB(A) when measured at a
distance of 1.0 meter from the surface of the
machine and at a height of 1.6 meters from the
floor.
NOTE: Operations Manual subject to
change. Contact your local distributor for most
recent updates concerning the FB 80 unit.

3
General System Overview (See Figure 1)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
1 ELE 430-RE-1 SPIGOT SWITCH ASSEMBLY 1 Activates Injector Assembly.
2 ELE 500 KEYPAD ASSEMBLY 1 Flavor Burst unit command center.
3 MIS 3109 KEYPAD BRACKET ASSEMBLY 1 Mounts the keypad to the freezer.
4 INJ 324 INJECTOR ASSEMBLY 1 Injects syrups into soft serve.
5 MIS 3151 ACCESSORY HANGING BRACKET 1 Stores flavor line and Injector Motor when
not in use.
6 MIS 3026 SURFACE RACEWAY (2 FEET) 1 Attaches flavor lines to side of freezer.
7 N/A CABINET ASSEMBLY 1
Houses flavor trays, electronics, and
pumps.
8 CAB 113 FLAVOR TRAY 8 Houses syrup bags.
9 SYR 943 SYRUP TUBE ASSEMBLY –
SOFT SERVE 8 Transports flavors from bag to pump.
10 SAN 740 SANITIZER TANK ASSEMBLY 1 Houses sanitizer cleaning solution.
11 SPR
5800 SPARE PARTS KIT 1 Houses extra spare parts and wear items.
12 SYR 941 SYRUP BAG ADAPTER 8 Connects bag fitment to flavor lines.
PARTS IDENTIFICATION/FUNCTIONS

4
General System Overview
Figure 1

5
Cabinet (See Figure 2)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
1 N/A ELECTRONICS SYSTEM 1 Houses microprocessor and electronics.
2 CAB 135R-
A RIGHT SIDE PANEL 1 Holds tray support brackets and panel
brackets.
3 CAB 145 TRAY SUPPORT BRACKET 8 Supports flavoring trays.
4 FAS
2024 8-32 X 1/4 PAN HEAD 28 Fastens panel brackets to divider panel, secures sides.
5 FAS
2014 8-32 X 1/2" PAN HEAD 25 Attaches top panel, back cover, and feet to cabinet.
6 ELE 483 SANITIZER PUMP CABLE 1 Provides power to the sanitizer pumps.
7 ELE 496 PUMP CABLE 1 Provides power to the syrup pumps.
8 MIS 3066 MINI BUSHING 1 Protects flush tube.
9 MIS 3028 FLUSH TUBE ASSEMBLY 1 Connects with flavor line to flush with
sanitizer solution.
10 CAB 139 FRONT DOOR PANEL 1 Provides easy access to syrup bags and
connectors.
11 CAB 136-A REAR PUMP COVER 1 Back panel to cover pumps.
12 FIX 1023 3/16" X 3/16" BARB TUBE
CONNECT 1 Splices together flush tubes.
13 CAB 134 DIVIDER PANEL 1 Holds tray support brackets and divides
flavor trays.
14 CAB
144R RIGHT PANEL BRACKET 3 Holds tray support rails.
15 CAB
144L LEFT PANEL BRACKET 3 Holds tray support rails.
16 CAB 143 LATCH BRACKET 1 Provides latching tab for front panel
latch.
17 FAS
2001 FRONT DOOR PANEL LATCH 1 Latches front door to cabinet front.
18 SYR 927 INTERNAL 9-TUBE ASSEMBLY 1 Transports syrup from bags to flavor
9-Tube Assembly.
19 SAN 748 PERISTALTIC SANITIZER PUMP 1 Pumps sanitizer solution to flush tube
and sanitizer line.
20 SYR 307 PERISTALTIC SYRUP PUMP 8 Pumps syrup from flavor bags into flavor
lines.
21 CAB
155L PUMP MOUNTING STRIP 1 Support for syrup trays and spacing between panels.
22 CAB
155R PUMP MOUNTING STRIP 1 Support for syrup trays and spacing
between panels.
23 FAS
2037 TAPPED NYLON SPACER 12 Secures screw to center panel, and
support for trays.
24 FAS
2032 STANDARD NYLON SPACERS 12 Provides extra support for flavor trays.
25 FAS
2034 8-32 X 3/4" MACHINE SCREW 12 Attaches bushings to divider panel.

6
26 MIS 3067 OPEN/CLOSED BUSHING 1 Strain relief for internal 9-Tube
Assembly.

