Floe VSD User manual

ASSEMBLY INSTRUCTIONS
SPREADER LIGHT 12/24V
V-LIFT & VSD LIFTS
TOOLS REQUIRED
•7/16” SOCKET/WRENCH
•WIRELESS SYSTEM INSTRUCTIONS
For more information, go to the owner support tab on the FLOE website
1
*WIRELESS KIT (P/N 511-00832-01) IS REQUIRED (NOT INCLUDED).

2
BILL OF MATERIALS/EXPLODED VIEW
P/N 511-00842-00 SPREADER LIGHT, 12/24 - BLACK
NUMBER PART NUMBER QTY. DESCRIPTION
1 001-70010-00 1 HHCS, 1/4-20 X 1-3/4” 18-8 SS
2 001-75001-00 1 NUT, NYLOCK 1/4-20 ALUM.
3 002-05605-00 1 ADAPTER, SPREADER LIGHT
TO PRE 2024 WIRELESS
4 111-00838-00 1 ASS’Y, LIGHT 12/24V - BLACK

3
INSTALLATION
NOTE: INSTALL THE WIRELESS RECEIVER TO THE MAST FIRST. WITH THE 1/4” NYLOCK NUT
REMOVED, INSTALL THE BOLT ATTACHED TO THE LIGHT INTO THE WIRELESS MAST (FIGURE 1.1).
FOR WIRELESS SYSTEMS SOLD PRIOR TO 2024, PLACE THE SUPPLIED ADAPTER INTO THE 1”
HOLE IN THE MAST BELOW WHERE THE WIRELESS RECEIVER MOUNTS (FIGURE 1.1A).
FIGURE 1.1
FIGURE 1.1A

4
CONNECT THE PLUG ON THE LIGHT TO THE MATCHING PLUG ON THE WIRELESS RECEIVER.
INSTALL THE 1/4” NYLOCK NUT ONTO THE BOLT (FIGURE 1.2) AND TIGHTEN TO SNUG TO
REMOVE PLAY IN THE BOLT (FIGURE 1.3). USE THE BUTTON ON THE REMOTE TO TURN LIGHT
ON AND OFF. THE LIGHT REMAINS ON FOR 15 MINUTES BEFORE AUTOMATICALLY TURNING
OFF.
FIGURE 1.2
FIGURE 1.3

5
NOTES

6
NOTES

7
NOTES

8
FLOE INTERNATIONAL, INC.
48473 STATE HIGHWAY 65 • McGREGOR, MN 55760
www.floeintl.com
All material copyright © 2023 FLOE International, Inc.
Specifications subject to change without notice.
P/N 611-00842-00 9/8/23