7
ITEM PART NO. DESCRIPTION QTY. FUNCTION
27 FIX 1033 1/4" X 1/4" BLKHD (PUSH-TO-
CONNECT) 1 Connects Sanitizer Tank tube to the unit.
28 TUB 803 TUBING-PER FOOT 1 Transports sanitizer solution from tank
to pump.
29 CAB 133 BASE PANEL 1 Attaches the bottom of the inner and
side panels.
30 RUB 618 RUBBER BUMPER WITH WASHER 6 Provides spacing between cabinet base
and table.
31 FAS
2035 8-32 NUTS - EXT. LOCK WASHER 6 Attaches to screw and holds rubber bumper in place.
32 MIS 3074 SHORTY PLUG #1672 6 Covers screw hole in rubber bumper.
33 FAS
2040 6-32 X 1/4" TAPPING SCREW 24 Secures tray support bracket to side panels.
34 CAB 135L-
A LEFT SIDE PANEL 1 Holds tray support brackets and panel
brackets.
35 SYR 943 SYRUP TUBE ASSEMBLY –
SOFT SERVE 8 Transports the flavoring from the syrup bag to the syrup pump.
Cabinet
Figure 2

8
Injector Assembly and Related Parts (See Figure 3)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
1 ADPT 101A SPOUT ADAPTER WITH O-RINGS
- STANDARD 1 Attaches Injector Asmb. to most Taylor freezers & some Crown Series models.
1A RUB 642 ADAPTER O-RING 1 Creates tension to secure Adapter to
freezer door.
1B RUB 640 FLAT ADAPTER GASKET 1 Provides sealed cavity inside Adapter.
1C ADPT
101 SPOUT ADAPTER 1 Attaches Injector Asmb. to freezer door.
1D RUB 632 SPOUT ADAPTER O-RING 1 Creates tension to secure Adapter to
Injector Head.
2 INJ 322 INJECTOR HEAD ASSEMBLY 1 Connects flavor line to inject syrups into
product.
2A RUB 652-
RSS SYRUP PORT O-RING 1 Provides sealed cavity inside syrup port.
2B RUB 651 INJECTOR HEAD O-RING 2-020 1 Provides a sealed cavity.
3 INJ 321 GEAR CARTRIDGE ASSEMBLY 1 Rotates product for even syrup
distribution.
4 SYR 932 6' 9-TUBE ASSEMBLY 1 Supplies syrup to Injector Head from
pumps.
4A FAS
2051 ROLLED FLANGE EYELET 18 Provides tension in syrup line to affix to line coupler.
4B ROT 510 LINE COUPLER 2 Holds flavor lines in place.
4C RUB 610 BAG CONNECTOR O-RINGS 1 Provides extra tension between tube
connectors.
4D ROT 515-A 9-TUBE ASSEMBLY. WAVE SPRING 1 Provides tension between tube
connectors.
4E INJ 116 LINE COUPLER NUT - BLACK 1 Attaches flavor tubes to Manifold.
4F SYR 901 6' 9-TUBE ASSEMBLY TUBES 9 Transports syrup from pump to Injector
Head.
4G ROT 511 LINE COUPLER NUT 1 Connects flavor lines to the internal
9-Tube Assembly.
4H RUB 602 9-POS TUBE CONN. GASKET 1 Provides sealed cavity.
5 INJ 117 TUBE CONNECTOR BODY -BLACK 1 Secures Syrup Line Manifold to flavor
lines.
6 MIS 3142 FLAVOR LINE DUST CAP - FB 80 1 Covers Manifold when not
connected.
7 INJ 201 SYRUP MANIFOLD - BLACK 1 Connects flavor line to Injector Head.
8 RUB 601 9-POS DUCKBILL CHECK VALVE 1 Provides sealed cavity and prevents
syrup leakage.
9 MIS 3143 INJECTOR SUSPENSION BRACKET 1 Secures Injector Asmb. to freezer door.
9A FAS
2107 INJECTOR BRACKET KNOB 1 Tightens positioning of hanging bracket.
9B MIS 3144 NYLON SHOULDER WASHER 1 Allows free horizontal movement for
bracket.

9
ITEM PART NO. DESCRIPTION QTY. FUNCTION
9C MIS 3143-A INJECTOR BRACKET PART A 1 Attaches to freezer door bolts to hang
Injector Assembly.
9D ROT 535 INJ. BRACKET SPRING WASHER 1 Allows space between hanging and
base brackets.
9E MIS 3143-B INJECTOR BRACKET PART B 1 Secures bracket assembly to Injector
Assembly.
10 INJ 323 INJECTOR ASMB. / NO HEAD 1 Powers the Injector System.
10A INJ 330 INJECTOR MOTOR ASSEMBLY 1 Powers the Injector Assembly to inject
syrup into product.
10B INJ 331 INJECTOR GEARBOX ASSEMBLY 1 Gears turn Gear Cartridge to allow even
syrup distribution.
10C FAS
2023 ACCESSORY MOUNTING BRKT KNOB 1 Secures base Suspension Bracket to Gearbox.
11 MIS 3151 ACCESSORY HANGING BRACKET 1 Stores flavor line and Injector Motor
when not in use.
12 MIS 3026 SURFACE RACEWAY (2 FEET) 1 Attaches flavor lines to side of freezer.
13 ADPT
8750-A SPOUT ADAPTER W/ O-RINGS –
ALTERNATE 1 Attaches Injector Assembly to most
Taylor Crown Series freezers.
13A RUB 645 ADAPTER O-RING FOR
ALTERNATE
ADAPTER 1 Creates tension between Adapter and
freezer door.
13B ADPT 8750
SPOUT ADAPTER - ALTERNATE 1 Attaches Injector Asmb. to freezer door.
13C RUB 632 SPOUT ADAPTER O-RING 1 Creates tension to secure Adapter to
Injector Head.
Injector Assembly and Related Parts
Figure 3

10
Syrup Pump and Related Parts (See Figure 4)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
1 N/A SOFT SERVE SYRUP PUMP 8 Pumps syrup from flavor bags to flavor
lines.
1A SYR 307 PERISTALTIC SYRUP PUMP 1 ea. Pumps syrup from flavor bags to flavor
lines.
1B TUB 806 1/8” SYRUP PUMP REPL TUBE 1 ea. Transports syrup through pump.
1C FAS
2066 SYRUP PUMP TUBE WASHER-1/4 1 ea. Secures pump tube.
1D FAS
2067 SYRUP PUMP CLAMP-HOSE-1/4" 1 ea. Prevents pump tube from slipping.
1E FAS
2051 ROLLED FLANGE EYELET 1 ea. Creates tension for tighter fit.
1F FIX 1036 1/4" TO 1/4" OD UNION ELBOW 1 ea. Connects syrup in tube to pump.
1G FIX 1035 1/4 TO 3/16 OD REDUCING UNION 1 ea. Connects syrup pump to flavor line out.
2 SYR 943 SYRUP TUBE ASSEMBLY –
SOFT SERVE 8 Transports flavor from bag to pump.
2A FIX 1049 COUPLING-1/8"NPT FB80 1 ea. Connects flavor line to flavor bag.
2B FIX 1047 ELBOW-BARBED TUBE PORT
FB80 1 ea. Connects flavor in tube to bag fitment.
2C TUB 811 TUBE-SILICONE .188X.375 PE
FB80 1 ea. Connects barb fitment to tube port.
2D FIX 1048 FITTING-1/4X1/4 BARB FB80 1 ea. Connects syrup tube to silicone tube.
2E SYR 902 FLAVOR-IN TUBE 1 ea. Carries syrup from syrup bag to pump.
3 SYR 901 6' 9-TUBE ASSEMBLY TUBE 9 Brings syrup from pump to Injector
Head.
4 ROT 511 LINE COUPLER NUT 1 Connects flavor lines to the internal 9-
Tube Assembly.
5 ROT 512 TUBE CONNECTOR BODY 1 Connects internal 9-Tube Assembly to
flavor lines.
6 ROT 510 LINE COUPLER 1 Holds flavor lines in place.
7 FAS
2051 ROLLED FLANGE EYELET 9 Secures flavor lines to line coupler.
8 MIS 3023 FLAVOR LINE DUST CAP 1 Cover to protect end of flavor lines.
9 SYR 941 SYRUP BAG ADAPTER 8 Connects bag fitment to flavor lines.
9A SYR 940 SYRUP BAG ADAPTER CAP 1 ea. Attaches to flavor bag fitment.
9B SYR 939-A SYRUP BAG ADAPTER VALVE
ASSEMBLY 1 ea. Transports syrup to quick connect
fitment.
9C RUB 632 SYRUP BAG ADAPTER O-RING 1 ea. Provides sealed cavity for Syrup Bag
Adapter.
10 CAB 113 FLAVORING TRAY 8 Houses syrup bags.
11 ELE 496 PUMP CABLE 1 Supplies power to the pumps.

11
Syrup Pump and Related Parts
Figure 4

12
Sanitizer Pump and Related Parts (See Figure 5)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
1 SAN 748 SANITIZER PUMP ASSEMBLY 1 Supplies sanitizer to flush tube.
2 TUB 807 SANITIZER TUBE REPLACEMENT 1 Transports sanitizer through pump.
3 MIS 3023 DUST CAP 1 Cover to protect end of flavor lines.
4 FAS
2051 ROLLED FLANGE EYELET 1 Creates tension for tighter fit 1 per
pump, 9 per tube assembly.
5 ROT 510 LINE COUPLER 1 Holds flavor lines in place.
6 ROT 512 TUBE CONNECTOR BODY 1 Connects internal 9-Tube Assembly to
flavor lines.
7 ROT 511 LINE COUPLER NUT 1 Connects flavor lines to the internal
9-Tube Assembly.
8 SYR 901 6' 9-TUBE ASSEMBLY TUBES 9 Transports syrup and sanitizer from
pumps to Injector Assembly.
9 FIX 1035 1/4 TO 3/16 OD REDUCING UNION 1 Connects elbow to sanitizer line.
10 FIX 1042 TUBE-TO-TUBE ELBOW 1 Connects pump tube to reducing union.
11 SYR 931 CLEAR TUBING 1 Transports sanitizer to Pump Flush
Adapter.
12 FIX 1043 1/4" IDX1/8 90 DG BARB FITTING 1 Connects sanitizer line to sanitizer
pump.
13 FIX 1017 1/8" FEMALE TEE 1 Connects fitments to Sanitizer Tank,
flush line and pump.
14 FIX 1034 3/16" ID BARB X 1/8" NPT ELBOW 1 Connects sanitizer line to Pump Flush
Adapter.
15 FIX 1044 1/4" TUBE X 1/8" NPT 1 Connects sanitizer line to flush adapter
and pump lines.
16 TUB 803 .17 x 1/4 LDPE TUBING-PER FOOT 1 Transports sanitizer solution from tank
to sanitizer pump.
17 FIX 1036 1/4" TO 1/4" OD UNION ELBOW 1 Connects sanitizer tube to supply tube.
18 SAN 715 SUPPLY TUBE CAP 1 Fastens grommet securely to tank.
19 RUB 615 FEEDER TUBE RUBBER
GROMMET 1 Holds sanitizer tube in place and seals tank hole.
20 SYR 902 SANITIZER SUPPLY TUBING 1 Supplies sanitizer from Sanitizer Tank.
21 SAN 734 HAND PUMP ASSEMBLY-FLUTED
TANK 1 Seals Sanitizer Tank and adds pressure
when needed.
22 SAN 701 SANITIZER TANK 1 Holds sanitizer solution.
23 MIS 3028 FLUSH TUBE ASSEMBLY 1 Connects with flavor line to flush with
sanitizer solution.
24 FIX 1023 3/16" X 3/16" BARB TUBE
CONNECT 1 Splices together flush tubes.

13
Sanitizer Pump and Related Parts
Figure 5

14
Electronic Parts and Connections (See Figure 6)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
1 ELE 500 KEYPAD ASSEMBLY 1 Flavor Burst unit command center.
2 ELE 430-RE-1 SPIGOT SWITCH ASSEMBLY 1 Activates Injector Assembly.
3 INJ 330 INJECTOR MOTOR ASSEMBLY 1 Powers the Injector Assembly to inject
syrup into product.
4 MIS 3109 KEYPAD BRACKET ASSEMBLY 1 Mounts the keypad to the freezer.
4A MIS 3080 KEYPAD MOUNTING PLATE 1 ea. Attaches to freezer to mount keypad
bracket.
4B MIS 3103 KEYPAD MOUNTING BRACKET 1 ea. Holds keypad in place.
4C FAS
2023
ACCESSORY MOUNTING
BRACKET
KNOB 2 ea. Fastens keypad bracket to mounting
plate.
5 ELE 434 POWER CABLE 1 Supplies the electronics board with
power.
6 CAB 137-
A ELECTRONICS COVER 1 Protects and covers the electronics microprocessor.
7 FAS
2014 8-32 X 1/2" PAN HEAD 15 Secures cover panel to base and ground wire to nut.
8 MIS 3150 FLAVOR BURST LOGO DECALS 1 Displays Flavor Burst trademark logo.
9 FAS
2024 8-32 X 1/4 PAN HEAD 5 Secures microprocessor and power
module to base.
10 ELE 485 120V POWER ENTRANCE MODULE 1 Power source inlet.
11 CAB 156 CONNECTOR SHIELD 1 Protects power cables from liquids;
splash guard.
12 ELE 501 MICROPROCESSOR 1 Main power supply.
13 FAS
2081 STEEL CABLE CLAMPS 2 Strain relief to prevent chords from
being detached.
14 CAB 138-
A ELECTRONICS BASE PANEL 1 Secures microprocessor.
15 N/A GROUNDING WIRE 1 Grounds electricity.
16 FAS
2035 8-32 NUTS - EXT. LOCK WASHER 1 Secures ground wire to screw and
panel.

15
Electronic Parts and Connections
Figure 6

16
Spare Parts Kit (See Figure 7)
ITEM PART NO. DESCRIPTION QTY. FUNCTION
1 SPR
5800 SPARE PARTS KIT – SOFT SERVE 1 Houses extra spare parts and wear
items.
2 INJ 321 GEAR CARTRIDGE 1 Rotates product for even syrup
distribution.
3 RUB 601 9-POS DUCKBILL CHECK VALVE 1 Provides sealed cavity and prevents
syrup leakage.
4 RUB 632 LOWER ADAPTER O-RING 1 Creates tension to secure Adapter to
Injector Head.
5 RUB 640 FLAT ADAPTER GASKET FOR
ADPT 101A ADAPTER 1 Provides sealed cavity inside Adapter.
6 RUB 642 UPPER ADAPTER O-RING FOR
ADPT 101A ADAPTER 1 Creates tension to secure Adapter to
freezer door.
7 RUB 602 9-POS TUBE CONN. GASKET 1 Provides sealed cavity.
8 RUB 652-
RSS SYRUP PORT O-RING 1 Provides sealed cavity inside syrup port.
9 RUB 651 INJECTOR HEAD O-RING 2-020 1 Provides a sealed cavity.
10 INJ 201 SYRUP MANIFOLD - BLACK 1 Connects flavor line to Injector Head.
11 ELE 430-RE-
1 SPIGOT SWITCH 1 Activates Injector Assembly.
12 INJ 117 TUBE CONNECTOR BODY -BLACK 1 Secures Syrup Line Manifold to flavor
lines.
13 ELE 444 1 AMP, 1 1/4" SLOW BLOW FUSE 2 System overload protection.
14 RUB 645 UPPER ADAPTER O-RING FOR
ADPT 8750-A ADAPTER 1 Creates tension to secure Adapter to
freezer door.

17
Spare Parts Kit
Figure 7

18

19
DAILY OPENING PROCEDURES
NOTE: YOUR HANDS SHOULD BE CLEANED
AND SANITIZED BEFORE YOU PERFORM
THE FOLLOWING PROCEDURES.
NOTE: THE FOLLOWING PROCEDURES
REQUIRE APPROVED, SERVICEABLE AND
SANITIZED TOOLS AND BRUSHES.
CONTACT YOUR LOCAL DISTRIBUTOR FOR
RECOMMENDED SUPPLIES.
NOTE: USE AN APPROVED CLEANER AND
SANITIZER FOR THE FOLLOWING
PROCEDURES. REFER TO
MANUFACTURER’S INSTRUCTIONS FOR
PROPER PREPARATIONS OF THESE
CLEANING AGENTS.
NOTE: INSPECT ALL WEAR ITEMS AND
REPLACE IF NECESSARY.
Ensure that the Injector System has been
disassembled and cleaned according to the
DAILY CLOSING PROCEDURES. This is
typically performed at the close of the previous
business day.
Sanitizing the Injector System
1. Prepare an approved sanitizer solution
according to manufacturer’s instructions.
2. Place the Gear Box, Suspension Bracket,
Gear Cartridge, and Injector Head in
approved sanitizer solution and soak for 1
minute. (See Figure 8.)
Figure 8
3. Remove each part from the sanitizer
solution. Place the items on a sanitary tray
to air dry. (See Figure 9.)
Figure 9
4. Remove the Manifold cap and set it on a
sanitary tray. Spray the Syrup Line
Manifold opening with approved sanitizer
solution and allow it to sanitize for at least 1
minute. (See Figure 10.)
Figure 10
5. Hang the 9-Tube assembly on the 9-Tube
and Drive Motor Bracket to dry. (See
Figure 11.)
Figure 11